After replacing the sticks the LT ended up being pressed on. I've tried replacing the sensor, and even with the sensor removed it's still pressed. Do u have any advice or idea?. Could you make a video about this?? Thanks before hand
@redcanfly2 күн бұрын
What is the wire that you used to bridge the pads?
@redcanfly2 күн бұрын
strands from a 22gauge ribbon cable
@reinhardlackner19253 күн бұрын
Hi! I just tried to order with pcbway through your link in the description but I got a message back from them, that the "centoid" file is missing (whatever that is). Any help on than?
@Solder_king3 күн бұрын
@@reinhardlackner1925 I am working with them now to resolve this issue. Please email me and I can let you know when it's fixed :)
@Solder_king2 күн бұрын
Just updated the file set. Please try again :)
@darrengonsalves20994 күн бұрын
What temp do you use to solder?
@Ajelandrox35 күн бұрын
I've had mine broken for a couple years now (because I was too lazy to take it to a repair shop and got another one along the way) but Imma try to do this to finally get it fixed, thanks for the idea!
@funkyflights10 күн бұрын
Can you buy these ?
@callumbal13 күн бұрын
I was planning on doing something very similar with this exact mouse soon, so it's awesome I happened to stumble on this video. This will certainly help a lot, ty!
@sanjapkoki13 күн бұрын
I have an xbox series x that is exactly like this one. How much would you charge to fix it? What is that glue you used instead of solder mask?
@alanalvarado999217 күн бұрын
I need the exact same repair. How much does this repair cost?
@Solder_king17 күн бұрын
@@alanalvarado9992 for this exact board? 45+ shipping :)
@alanalvarado999216 күн бұрын
@@Solder_king how can I contact you
@alanalvarado999216 күн бұрын
How can I contact you?
@AnthonyKeydel17 күн бұрын
Hey cool trackball, what is it?
@marcoricardotapiamelgarejo530018 күн бұрын
2024 you save my controller
@darr297019 күн бұрын
You are very talented. Very interesting videos. 😊
@VideoGameRestoration20 күн бұрын
Beautiful work as usual! I think my iron isn't hot enough after watching this 😂
@SidShakal20 күн бұрын
haven't heard that song in a while i always worry i'm pumping too much heat into things when i do the plate-spinner approach to desoldering.
@thingsweshouldkno21 күн бұрын
Truly the work of a skilled man, bravo🤩
@user-he4sm8lc6s23 күн бұрын
lol i just tried the same thing but made it worst, i lost all traces on the board that connect the pin xD LOL I must have scrape off alot of copper T_T its beyond my repair at this point it needs SOLDERKING!
@user-he4sm8lc6s23 күн бұрын
i have a copy of pokemon blue that would love to see your hands!
@user-he4sm8lc6s23 күн бұрын
May you please upload a step by step tutorial on this! I’m having the same issue but I’m not that smart 😅
@user-he4sm8lc6s23 күн бұрын
Or handy may I say
@user-he4sm8lc6s23 күн бұрын
God Like
@user-he4sm8lc6s23 күн бұрын
Hey SolderKing! I hope this message finds you well, I made a big mistake on repairing a Pokemon Blue copy and broke one of the legs , only realizing there was never a trace there in the beginning hence the solder never jointed on one of the legs, kept messing with it , could I send you some pics for some tips :O ! Reaching out to you because I think youre my only resolution :P
@MrBubbyG_Official26 күн бұрын
I know you said you want to be done, but consider trying to make your videos better instead of stopping. The issue is not youtube, it is your video quality. I know you have been making videos for a long time, but it seems like there are only minor improvements in each video. You need to keep making the videos better, and they need to be made in a way that is entertaining to more people. What that looks like? Only you can find that out. Look around at channels like yours that are larger and take a few notes maybe.
@dooglive92227 күн бұрын
Where can someone pay for your service? I tried changing the clock battery on my authentic Pokemon Sapphire but I think I bridged two pins on the ROM chip with a tweezer by accident and saw an orange spark. Was so upset when I saw that and it dawned on me that I most likely fried the chip... It's weird because I've seen video tutorials where people touch these pins on the chip with a metal tweezer and nothing happens to their game. I have no idea what I did differently to have that happen to mine.
@amonster8mymotherАй бұрын
Im a left handed person who has played right handed for 20 years. I wish 8 could buy a left handed controller. ❤
@pspsmallzАй бұрын
I bought a pokemon red with three broken pins on the right big chip. Excited to learn how to do this one day and hopefully revive it.
@dav22384Ай бұрын
What's your temp on tending/retendin
@WiihelferАй бұрын
Amazing job! This was worth subscribing to your channel. :)
@mayanklakhlani8795Ай бұрын
Just quoted 5 assembled boards on PCBWay. Cannot wait to have them. Sir, you are a boon to humanity!!!
@sojannedosАй бұрын
Also, sad to see you go, any reason why you're leaving youtube?
@Solder_kingАй бұрын
Not just KZfaq but all platforms, I am done putting effort into videos that go nowhere. I have 8k subs here and only 300 views on this video and a few others. Same can be said for TikTok where I have more followers.
@sojannedos28 күн бұрын
@@Solder_kingUnderstandable. You will be missed! I keep going on KZfaq for the memories.
@sojannedosАй бұрын
Good thing you found that old reddit post to help, lol. Great job! This is really cool!
@tfoblaАй бұрын
so sick that the ps2 to usb board fits PERFECTLY in an empty space on the logitech board. great vid. don't quit making videos! we love your stuff!
@Solder_kingАй бұрын
It fits almost too perfectly lol.
@movizationАй бұрын
It is always a pleasure to see Solderking at work, keep it up!
@JscoLPАй бұрын
MOUSE HOUZE!
@palomino11Ай бұрын
Fun conversion. don't stop making videos!
@WolvenSpectreАй бұрын
The common pronounciation is KAIL
@Solder_kingАй бұрын
I will definitely forget that lol
@ShmoopingАй бұрын
Dont be done !!!
@Solder_kingАй бұрын
I wish I could keep going but its defeating
@whompronnieАй бұрын
Great mod~ MAUS HAUS
@fungalcoffeeАй бұрын
Shame to hear you might stop making content, although i get it, its not for everyone and i think i heard every KZfaq content creator i follow talk about it sucking in some way even if they really like doing it.
@Solder_kingАй бұрын
There's just no return after a lot of effort invested. I can't keep hoping a video will tickle the algorithm just right so that it'll maybe show a few thousand of my subs.
@whompronnieАй бұрын
@@Solder_king I will miss you, but I understand completely. Your videos are concise and informative without clickbait titles/a talking head/exaggerated thumbnails, which means KZfaq hates them. I will miss seeing you on Imgur as well. Honestly I wish we could be friends and I could just watch you solder stuff in Discord voice chats, haha.
@acubleyАй бұрын
I've been using Logitech Trackballs since '94. Always wanted that one back in the day.
@Solder_kingАй бұрын
This'll make for a great work mouse. They don't seem too expensive. Never too late :)
@mjc0961Ай бұрын
I have one of these, and yeah the micro USB is crap. As for the switches, I had the plastic that presses on the switch wear out before the actual switches. I was all ready to start soldering and instead I had to epoxy the bottom of the buttons to rebuild the material to press the switch down again