How fast is standard speed and how long did it take to print? I'm looking to get a bambu printer and curious how fast I can print these dragons.
@stephanierigsby4145Күн бұрын
I think the stl file is on thingiverse using the stealthyswiss, but im not positive. It would be mush easier to share a link to those files but it has been a year. The mod itself looks amazing so ill try the file for the stealthyswiss and post back on here
@breakfire97127 күн бұрын
where abouts do you get hardware kits for these blasters in australia? or do you fabricate them yourself?
@Defyant1235 күн бұрын
siddament.com.au/
@breakfire97125 күн бұрын
@@Defyant123 awesome, thanks dude :)
@XYZ-tv7kc9 күн бұрын
Hey, how do I get the Stealthburner running on the Ender? Do I need klipper?
@timoxx417 күн бұрын
What is the dragon head you printed there? Do you have a link for it ?
@HOUSEOFKUDOS22 күн бұрын
The Bambu liquid glue is the best I've used. So good. Expensive, but lasts a long time.
@AlexanderSmith60028 күн бұрын
ATX or SFX power supply?
@genemaster7429 күн бұрын
G'day m8 from Sunny Brisbane. I Backed this way back in September/October last yr and got mine mid December. ive had this running since January 24 on mode 2 and once the relative humidity raises to the 50% on average it will turn on and run till the humidity comes down, and thats done by Silica bags, After the filament has been in the dryer for a day or so the time in between heating runs become longer apart as the heat penitrates deep into a roll and overall the whole roll is moist free. I've been using a TPU i got way back in 2020 nearly full and ive no issues at all, also when your going thru the settings and you come across the flashing Sunlu setting it will change the way the light moves. My 3 main filaments are Esun PLA+ ABS+ and PETG, and with this machine you can run it like a AMS but you manually change ya filament, and because it has 2 filament exits for each roll it doent matter where you put it all my printers will pull the filament just fine, certinely better than my S1 and my original Esun Filament dryer. Big Cheers for an outstanding Review....From A M8 Downunder......p.s. it also frees up many power sockets depending on how many of the earlier dryers you may be running🙃😁
@angieangie21Ай бұрын
what filament is the big butterfly please?
@Malle-io4tgАй бұрын
Love this, yes, just wanna print a plate of shit and go to bed! Hate that temperature fiddling
@bustedbankrolls2746Ай бұрын
This video is shit
@Pinwin42Ай бұрын
I have this same issue on warm days, winter in the north it's fine though Summer hits with no AC and the bottom quarter is randomness.
@elvis0zd497Ай бұрын
Sweet just printing all my plastic parts, I'll check this out. Thanks for the heads up.
@jamesparsons4097Ай бұрын
hi mate, what eva fan shroud is this?
@Defyant123Ай бұрын
The older 2 model
@sniperwolfe0361Ай бұрын
Bruh. Have the same monitor with the same issue and I finally got tired of it and searched around and found this. Cannot for the life of me believe that it worked but it did. LOL thanks
@Ni3wint3rАй бұрын
this video saved me 4 days of downtime
@Am_I_really_not_really_I_AMАй бұрын
Limiting the use of upspeak to inquiries or when trying to convey uncertainty would go a long way as to how well your videos are perceived.
@NiSE_RafterАй бұрын
Where can we find the files for the stealthburner mod? Edit: You also mention printables in the description but I can't find a link to your printables page anywhere
@PlanetJeroenАй бұрын
Brand new one bought 3 days ago had the same issue .. at first I didnt get the grease right and it didnt do much .. pressing the wheel to the other side and making sure a little blob was on the bar and then rocking left and right and then scrolling helped spread the grease to where it needed to be, and now it's perfect. <3
@kosoriclukaАй бұрын
I've actually been experiencing similar issues with my optrix MAG322CQRV but only like bottom 5-10% of the screen. I'll try the heat thingy when I get it again. Would like to know why this happens though. I've had this monitor for like 5+ years and it's getting old but still.
