Waterproof Cable Connector M16
2:53
Пікірлер
@TheOriginalWakko
@TheOriginalWakko Күн бұрын
The roaches on the wall appreciate your work 😁😁
@CityBoyLiew
@CityBoyLiew 22 сағат бұрын
I think I scared them off.
@jenniferj7588
@jenniferj7588 2 күн бұрын
Why didn't they put foam rubber in the gap first so you do not have to use alot of sealant and use tape to get a straigt line too ...Just a thought ...
@CityBoyLiew
@CityBoyLiew 2 күн бұрын
I have requested for it but I think they have forgotten to bring that day!
@bianka03309
@bianka03309 3 күн бұрын
Omg thank you! This was super helpful and fast!
@CityBoyLiew
@CityBoyLiew 3 күн бұрын
I know. Welcome to visit my free channel.
@TradeWinds66
@TradeWinds66 3 күн бұрын
Is that a Singaporean accent i hear?
@SahimHossain-6b-3104
@SahimHossain-6b-3104 3 күн бұрын
Cuxtxixfixx
@Justebaying
@Justebaying 4 күн бұрын
That's a good fingering technique......
@marzgtp
@marzgtp 9 күн бұрын
That looks like trash!
@CityBoyLiew
@CityBoyLiew 6 күн бұрын
That’s why worth sharing so that people will learn from mistakes.
@zecazura7816
@zecazura7816 15 күн бұрын
Background music a bit spoiled, like the way u doing your job and explain
@CityBoyLiew
@CityBoyLiew 15 күн бұрын
Thanks for the feedback.
@JanetFlores-rn5uj
@JanetFlores-rn5uj 16 күн бұрын
Saan po ba pwede po mgbili nyan
@4G12
@4G12 16 күн бұрын
Nice warm white colour and beam pattern. 👍
@CityBoyLiew
@CityBoyLiew 16 күн бұрын
Please visibly channel again.
@maheshbonta2297
@maheshbonta2297 16 күн бұрын
Sealent name plz
@CityBoyLiew
@CityBoyLiew 15 күн бұрын
Not recommended.
@marlonalonsosuarezmeza7527
@marlonalonsosuarezmeza7527 17 күн бұрын
Hola..muchas gracias!
@CityBoyLiew
@CityBoyLiew 17 күн бұрын
De nada. ¡Tu apoyo al suscribirte a mi canal me motiva a seguir creando más vídeos gratis! No dudes en volver a visitarlo.
@loldefender7289
@loldefender7289 19 күн бұрын
Btw you can use a multimeter in diode mode to test an led
@CityBoyLiew
@CityBoyLiew 18 күн бұрын
What does it show if the LED is good?
@ExtremelifeZue
@ExtremelifeZue 20 күн бұрын
boleh support sd card apa jenama?
@CityBoyLiew
@CityBoyLiew 20 күн бұрын
Asalkan Class 3 dan atas. Advise to get extreme type so that it can withstand hot weather.
@ExtremelifeZue
@ExtremelifeZue 12 күн бұрын
​@@CityBoyLiew bole guna type c cable sendiri ke bos sbb nak cucuk dekat usb port...xnak guna dekat pencucuh rokok
@CityBoyLiew
@CityBoyLiew 12 күн бұрын
@ExtremelifeZue so far ok. Pastikan USB outlet cukup ampere. 5V 2Amp.
@CityBoyLiew
@CityBoyLiew 12 күн бұрын
@ExtremelifeZue Recommend juga ada delay start supaya engine kereta cukup tenaga untuk kick start setiap kali.
@CityBoyLiew
@CityBoyLiew 12 күн бұрын
@ExtremelifeZue Delay start USB car outlet replacing Android car player USB kzfaq.info/get/bejne/j59nmLOrrr6dcqc.html
@scottmcauley5781
@scottmcauley5781 21 күн бұрын
Should have used a backing rod and did it in a few runs of the caulking. 2 to 3 thin runs of caulking, letting them fully dry between each application.
