@@TomMason-io1yn that’s something I will do for now on. I have one sitting in my garage that has sat there for years. Never really had a need for it.
@ChainerGuy27814 сағат бұрын
It's a fox. Now get back to work!
@johnathanpeyton14 сағат бұрын
Oops 🦊
@steverowe42923 күн бұрын
I've seen people cut holes into the ac compartment to clean the condensor. This is even simpler! I have to go try this.
@johnathanpeyton3 күн бұрын
@@steverowe4292 I would rather not cut holes in my very expensive haha
@brandtman05..6 күн бұрын
Lot of squatters in Rio Linda. I see it all the time
@johnathanpeyton6 күн бұрын
@@brandtman05.. it’s definitely sad to see but it’s life I guess
@johnathanpeyton8 күн бұрын
I would say maybe $400 worth this is the old style metal so it’s thicker than what they sell these days I think
@user-xx3pk8mg8o8 күн бұрын
Gang of scrap
@JackofHaulTrades11 күн бұрын
That's a good pay day!
@johnathanpeyton11 күн бұрын
@@JackofHaulTrades it was nice to get rid of a lot of the metal and to get some decent money for it
@JackofHaulTrades14 күн бұрын
Dang they have a ton of trucks!
@johnathanpeyton14 күн бұрын
@@JackofHaulTrades he has two more that we’re not on site. He also owns another Junk Patrol out in Nevada with the same amount, but he’s looking to get out of the Junk removal business and just do demolition
@duanemorrison617315 күн бұрын
I appreciate the information and the demonstration. I've wondered what would happen if i washed the inside out with a hose. Thanks!
@scrapinmaster363417 күн бұрын
did you dump just that boat? if so, what was the approximant weight?
@johnathanpeyton17 күн бұрын
@@scrapinmaster3634 from what I remember, I filled the trailer with trash and half of a demolished RV. The boat itself was around 1800 pounds.
@johnsmith-wd5sq18 күн бұрын
I dont even own that machine but i still found it interesting! Thanks!
@johnathanpeyton18 күн бұрын
Glad to hear that you liked the video
@JackofHaulTrades18 күн бұрын
I own a mini skid and found it interesting as well 😂
@johnathanpeyton18 күн бұрын
@@JackofHaulTrades time to step it up and buy an excavator or a bigger skid bro it’s calling your name buy us buy us haha
@JackofHaulTrades18 күн бұрын
@johnathanpeyton haha one day bro! I gotta pay down some debt before I sign up for more 😂
@JackofHaulTrades20 күн бұрын
Having equipment at home sure makes life a lot easier!
@johnathanpeyton20 күн бұрын
@@JackofHaulTrades hell yea it does I would have had to take the boats to the river to swap and hope I would even make it there and back with the condition that trailer is in haha
@JackofHaulTrades20 күн бұрын
@@johnathanpeyton 😂
@papecat20 күн бұрын
first
@johnathanpeyton20 күн бұрын
@@papecat hope you enjoyed the short video
@Fatlolojr21 күн бұрын
What type of mother you putting in it?
@johnathanpeyton21 күн бұрын
@@Fatlolojr it has a Volvo penta aq125 four-cylinder I’m gonna put the one size up Volvo penta at130 or 135 four-cylinder in it. Supposedly the bell housings are the same.
@Fatlolojr21 күн бұрын
@@johnathanpeyton forward to see this thing!
@JackofHaulTrades22 күн бұрын
Lol he doesn't deserve a truck
@johnathanpeyton22 күн бұрын
@@JackofHaulTrades right lol
@Ferezbrown22 күн бұрын
Get your ass back to work
@Ferezbrown22 күн бұрын
Your the loser picking it up
@JackofHaulTrades23 күн бұрын
Heck yeah!!
@JackofHaulTrades23 күн бұрын
100%
@JackofHaulTrades23 күн бұрын
That much is awesome!
@johnathanpeyton23 күн бұрын
@@JackofHaulTrades it’s a good little machine that takes a getting used to, I poked my fingers five times yesterday lol
@rjacosta107024 күн бұрын
This machine will be helpful for all the meth heads
@johnathanpeyton24 күн бұрын
@@rjacosta1070 very true haha
@mahdirezaei993224 күн бұрын
You need to work on your editing. u could make this short more engaging.
@johnathanpeyton24 күн бұрын
@@mahdirezaei9932 I know I’m not that good at it still trying different things
@ronaldoxavier553125 күн бұрын
Hi we have a skid skeeter Kubota svl 75-2 with fuel issues, first start run good but when need power engine fail and shutdown, drive forward and reverse perfect need power engine show me failure fuel, any codes, all filters new and check common rail and pipes, Ps. New fuel injectors from Kubota, Do you have any information about it?
