Any new things done to this Tray. would like to see more water videos and use any where or other ppl have videos
@fmann7545Ай бұрын
I plan on running a 2.5 motor . I would like to run a 3, 3.5 but Im concerned about cracking the transom, would this disperse the power enough to run a 3HP ,3.5 Hp?
@innovativesportsman467922 күн бұрын
This mount was made to distribute the weight and power of the Torqeedo 1103 Horsepower motor without causing damage to the transom.
@garryhusketh75682 ай бұрын
Whats the purpose of this plate or you just wanted to come up with something to sell?
@leachboysoutdoors88552 ай бұрын
When we created this plate there was no way to mount a Torqeedo on the stern of a Nucanoe kayak. We solved this issue for our customers.
@warranlench25254 ай бұрын
I am not seeing a rock guard for the 403 Ultralight on your website?? Apparently we CAN use this one on the Newport NK180 with a slight adjustment of the fork.
@innovativesportsman46794 ай бұрын
We no longer manufacture that rock guard. There are new things on the horizon.
@jsspeer04144 ай бұрын
What is the steel wire you used to feed through the kayak? I'm about to start an install of tubing but having trouble finding anything to help me feed through yhe yak.
@innovativesportsman46794 ай бұрын
The wire is brace wire for fencing. You can get it at any farm supply store.
@GalaxyRods6 ай бұрын
I like what you made the plate out of, but not sold on using plastic screws to hold the mount down. I thought Hobie had brass inserts molded into the kayak. I just dont trust screws in plastic. There's lots of torque on that plate.
@innovativesportsman46796 ай бұрын
The Hobie Pro Angler kayaks before 2020 had brass inserts. After that they went to plastic screws. The torque is mostly on the H-Bar Clamps. We’ve never had an issue with the screws.
@JohnB-ep3pg7 ай бұрын
are those clamps you use available online anywhere? Also how thick of aluminum is that?
@innovativesportsman46797 ай бұрын
The clamps are not available anywhere. We make those for our plates. The plate is 1/4” aluminum.
@JohnB-ep3pg7 ай бұрын
Will setting up the power poles like this keep you locked into position where the nose of the hobie wont move at all?
@innovativesportsman46797 ай бұрын
In theory yes but only to the capability of the Micro Power Pole Anchors. A lot of things play a factor in this like wind, current and the bottom substrate of the body of water.
@JohnB-ep3pg7 ай бұрын
@@innovativesportsman4679 okay thank you, I wonder if you could develop something where they could be on either side directly behind the chair. That would probably help since they are farther a part and also they are more towards the middle of the boat which would also help, and also better just in case you need access to them. Thank you for your response 🙏
@innovativesportsman46797 ай бұрын
@@JohnB-ep3pg I believe for most people that would be in the way of their cast.
@smokeytheangler83877 ай бұрын
Will this fit the Newport NK 300?
@innovativesportsman46797 ай бұрын
Unfortunately, this will not fit any Newport motors
@maasam2111 ай бұрын
Thank you sharing this video. I like this video.
@Alibitattoo Жыл бұрын
Couple questions? Where are you located? How can I get ahold of you to add trolling motors to a couple kayaks? Thanks Barry
@innovativesportsman4679 Жыл бұрын
We are located in Mount Airy, MD. Easiest way to get ahold of me is [email protected]
@kayakingwithkevin303 Жыл бұрын
Wish i seen this before i installed helix drive on my recon. Tube was hardest part, but this way looks much better. Where do you get tubing and spectra cord from? Wilderness doesn't show it on their website. Thanks!
@innovativesportsman4679 Жыл бұрын
We sell the cord and tubing on our website innovativesprtsman.com
@thebountyfishermen5359 Жыл бұрын
I wonder if this will fit the newport NK300 motor 🤔
@innovativesportsman4679 Жыл бұрын
We have no experience with the NK 300 so unfortunately we cannot answer your question.
@thebountyfishermen5359 Жыл бұрын
@Innovative Sportsman Thanks for replying I ordered it so whenever it comes in i hope it works... Fingers 🤞
@rjstargel730811 ай бұрын
@@thebountyfishermen5359did it fit?
@thebountyfishermen535911 ай бұрын
@@rjstargel7308 Yes, it did, the weed blade has set back a little bit, but no problem.