@CityBoyLiew
@CityBoyLiew 20 күн бұрын
Good to know. I will try this trick. Thank you for sharing.
@kovijobman4143
@kovijobman4143 21 күн бұрын
Палец - лучший инструмент, который всегда с тобой!...
@UbbeWankenubbe
@UbbeWankenubbe 22 күн бұрын
So - does it work or not?
@CityBoyLiew
@CityBoyLiew 21 күн бұрын
I found that my indoor air quality improved after 100days using it.
@muhammadnaimhussin753
@muhammadnaimhussin753 22 күн бұрын
Very helpfull. tq
@CityBoyLiew
@CityBoyLiew 21 күн бұрын
Thank you for your support.
@GiveThx4Him
@GiveThx4Him 23 күн бұрын
Yup…I’m taking it to Best Buy & letting them install it.😂 Great video by the way.
@CityBoyLiew
@CityBoyLiew 23 күн бұрын
You can now understand why they are doing it the way it is.
@navifdk0478
@navifdk0478 23 күн бұрын
Jb buttons ko smjhna tha TB vedio fast krdi
@CityBoyLiew
@CityBoyLiew 15 күн бұрын
Make sure viewers don’t miss out on the steps.
@makaylajones853
@makaylajones853 25 күн бұрын
Thank you this helped a lot!
@CityBoyLiew
@CityBoyLiew 25 күн бұрын
Yes, I know. I almost change the TV!!!
@syaifuliezzam8168
@syaifuliezzam8168 25 күн бұрын
Hi, can you give me the link app gps for pc. 😊
@CityBoyLiew
@CityBoyLiew 25 күн бұрын
Try this if the link work: www.arphafr.com/pages/download
@syaifuliezzam8168
@syaifuliezzam8168 23 күн бұрын
Thanks @CityBoyLiew., for information malaysia user, set a time zone utc +8 🇲🇾
@JohnCarroll-rd6hh
@JohnCarroll-rd6hh 26 күн бұрын
Spot on... took two goes but works well
@CityBoyLiew
@CityBoyLiew 25 күн бұрын
Well done! 👍🏼
@georgemarcos8688
@georgemarcos8688 26 күн бұрын
Hi dear I have a question please, does any of the radiator or A/C fans in this csr have 2 speeds? Low and high? or one speed for both. Tanks
@CityBoyLiew
@CityBoyLiew 25 күн бұрын
I think there are eight or nine speeds. The speed increases when you turn the knob. If you notice there are only two speed then either you have a bad contact or the resistance module for the blower has malfunction.
@georgemarcos8688
@georgemarcos8688 25 күн бұрын
@CityBoyLiew eight or 9 speeds Oh, that's too much spee I don't know how to know if the fans are ok
@user-zn1en2ug4c
@user-zn1en2ug4c 28 күн бұрын
Thank omg, this writing on the screen was driving me and my wife crazy. Thanks to you we can now watch Netflix with that crap on the corner off the screen. This method works 100%. Have a great day.
@CityBoyLiew
@CityBoyLiew 27 күн бұрын
Thank you. Please support me by subscribing to my free channel.
@soonfattchin6803
@soonfattchin6803 Ай бұрын
Amazing please do contact me
@toolzshed
@toolzshed Ай бұрын
Hi I have a similar model, when I turn the machine on water comes out of the nozzle without pressing the handle button, is my water pressure sensor in the machine damaged?
@CityBoyLiew
@CityBoyLiew Ай бұрын
Is it the same way as shown in the video?
@toolzshed
@toolzshed Ай бұрын
@@CityBoyLiew no it actually comes out from the nozzle end, not leaking from the handle.
@CityBoyLiew
@CityBoyLiew Ай бұрын
@@toolzshed So far I didn’t face that problem.
@toolzshed
@toolzshed Ай бұрын
@@CityBoyLiew I'll open it and check 🤔
@Chris-rb5hx
@Chris-rb5hx Ай бұрын
I recently got my Persona blower installed new and after a few week this exact sound produces, exactly same in the video. The expericienced uncle technician has no clue what is happening. I will show him this video and hope he will realise it's his fault.