@johnathanpeyton25 күн бұрын
@@ronaldoxavier5531 I personally have not had any fuel related issues with mine yet, but I would check the injection pump solenoid that lets fuel into it. These new tractors are so compact and it’s hard to see and or get to anything
@ronaldoxavier553125 күн бұрын
@@johnathanpeyton absolutely, thank you,
@JackofHaulTrades28 күн бұрын
I love to see all the ways you make money it's very motivational!
@johnathanpeyton28 күн бұрын
@@JackofHaulTrades can’t just rely on one skill trade of work have to learn multiple and try to be a master of some
@JackofHaulTrades28 күн бұрын
@@johnathanpeyton I agree 👍
@dcskate102228 күн бұрын
Zero chance you made $3000 off that. No one wants a junk 350 and alpha outdrive. They’re a dime a dozen.
@johnathanpeyton28 күн бұрын
@@dcskate1022 not a 350 it’s a 4.3 $1000 for the engine $300-500 for complete out drive $500-1000 trailer Boat removal $500 It all ads up if I wasn’t selling the stuff I wouldn’t be doing this
@dcskate102228 күн бұрын
@@johnathanpeyton even worse. No one wants a 4.3 period. I’m a marine mechanic, you’re going to be incredibly disappointed
@johnathanpeyton28 күн бұрын
@@dcskate1022 I already have three people interested in this motor I’ll prove my point. This is not the first 4.3. I’ve sold. The 4.3 is notorious for losing oil pressure and having a Rod knock because of oil pump failure People leaving water in the engine, not winterizing the boat, exhaust manifold, cracking, and the blocks cracking Not trying to argue with your knowledge just trying to show you things that I have learned
@johnsmith-wd5sqАй бұрын
That was Pretty Cool! Thanks for bringing us along! Cant wait to see the destruction!
@johnathanpeytonАй бұрын
@@johnsmith-wd5sq thanks for the comment. Hope to get to the RV in a couple days. I’m already tired of seeing it. Haha
@JackofHaulTradesАй бұрын
Love the gopro footage! You did a heck of job loading that motor home 🫡
@johnathanpeytonАй бұрын
@@JackofHaulTrades I have been trying new ways to record, glad you liked it.
@50hellkat2Ай бұрын
How do you get it out? A wrench? What size?
@johnathanpeytonАй бұрын
@@50hellkat2 Best way to completely drain the engine 2 ways to do it Jack the boat up in the front as high as you can Use a adjustable wrench depending on your style engine Some have drain plug with built in dip stick some are just a drain plug 14-17 mm box end wrench Drain oil / water mix from engine to the under area of the engine put a catch pan under the back of boat drain plug Or get in the boat put a small drain pan under the engine if you have enough room and drain the oil mix in it might have to use to pans one to drain the oil mix into And one to transfer the liquid into another pan so you can continue to drain it Hope this makes sense
@JackofHaulTradesАй бұрын
Great video John! Your equipment is awesome 👌 Keep hustling brother 💪🫡
@johnathanpeytonАй бұрын
@@JackofHaulTrades thanks man the machines are making that money
@JackofHaulTradesАй бұрын
@johnathanpeyton they sure are! Also, great editing skills with that drone 👏 I gotta get on your level :)
@8978MartyАй бұрын
I was up in Colfax this weekend. Hope you’re doing ok
@johnathanpeytonАй бұрын
@@8978Marty doing good so far thanks for asking
@mattcummings4990Ай бұрын
I have a similar setup and noticed my hydraulics getting quite a bit hotter than normal operating temps pushing 175-180 degrees. Have you had any issues?
@johnathanpeytonАй бұрын
@@mattcummings4990 to be honest, I’m not sure what temperatures mine has gotten but once my temperature gauge rises above half I know I need to do something to get it cooled down I have a rooftop cooler I just haven’t installed it yet. I had one installed on my 95. It didn’t seem to do too much difference. Every 30 minutes I usually get out and blow out the radiator, to really get it cooled down. You need to wash the radiator out. I had a caterpillar with a reversible fan and it got hot just like the Kabota does the reversible didn’t do that great of a difference.
@JackofHaulTradesАй бұрын
Those end results were phenomenal! I hope you made good money on that job 💪
@JackofHaulTradesАй бұрын
Good hustle brotha! I hope it wasn't a Hero 12 😢
@Venturewest1Ай бұрын
Glad you posted this vid. I am running into the same issue with my SCL1000. The aux wouldn't run the trencher so we wiggled the wires and it started working but then, when the trencher wasn't hooked up the machine would somehow engage the auxillary and make the machine die when digging. I need to dig into this tomorrow. I will definitely figure out how to rewire.