@dukebuck Жыл бұрын
Very nice design, I like this better than the One Objective design
@innovativesportsman4679 Жыл бұрын
Thanks Sam One Objective makes good products we just offer something a little different using aluminum.
@jeremyhicksfishing Жыл бұрын
Can yal make a Nucanoe Unlimited adapter plate with 2 spots one for motor and one for a power pole????
@innovativesportsman4679 Жыл бұрын
Unfortunately we have no plans of developing a plate for the Nucanoe Unlimited to hold a motor and a power pole at the same time. Thank you for your interest in our products.
@Mdkayakangler Жыл бұрын
I can’t wait to see you fully Rig a Jackson Knarr
@agentwynnoutdoors Жыл бұрын
I'm still trying to figure out how you install the Power Pole with that adapter plate.
@innovativesportsman4679 Жыл бұрын
What part are you trying to figure out? The power pole will bolt right to the plate.
@agentwynnoutdoors Жыл бұрын
@@innovativesportsman4679 Okay got it. I use mine with the clamps but I forgot about the other way. Thanks!
@juancanon1459 Жыл бұрын
Do you have any videos of the lite tackle being rigged for a foot controlled torqueedo
@innovativesportsman4679 Жыл бұрын
I do not but you have to get real creative to get the tubing through the hull. It is possible we have done a few.
@HAL-zh1kf2 жыл бұрын
Where does the steering locking pin go? My 1103 AC installation requires the steering triangle to be locked in place. This is a far better triangle than Torqeedo's and I'd like to buy one, but I need the locking pin.
@innovativesportsman46792 жыл бұрын
Thank you for your question. We made this product to be used to steer the kayak not to lock it in place. We will be making a steering lock later this year for the Torqeedo Ultralight motors. Stay tuned.
@HAL-zh1kf2 жыл бұрын
@@innovativesportsman4679 Thank you. I will place an order as soon as it's available. One of the biggest problems with the Torqeedo triangle is that the locking pin can ultimately fracture the plastic and then the motor can no longer be used on installations where it must remain locked. This can be a major issue. I look forward to a solution.
@AllanSitte2 жыл бұрын
Got mine. Installed it. Can't wait to see how well it handles the lake salad. Thank you for all you do. Be safe and be well.
@georgefitzhugh64552 жыл бұрын
Very nice! Thanks for sharing.
@georgefitzhugh64552 жыл бұрын
Thanks for sharing
@johnwhite9932 жыл бұрын
Enjoy your videos. Do you have any stickers for your business? Would love to have some if you do.
There are many differecnces. The main difference is that this mount is made of 5052 aircraft aluminum that has an exceptional resistance to sea water. That paired with the powder coated finish makes it very corrosion resistant and less bulky than plastic mounts. All of the holes are tapped so there is less hardware and it is easier to install.
@loneridermj2 жыл бұрын
I like this idea better than using the screw to expand the end as shown in other videos. You also had a special tool you made to mushroom the ends. I liked that better. I just wished this method came out before I installed my tubing. I used the screw method. It was a challenge expanding the end of the tubing enough to have enough tubing to mushroom. Thanks for sharing. I would have definitely used this method. Best so far. Thanks
@innovativesportsman46792 жыл бұрын
Thanks! We made this video because we felt that a lot of people could benefit from it.
@clavicus2 жыл бұрын
I will never have this kayak or do this but this is cool :)
@innovativesportsman46792 жыл бұрын
Thanks! The this can be done with any kayak. We get asked all of the time how we do it so I figured a video would help show the little tricks that we use.
@elvisrickey46252 жыл бұрын
Really liked the idea of your front anchor. I used the 1/4-20 eyelet and there seemed to be quite a bit of resistance. Put a carabiner in the eyelet and attached a small pulley to the carabiner. Really worked well and no friction. I don't know if you are still answering questions or not but was that bow fishing line you used instead of cable on the foot control? Thanks. Some great ideas. Thanks.
@innovativesportsman46792 жыл бұрын
The line we use is called spectra cord. We get it by the 1000 yd spool. We sell it in our online store @ innovativesportsman.com.
@XxsteamerxX2 жыл бұрын
details on the scupper transducer mount please? i just picked up one of these yaks and I need a solution for that.