@CityBoyLiew
@CityBoyLiew Ай бұрын
Maybe there are some black tape trapped inside.
@abejoeyy
@abejoeyy Ай бұрын
How much cost?
@CityBoyLiew
@CityBoyLiew Ай бұрын
Maybe Rm20.
@abejoeyy
@abejoeyy Ай бұрын
@@CityBoyLiew tq bro
@stephaniedrendel6383
@stephaniedrendel6383 Ай бұрын
Thank you for this! Immediately fixed it! 😊
@CityBoyLiew
@CityBoyLiew Ай бұрын
Yay 😀 well done 👍🏼
@samlee9273
@samlee9273 Ай бұрын
Hello! May I check whether the old RFID sticker, affixed inside the car, cannot reuse upon renewal?
@CityBoyLiew
@CityBoyLiew Ай бұрын
Renewal? It is broken?
@samlee9273
@samlee9273 28 күн бұрын
@@CityBoyLiew No. it is not broken. Just that 5 years is up and required to renew it
@samlee9273
@samlee9273 28 күн бұрын
I renewed it and received another email asking me to upload the document. However, there is no button for me to upload. Haisss!
@CityBoyLiew
@CityBoyLiew 28 күн бұрын
@samlee9273 is that your free version RFID?
@samlee9273
@samlee9273 28 күн бұрын
@@CityBoyLiew I installed it when Malaysia first introduced in 2019 or 2020. Is not a free version. We paid for it
@Watermelonyh
@Watermelonyh Ай бұрын
U helped thanks ❤
@CityBoyLiew
@CityBoyLiew Ай бұрын
Yay 😀
@unrulydroog
@unrulydroog Ай бұрын
Kena nyanyi lagu rain rainnnn go awayyyy bos 🫣
@CityBoyLiew
@CityBoyLiew Ай бұрын
Yes. Luckily it does not rain after all. I do not need to work under the hot Sun. ☀️
@javinashjavinash
@javinashjavinash Ай бұрын
Why hands are shaking💀
@CityBoyLiew
@CityBoyLiew Ай бұрын
Back then went I still can’t afford a camera rig until quite recently bought one. Thanks to all support from my viewers. Should have more stable videos since then.
@melodyqueen8440
@melodyqueen8440 Ай бұрын
#dyecolor
@CityBoyLiew
@CityBoyLiew Ай бұрын
What’s that?
@costinpanait5455
@costinpanait5455 Ай бұрын
Hi. Do you know what thermistor is needed? I have an Electrolux EER75STM 18V. thanks.
@CityBoyLiew
@CityBoyLiew Ай бұрын
I think you need to write in to Electrolux. Alternatively the NTC thermistor looks like any ordinary NTC found online.
@CityBoyLiew
@CityBoyLiew Ай бұрын
It looks like a NTC thermistor. Try write in to Electrolux for certain.
@costinpanait5455
@costinpanait5455 Ай бұрын
@@CityBoyLiew Thank you for the idea. I will try that. Thanks!
@costinpanait5455
@costinpanait5455 Ай бұрын
Hello! What thermistor does this vacuum needs? I have an Electrolux EER75STM 18V. Do you have any idea? thanks.
@CityBoyLiew
@CityBoyLiew Ай бұрын
I will try look it up. But I guess you can refer to the old one and look for the code.
@costinpanait5455
@costinpanait5455 Ай бұрын
@@CityBoyLiew I do not have the old one.
@CoplaLatt
@CoplaLatt Ай бұрын
Broo i love you holy shit thank you actually so much❤❤❤
@CityBoyLiew
@CityBoyLiew Ай бұрын
Subscribe to my channel and consider buying Super Thanks!
@was_g00dy89
@was_g00dy89 Ай бұрын
Why are you breaking it
@CityBoyLiew
@CityBoyLiew Ай бұрын
Thanks for your question! I'm carefully breaking a small section to gently expose more ants. This will help viewers see their fascinating behavior up close without harming the colony itself. Most of the stump remains untouched.