@toshtli2 ай бұрын
I have the same exact problem, I’ll try it and let you know 😜
@grantayson79382 ай бұрын
Hey man thanks for the video I know this is from a long time ago but would you be willing to share your remix of the Headlock shroud that would be suited for the Ender3v2
@3DRoom_DR2 ай бұрын
Where can I find the stl files for this modcase?
@SianaGearz2 ай бұрын
20:33 no no no this is horrible... for all the reasons that you explain just after. For the cold end cooling, i think you're better off slowing down the fan rpm and installing a baffle that would prevent air from leaking from the cold end chamber into the hot end area, than trying to restrict the fan airflow. Maybe a little narrowing in the vague direction of the heatsink is OK, just a little.
@M4RKITOSS__2 ай бұрын
Could you do an assembly tutorial please, I want to do it, it would make me very excited
@M4RKITOSS__2 ай бұрын
Could you do an assembly tutorial please, I want to do it, it would make me very excited
@M4RKITOSS__2 ай бұрын
Could you do an assembly tutorial please, I want to do it, it would make me very excited
@DonnyDonnMendoza2 ай бұрын
Wtf is that thing printed from? That’s awesome!
@Defyant1232 ай бұрын
Thx Donny i thought so too!!!! all from a tiny microwave motor :) Check it out here. kzfaq.info/get/bejne/hbpzZqRel57dh4U.html
@Crazmuss2 ай бұрын
So, what grease should I use? Butter? Vegetable oil? Bacon?
@printbot3dbr3952 ай бұрын
stl free?
@jaymex26172 ай бұрын
This came in 1 go ?
@manuel509rios2 ай бұрын
Are you able to provide the STL for this setup?
@dannoakl2 ай бұрын
Paraloid b72 works great. Better than anything else I’ve tried.
@Houdini.C2 ай бұрын
Dude did you have an issue with the front legs? It's lifting my printer up off of the printed legsx4 using the original rubbers 🧐
@Sohires2 ай бұрын
wtf is this scroll wheel?! I had a trinity before, it was working like a charm. The scroll wheel was loose and fine and I was very happy with it. It's 2024 and I just bought a new one. I'm working as a software developer and I can't even scroll through my code without pushing hard enough for the click to activate, making the experience completely miserable. I tried to move the side panel to my old mouse to double-check it wasn't just the side panel which had died there but unfortunately, that mouse has internal damage, where buttons 5 and 10 are dead so there is nothing I can do. I'm going to have to test that grease method. Ideally, I'd like to just bend the metallic piece forcing the stick against that internal wheel but it'd be game over if I bent it too much.
@DarkRainUK3 ай бұрын
Very useful
@Cereal_Killr3 ай бұрын
Sitting here trying to rid the dreaded cutter stuck warning...I believe it's cause this little piece of junk part. Thanks for your info here
@sybren23 ай бұрын
Had same problem, opened mine and there was a jagged edge on the small metal bar that glides inside the scroll wheel. Removed edge with a metal file and scrolls way smoother now.
@elireyes053 ай бұрын
It is a great modification, where can I get the materials to modify and the stl?
@thetroublecouple3 ай бұрын
Thank you! This is a hidden gem.
@briansmith10983 ай бұрын
Hi, dod you find the desing from min 24:00=?
@nipperdog77773 ай бұрын
That is MEK. And it is very dangerous. It will go right through your skin and get absorbed into your body. It also will make you instantly blind if you get it in your eye, It is also massively flammable. Bit it works great!
@HemRobotics3 ай бұрын
Will it work on 12v system ?
@redline30363 ай бұрын
Is the x axis setup a one off you made its looks really good. The eva carriage is nice looking
@Scottie_703 ай бұрын
do you have the link to the STL for the Veron heat shroud? that will fir over the ender 3 v2 neo??
@security1guy3 ай бұрын
I guess it’s too much to ask him if you could do a video of your upgrade.
@skaterat5244 ай бұрын
Great review mate!
@ltraltier60094 ай бұрын
What did you replace the extruder with for a direct drive?
@mzone43714 ай бұрын
Hello, a fantastic machine, I think the placement of the LCD screen is great. Is there an stl file for it? Or can you please send it to me.