Жыл бұрын
Пікірлер
@sdrawkcab_ssa 3 күн бұрын
I put a little bit in the little bottle. Every time I turned it over to us it, it would come out the tip without me squeezing it. I would get big puddles on the acrylic. When I get home, I'll have to try your technique.
Ай бұрын
What is the gauge of the needle in your applicator bottle? Is there a best or recommended gauge needle to go with?
@johnmccarthy2545 Ай бұрын
this was very helpful to a new Seller, thank you!
@YouTubeGoody 2 ай бұрын
I don't understand why you factor in your profit as a multiple of your materials. What about custom projects where the customer provides the materials? Even if only doing retail, this strategy doesn't make sense to me. Otherwise, this is an ok starting point and gives a few things to consider for local and online startups.
@TheLaserCollective 2 ай бұрын
You always want to make back what you spent on supplies by at least X 3 so you can invest back in your supplies and still pay yourself. You can add in other expenses as stated (cost of overhead, etc.) and then charge at least a minimum hourly wage for yoru time (you set your own hourly rate as high as you want). As far as letting people provide you with materials you should determine what you want to charge for your time. This video isn't for that type of work. I don't let customer send me product as the risk for me isn't worth messing up their product.
@snafusofauq8297 3 ай бұрын
Why are you trying to tell people to devalue themselves by only charging minimum wage?
@robertketch8508 2 ай бұрын
Exactly what I thought. If I wanted to work for minimum wage I would do it for no risk and paid holidays.
@TheLaserCollective 2 ай бұрын
That is a minimum to charge. That should be obvious. You should be at LEAST charging your time at this amount. You can charge more. But most do NOT even factor in their time at all. They charge for supplies and that is it. Use some common sense!
@readingcraze7283 4 ай бұрын
How long it take to properly weld ? Few minutes?
@rodeomomkm 4 ай бұрын
Thank you so much for the breakdown! This was a great help!
@rykus2010 4 ай бұрын
So you are working for less than minimum wage?? I was pushing $60/hour. oops
@TheLaserCollective 2 ай бұрын
That is a minimum to charge. That should be obvious. You should be at LEAST charging your time at this amount. You can charge more. But most do NOT even factor in their time at all. They charge for supplies and that is it.
@sharedsmilesbydm1312 4 ай бұрын
Does this work with mirror acrylic?
@jeheaton2012 5 ай бұрын
Where can I get the file for the paint pen storage rack? 🙏
@BreeZieDoesiT 5 ай бұрын
Does weldon 3 evaporate less due to the extra viscocity and would you recommend 3 by any chance?
@hannahtaylor6659 6 ай бұрын
amazing video! how did you seal prior to painting?
@itstrac3 6 ай бұрын
Aaaand now I know why my stuff wasn’t sticking 😂 thank you!
@vitale6633 6 ай бұрын
Very Helpful. Thanks for taking the time to share.
@deedeemac 7 ай бұрын
🥰🇨🇦 great information! Thank you!
@user-ii5ww6nq6z 7 ай бұрын
In the video you mention a polish to clean up any excess.. what do you use? I couldn’t find it linked or in your Amazon store. Thank you!
@TheLaserCollective 7 ай бұрын
I'm not sure, can you give me the minute mark? The only thing I can think of is this: www.custommadebetter.com/search?q=polish&options%5Bprefix%5D=last - the novus polish stuff. But I haven't used it for this. If it goes everywhere I don't know how easy that would be to fix as it melts the acrylic. This is why if I accidentally drop a drop on there, I just try and let it evaporate and not touch it or move it around while it does evaporate.
@user-ii5ww6nq6z 7 ай бұрын
Thank you! It was at 4:53. You mention nova something so this is helpful! My bottle of Weldon didn’t come with an applicator so I ordered some on Amazon, but I was having trouble keeping it in the needle without it dripping out.. I will try the nova stuff linked up here!
@jah5686 7 ай бұрын
Great info. Quick question, if I laser (engrave or fill) on ceramic can I use these pens for that and will the paint last a wash i.e. a ceramic coffee mug?
@TheLaserCollective 7 ай бұрын
I've never tried. But these are acrylic, so I think you could use anything really as long as you sealed it. It would be worth trying!
@jah5686 7 ай бұрын
thank you, I'll give it a try. Is there a sealer you recommend?@@TheLaserCollective
@kimneurenberg5013 7 ай бұрын
I seal before I laser in order to remove soot easier. R u sealing again after that or just the one time after lasering? Because my acrylic paint is not adhering.
@cecyaguilar5767 8 ай бұрын
Thank you for this!! I was trying to figure this out myself with not going over or under. This was soooo helpful! ❤
@shaunmurray2322 8 ай бұрын
Fantastic idea. Well done!
@VictorsUNSHINE 8 ай бұрын
Can i purchaes the files? Can't seem to find them on the site...
@hbcountry495 8 ай бұрын
Super cute! Where do you find your mdf? What is the thickness of it?
@pamelax5 8 ай бұрын
Love this, and I love the hanger "thingy", did you make that or purchase? I'm looking for an idea for a small centerpiece. Thank you!😃
@TheLaserCollective 8 ай бұрын
Hi! I think I got it from Amazon! :) Look up Ornament Display.