@zacharynicklas2076
@zacharynicklas2076 Ай бұрын
Well, isn’t that the lazy ass way to do it but a cheapskates talk about no service. Sad.
@StefanZKostadinov
@StefanZKostadinov Ай бұрын
repeat after me: Keeeeer heeerrrr
@CityBoyLiew
@CityBoyLiew Ай бұрын
Ok 👌
@navinsilvaimoney8869
@navinsilvaimoney8869 Ай бұрын
Mine when I release the trigger the pump doesn't stop...What could be the problem?
@CityBoyLiew
@CityBoyLiew Ай бұрын
The trigger mechanism must be broken.
@lydsharif
@lydsharif Ай бұрын
Same with panasonic F-M15E6
@CityBoyLiew
@CityBoyLiew Ай бұрын
Correct. Seems like a common issue.
@lydsharif
@lydsharif 17 күн бұрын
@@CityBoyLiew oh ok is a panasonic F-M15E6 so i think.
@CityBoyLiew
@CityBoyLiew 17 күн бұрын
@lydsharif Easy to find spare parts. Easy to fix too.
@nicka2121
@nicka2121 Ай бұрын
You should have taken a grinder tool above the flashing line and made a line 0.5” deep in the cement. Then bend the flashing into the line sticking it in Then caulk the line in the joint. It will never come out or detach from the cement Now your flashing will detach again in a couple of years from heat
@Mkate108
@Mkate108 Ай бұрын
Which model Mac mini did you use?
@CityBoyLiew
@CityBoyLiew Ай бұрын
Target Display mode is not available for newer Mac. Any mode before 2014 and earlier should be fine. Can’t remember which year is my MacMini. You may consider having Luna Display or Duet Display.
@janjan16rjchh
@janjan16rjchh Ай бұрын
Water jet cost
@CityBoyLiew
@CityBoyLiew Ай бұрын
I have been using the water jet for almost five years for various applications. Water jet this days can be really affordable now.
@janjan16rjchh
@janjan16rjchh Ай бұрын
@@CityBoyLiew how much it's and where we can get this
@CityBoyLiew
@CityBoyLiew Ай бұрын
You can try online by typing water jet tool. I’ve been using Bosch Aquatak for many years now.
@johnnyk5543
@johnnyk5543 Ай бұрын
Hi Liew, I've just changed the batteries, put to charge, LED blinks for about 1-2 minutes then off it goes... have you encountered such issue?
@CityBoyLiew
@CityBoyLiew Ай бұрын
I think you have the same issue as shown. Check if you have connected the battery correctly.
@jerryrobert6364
@jerryrobert6364 Ай бұрын
Hii bro... Do you know what spec this fan thermal fuse?
@CityBoyLiew
@CityBoyLiew Ай бұрын
Is there any thermal fuse that you notice in this video?
@khairulezuan8442
@khairulezuan8442 Ай бұрын
Bos..blh taw beli kt mna bttry
@CityBoyLiew
@CityBoyLiew Ай бұрын
Shopee atau Lazada ada.
@khairulezuan8442
@khairulezuan8442 Ай бұрын
Bos beli yg mna..tgk yg da smbung hrga smpai kt rm200
@CityBoyLiew
@CityBoyLiew Ай бұрын
TaoBao sekarang boleh kirim terus ke Malaysia. 【淘宝】m.tb.cn/h.gXAjAp4Ld0ewbti?tk=GB40WGyZvii HU0025 「适用伊莱克斯吸尘器14.4v充电锂电池ZB3102 ZB3104 ZB3105 ZB3107」 点击链接直接打开 或者 淘宝搜索直接打开
@SK-NSW
@SK-NSW Ай бұрын
my machine is leaking for me. Its cooming out on the side. anybody know anything about how to fix this?
@CityBoyLiew
@CityBoyLiew Ай бұрын
Try open up according to the video. Most probably the trigger has cracked.