@innovativesportsman46792 жыл бұрын
That is a custom piece we made of delrin. You can get it in different sizes on Amazon. We made it so it would fit snug in the scupper and the cover on top pulls it up to keep it tight or the boat.
@zero-ol2nt2 жыл бұрын
Would this work with a Bixby mount?
@innovativesportsman46792 жыл бұрын
I am not familiar with the bixpy mount
@CrazyCranker2 жыл бұрын
Is this guard combatable with the Kayak Motor NK180?
@innovativesportsman46792 жыл бұрын
It is not compatible with the NK180. We have not developed that one yet.
@jason_ryan_fishing5 ай бұрын
@@innovativesportsman4679 you have something in the works for the NK180 yet?
@zolopo2 жыл бұрын
What will be the additional mount for the trolling motor?
@innovativesportsman46792 жыл бұрын
There is no aditional mount for a trolling motor. This mount simply puts the "4 bolt pattern on the back of the kayak for a Torqeedo motor, Micro Power Pole or a Newport Vessels NK180 motor.
@zolopo2 жыл бұрын
@@innovativesportsman4679 Does it work on the CK1 Venture?
@innovativesportsman46792 жыл бұрын
@@zolopo Yes It does.
@elvisrickey46252 жыл бұрын
A motor and pedal drive.....interesting.
@mcveyfamily12703 жыл бұрын
I had a simular incident that happened to me several years ago on a KBF torment on the Mississippi River.
@JakeHarshman3 жыл бұрын
great video sir! I greatly benefitted from it for sure!
@reyesrolando19643 жыл бұрын
Why don’t y’all make up mountain plate for the torqeedo and a power pole on outback kayak
@innovativesportsman46793 жыл бұрын
We do it’s called the Rugged In-Line Gen3. They will be back in stock by next week.
What's the diameter of that hole for your guard to insert the torqeedo shaft?
@innovativesportsman46793 жыл бұрын
30mm
@innovativesportsman46793 жыл бұрын
Thank you sir!
@JakeHarshman3 жыл бұрын
Looks badass!
@floofforever1233 жыл бұрын
thanks for the video. Do you think that a similar set up with a Torqeedo 1003 might work for a Hobie quest 11? (I have both so I am wondering if it worth the try or it is an overkill and will render uncontrollable)
@innovativesportsman46793 жыл бұрын
The 1003 is still a lightweight motor. It should work for your setup. You will have to get creative with setting up the mount.
@yakin_n_bassin82033 жыл бұрын
Any videos of it in action? It ll really help with my decision making... or maybe some reviews
@innovativesportsman46793 жыл бұрын
Not at this time.
@mikeeygendaal3 жыл бұрын
I need this!!! When will they be available on the site?
@innovativesportsman46793 жыл бұрын
They are available now.
@dereksmith79653 жыл бұрын
So the 1003 pylon fits in the 403 AC mount? Thank you
@innovativesportsman46793 жыл бұрын
Yes it does.
@jase87934 жыл бұрын
Awesome product !! Thanks for designing it & producing an install video mate !!
@betoguzman98674 жыл бұрын
Great product I just ordered my 1103 AC from y’all 2 days I can’t wait to get it and install it. Thanks guys for the info Beto G./la Marque TX
@innovativesportsman46794 жыл бұрын
Thank You for your business.
@Emilestafanous4 жыл бұрын
Hi Beto, I am considering buying the Torqueedo 1103 for my Hobie Mirage 14 (2014) how do you like it? was it easy to install?
@ScottBeutjerFishing4 жыл бұрын
Looks great, can’t wait to get mine!!!
@innovativesportsman46794 жыл бұрын
Thanks Scott!
@TheAclements5 жыл бұрын
What is the size of the wrench to install the rock guard? I don't have a wrench that will fit it.
@innovativesportsman46794 жыл бұрын
Sorry for the delayed response. It’s a 3/16 Allen wrench.
@YakNZakFishing5 жыл бұрын
One more thing I need to order! Thank you!
@umienh9165 жыл бұрын
Can I use it on the bixpy?
@innovativesportsman46795 жыл бұрын
Leo Saechao I don’t no anything about Bixpy. Our website is innovativesportsman.com
@umienh9165 жыл бұрын
@@innovativesportsman4679 ok, does the 50% coupon if I buy two torqeedo 403?