@pamelax5 8 ай бұрын
@@TheLaserCollective thank you! I totally found it. Happy Holidays!🌲
@sravanivaddi209 8 ай бұрын
Hi, Im a designer, i have a client who gets customised orders of laser cut products , I design those orders on system and send the file to the laser cutting person, so how much should i charge that client
@QuotidianStupidity 9 ай бұрын
Great
@emmanuelkwadwofosu1097 9 ай бұрын
Awesome!!!keep up teaching us
@brandonbaird4499 9 ай бұрын
My tip so it won't dry out is to put a little hole on the top instead of cutting the top open so it won't dry out that is my helpful tip God bless everyone 🙏❤️
@mr.mrs.t.9292 9 ай бұрын
Cool share, thank you!
@amortocreatecrafts 9 ай бұрын
In love with this new feature fron AI, and it is also available with @adobeexpress
@dawnflach8460 9 ай бұрын
Have you tried super glue with acrylic?
@renebutler2972 9 ай бұрын
It doesn’t work and leaves a film
@TheLaserCollective 9 ай бұрын
It definitely leaves residue!
@dawnflach8460 9 ай бұрын
Do you get any feathering like with super glue?
@TheLaserCollective 9 ай бұрын
Nope!
@edwardpataroque5450 10 ай бұрын
Thats awesome! What kind of paint did you use?
@Doomsday-nw4my 10 ай бұрын
The only mistake here is that you should never let that Tim can stay open like that when doing this. You pour what you need and close that can coz this shyt evaporates like crazy
@TheLaserCollective 9 ай бұрын
I'm working SUPER fast usually...doesn't have time to evaporate when Im' using it.
@CreatureCribs 6 ай бұрын
I put mine in an air tight food container. Never evaporates. Your welcome 😊
@catechops1970 10 ай бұрын
Have you used Weldon 4 to adhere Clear Acrylic to Clear Acrylic? I am looking for a completely transparent adhesive to adhere a clear acrylic piece on top of a dark colored backer piece.
@TheLaserCollective 9 ай бұрын
Yes. I didn't have an issue doing that - but I didn't do a huge layer.
@crashgtr 11 ай бұрын
Thanks for making this video. Where do you find the 3m sheets for $1?
@ianedwards1293 11 ай бұрын
I think I read somewhere that the bonding agent you are using is extremely toxic and one should use protective gear when using including a respirator. What are your thoughts
@dangerhotrod6941 10 ай бұрын
I have read a bunch about how toxic it is too (carcinogenic), I would wear nitrile gloves, clothing covering your body and a full face respirator, and work in a well ventilated area - especially if you are exposed to it frequently.
@TheLaserCollective 9 ай бұрын
I'm not too worried, I don't use it a ton. but you should use PPE how you see fit best for you!
@marisafatzer3966 11 ай бұрын
How does this work if the top layer is a little translucent?
@TheLaserCollective 9 ай бұрын
Should weld!
@snurrfilm1 11 ай бұрын
What do you seal it with after painting?
@sriv760 11 ай бұрын
Cleaning applicator? Suggestions?
@TheLaserCollective 9 ай бұрын
I usually just buy a new one!
@diamond6256 11 ай бұрын
Thank you, great video.
@matthewyule2064 11 ай бұрын
I am looking for a replacement applicator I order one and the needle was way to big. anyone have a link for a replacement
@TheLaserCollective 9 ай бұрын
Hmm, I usually use the new one that comes with my bottle every time. I haven't bought them separate. Have you tried a syringe type needle bottle?
@susanaortiz5289 Жыл бұрын
I want to try that trend too! But I can’t find anyone using an xtool machine or the xtool design space for the settings 😢 I’m new at this and I’m totally lost with the settings for those 😅
@onsapplikasies8620 Жыл бұрын
Nice idea regarding masking. Thanks for the video.
@teardrops7841 Жыл бұрын
Great way to size items! Thank you
@MTRogers713 Жыл бұрын
I love those ornaments. Any chance of getting those files so I can make those?
@carmygraph Жыл бұрын
Hi, what kind of wood did you use? Would have loved to see how you cut the letters
@OhioJimbo Жыл бұрын
Would you share that spreadsheet?😊
@colleenhinrichsen9154 Жыл бұрын
You are a rockstar! This was SO helpful. I was overwhelmed and had no idea what I needed or how to begin before watching. Your process makes me excited to try this! One question: Can you reuse the applicator bottle for the next project, or should I think of them as disposable when ordering?
@TheLaserCollective 9 ай бұрын
Happy to help!
@4bohobabes Жыл бұрын
Thank you! Very Helpful. Where did you get your pen organizer?! I love it and really need something to organize all my acrylic pens. :)
@TheLaserCollective 9 ай бұрын
It's a file we sell at etsy.com/shop/thelasercollective
@karenhadden4980 Жыл бұрын
Is this simple enuf for AI BEGINNERS ?
@TheLaserCollective Жыл бұрын
I think so. But we offer a free intro course to help you learn the interface of AI as well, on our site!