@johnathanpeytonАй бұрын
@@Venturewest1 I rewired it once lasted a few months ended up just buying a new control. Hasn’t messed up yet. The wires rub on the hole that they go through and ends up cutting them.
@JackofHaulTradesАй бұрын
I need that grapple!
@johnathanpeytonАй бұрын
@@JackofHaulTrades I have one for the mini skid also both work great
@JackofHaulTradesАй бұрын
That excavator never fails to amaze me. One day I'll be cool like you 😂💪
@johnathanpeytonАй бұрын
@@JackofHaulTrades you’re already cooler than me Mr. 3000 subscribers lol
@JackofHaulTradesАй бұрын
@@johnathanpeyton lol
@JackofHaulTradesАй бұрын
This excavator is a money making machine! I need one
@johnathanpeytonАй бұрын
@@JackofHaulTrades the kx057 has been the best Excavator that I’ve owned so far it hasn’t let me down yet and it has demolished anything I’ve thrown at it
@right8630Ай бұрын
Get you a -3 instead. A lot better ours comes in on Monday.
@johnathanpeytonАй бұрын
@@right8630 I bought a new 75-2 about 1-2 years ago and then the -3 came out fml lol Just like when you buy a new phone, the day after you buy it, the better model comes out the next day
@scottshaw3523Ай бұрын
Good stuff! Thanks for sharing. Would a mini skid with a grapple tear that apart?
@johnathanpeytonАй бұрын
@@scottshaw3523 I’m sure you could but it would take a bit longer I would recommend using an Excavator even if you have to rent one they have more strength and reach
@scottshaw3523Ай бұрын
@@johnathanpeyton good point! Thanks
@johnsmith-wd5sqАй бұрын
You really couldnt tell how dirty it was until you hit it with the Water, Then Wow! That was crazy all that dirt. I guess you are correct on keeping that stuff cleaned out!
@johnathanpeytonАй бұрын
If you’re working in a dusty environment or brushclearing Blackberrybush or any fine material it’s best to blow out the radiator every couple hours and wash it out two times a day if the temperature does not go down with blowing it out If you wash the radiator, you need to dry it out before you use the equipment in the dusty environment. Otherwise, the dust will attach itself to the wet radiator and it will clog up faster.
@johnsmith-wd5sqАй бұрын
Thanks for all that knowledge! I learned more in the last 10 minutes than i did in the last 20 years!
@johnathanpeytonАй бұрын
@@johnsmith-wd5sq glad I could help These are just things I have learned over the years from buying and selling boats and also getting boats as projects and finding out they were total trash
@JackofHaulTradesАй бұрын
That power is impressive
@johnathanpeytonАй бұрын
@@JackofHaulTrades yes this thing, a monster, rips it all apart quite easily
@johnathanpeytonАй бұрын
The local recovery station takes 2 a day for free
@JackofHaulTradesАй бұрын
Where do you get rid of those fridges?
@crbrepairmotorcycles66082 ай бұрын
Looking for a used fishing boat so thought I would watch this
@johnathanpeyton2 ай бұрын
I hope it helps in anyway
@Captain_Zero_2 ай бұрын
Freeze plugs don't work because they are not freeze plugs. I know they are commonly referred to as such, and they can pop out in the event of a freeze. "Freeze plugs" are actually plugs used to cover the holes used for sand removal after casting. They are not engineered to prevent damage from freezing.
@johnathanpeyton2 ай бұрын
One would hope that they would serve two different purposes
@Ajaxaxxess2 ай бұрын
No such thing as a "free boat". Good video bud!!
@johnathanpeyton2 ай бұрын
Very true it always cost you something time and money
@JackofHaulTrades2 ай бұрын
Great video. Lots of good info 👍
@JackofHaulTrades2 ай бұрын
You have more boats at your house than Craigslist has for sale! Keep grinding brother you will get out of debt here soon 💪🫡
@johnathanpeyton2 ай бұрын
If I keep getting free boats and selling them I’ll be good haha
@Tjbensinnington2 ай бұрын
Nice find, i got 2 pressure washers at the dump a few weeks back, cleaned the bowl carburetors up and new spark plugs and they both work perfectly, start with the first pull, crazy what people wil lthrow away, got a few weed eater im tryna fix now, but weed eaters always give me trouble
@johnathanpeyton2 ай бұрын
Heck Yeah, I love free stuff My buddy found a Husqvarna chainsaw at the dump a few years back and he gave it to me. Absolutely nothing wrong with it. I still have it to this day.