worked like you said.Done and happy.thank you

Only video that helped me fix my problem; thank you!

Thank you so much for the brilliant video. I did exactly as you instructed, and it worked perfectly. I'm so very grateful that I found your video.

Potentially useful note/discovery: I have a desk drawer with a bottom wooden track, similar to the dresser drawer you show in the first section here. However, instead of having a stop at the back of the drawer, there is a little lever at the front of the... drawer hole? The cavity in which the drawer lives. So you need to pull the drawer out most of the way, stick something like a screwdriver or ruler into the gap to hold down the lever, and then pull the drawer the rest of the way out. This can be a two-person job since it's pretty tricky to hold down the lever with sufficient strength WHILE pulling the drawer straight outward.

Why was it so important to replace the valve in 30 seconds? Take your time, get it right.

This video was posted 2 years ago and in 2024 is STILL saving the day. Thank you!!

Thank you!

thanks, method one worked. It didn’t even get messy

I think You might need to seal the overflow pipe before plugging the drain.

My faucet head was just loose. All I needed to be shown was that the faucet head simply twists off... Thanks, no more leak!

love this video!! AHH THANK YOU

Wow thanks this worked!

Great Video... wear goggles at all times because you will get splash-back when plunging everytime. ( eyeball + poopywater = not good )

Helped a lot. Simple and easy. Thank you brother.

I can't thank you enough!!

I did this short cut & it worked! Toilet is no longer running

Getting the old one out is definitely not as easy as this video!

I just received my picture light from Amazon, so this is what I needed to see!

Thank you! I can’t get mine unscrewed though. Is it possible it doesn’t come off? Or how can I loosen it?

Hi Mike. My one light one sensor is green and the other is orange. I don’t see a wire cut from sensor. What next. I cleaned both sensors..

I have a 3 handle shower/tub valve setup and the center diverter valve was leaking. Ended up destroying plastic brittle sleeve inside. Ended up putting center cartridge back in w/ fresh o-rings to seal the leaks and replaced spout with a diverter spout.. all good now. This was an Aqua Source 3 handle bath/shower setup c2007ish from Lowes.

Thank you, sir! My garage door is now closing with no problem .

Excellent video！Very helpful!

We did It! Thank you! It took us longer than 30 seconds, but it was very easy.

It worked… temporarily. the first flush after fixing was fine, but then it started to run really slow again just trickling. Any ideas? Thanks!

Wow! Thank you. My handle is unscrewed. Great video!

You are my HERO!!! Thank you!!

Thank you so much!🙏 Your explanation helped!

Dude Mike thank you so fucking much

Had no idea there was a weight! Whoever set my faucet up (just bought this house) installed the weight upside down, so it fell off. After this video I went back and found the weight in the floor behind a tub I keep down there. Easily fixed and the weight isn't upside down anymore. Much appreciated for the video, boss

THANK YOU! Fixed! I was working on a rusted and leaking pipe going into the house. After the repair and with the water turned back on, the toilet tank took forever to fill up. Turns out that rusted sediments clogged up the fill valve of the tank of the toilet.

THANK YOU SO MUCH!! I don’t need a man. All I need is watching incredibly helpful videos like this one lol!!

So glad I came across this video by accident!. It started playing right after the home depot vid on how to do the full installation. I did exactly what you showed here and I was done in less than a minute! And most of that time was adjusting the water level!. Genius.

Thanks mate! you saved my two toilets!

This is very helpful. Mine doesn't have a screw in the back. I can't get it to budge. I could try to replace the plastic piece, but it's bad, possibly cracked inside like yours.

What kind of screws (anchors) did you use on those brackets against the drywall? Great video and thanks!

I wish I saw your video yesterday bc today I changed a flushmaster and it took me several hrs due to old parts...i guess it prolly was still the right thing to do but for the next repair I'm definitely doing it like this

It's only my hot side and not the aerator?

thats a really nasty shower. guess people who doesnt clean their bathroom get that

Thank you for this. Truly an easy fix, and not worthy of paying the big bucks to remedy! :)

I wanted to say thank you for taking the time and effort to make this informative video. Your instructions plus my using the manual that was for my fireplace made the effort of debugging my fireplace straightforwards. Also, I didn't have to hire a specialist to come out and fix what was a problem that I could fix. In my case, the thermopile had oxidation that collected. A bit of sandpaper and things were back to normal. And, I cleaned the fireplace as well as gently sanded the other probes. Lastly, I did check the voltage as you suggested and I learned how the fireplace actually worked. I had no idea that the heating of the thermopile generated a small amount of electricity. Thanks again for your efforts.

Thanks for sharing! This really works!!!😊

How do I know If I need a 12" or 14"? What am I measuring? The diameter of the tube? Thx!

That was the best way out of all the videos I've learned to replace the Fluidmaster quickly thank you, I must add even the professionals keep telling you and showing you that you have to remove the bottom in order to get the Fluidmaster out they don't even know what they're talking about ,their professionals? Yikes

Great easy to follow instructions. Don’t let your wife see what you use to mix the iron out.

One of the best, most useful videos EVER. Thank you Mike Kilmek!

I'm gonna used a clear glass so you can see what's going on but I'm going to also completely cover it with my hand.

What a disgusting mess clean that place up !!

You’re awesome for this thank you. Just replaced mine using this method. I had the older style fluid master with the chain connected to the flush handle rod, just removed the chain and replaced the old body with the new style fluid master shown in the video. Couldn’t have been easier thanks again bud!

Thank you!