2 жыл бұрын
2 жыл бұрын
2 жыл бұрын
2 жыл бұрын
2 жыл бұрын
2 жыл бұрын
2 жыл бұрын
2 жыл бұрын
2 жыл бұрын
2 жыл бұрын
2 жыл бұрын
2 жыл бұрын
2 жыл бұрын
2 жыл бұрын
2 жыл бұрын
2 жыл бұрын
2 жыл бұрын
2 жыл бұрын
2 жыл бұрын
2 жыл бұрын
2 жыл бұрын
2 жыл бұрын
2 жыл бұрын
Пікірлер
@nineinchnails7213 3 ай бұрын
This controller doesn't appear to have a fan. When you run a 240V heating element the SSR gets REALLY HOT. A fan should always be used to keep remove heat from the heatsink unless you're using a really large external heatsink. A 12v fan is more convenient. I'd expect the SSR to fail prematurely if a fan is not used.
@SkyfallBrews_India 3 ай бұрын
How did it turn out?
@andrevangijsel957 4 ай бұрын
what is the advantage on measuring temp at the mashtun outlet vs herms coilc outlet? I see you measure at the mashtun outlet what is your reason to do this?
@Brausupply 4 ай бұрын
Measurement at the mash tun outlet is telling you the temperature the wort actually reached on its way down through the grain bed. Measurement at the herms coil outlet tells you what temperature of wort you're putting back on top (the wort temperature that hasn't reached the grains yet). I suppose there isn't a 'wrong' way to do it, if you know your system you'll know the differential of the two of these. BUT, the output temperature of the wort leaving the HERMS coil outlet, will be close to the HLT temperature, and therefore it's not as informative as the temperature leaving the mash tun. in other words the differential is greater measuring at the HLT tank, and the outlet of the mash tun, giving you better information to adjust your HLT temperature with. Does that make sense?
@MAR108 5 ай бұрын
This system looks like it had allot and I really do mean allot of thought, put to it, way to eliminate one tier out of a three tier system, and a great utilization of the jacketed fermenter. Obviously great for a home brewer and a micro brewer. Cheers 🎉
@wadekummer 6 ай бұрын
Thanks for this video
@wadekummer 8 ай бұрын
I have your kettle and controller. Thanks for the video
@JohnFrytag 10 ай бұрын
Where are they made?
@shaungrant8008 10 ай бұрын
Have you determined an approximate evaporation rate using the condenser? I did a 60 minute vigorous boil today and only lost 1/4 of a gallon. I'm trying to nail the evaporation rate so my SG isn't too low. 🙂
@aphexpin 11 ай бұрын
It’d be nice if the bag came with a cinch/bungee sewn in at the height of the whirlpool port, so one could but the bag inside the basket and still recirculate without getting the basket dirty or risk scorching the bag. This would also make removal of the bag/grain smoother. I like the metal basket (it’s largely the reason I chose this system) because it sits on the top of the kettle to make fly sparging possible and has the tri-clamp port for recirculation, and it’s solid walled. But having the bag work a little better with it would be great.
@TheHalfDemon Жыл бұрын
This looks like an Inkbird rebrand for 70 bucks more... My original brau temp controller crapped out, so now I have to replace it.
@TheHalfDemon Жыл бұрын
My ETC controller crapped out, so now I'm going to have to replace it. I'm going to get the INKBIRD PID to replace it, why are you guys up charging like 70 bucks for the same controller that inkbird is selling? Looks identical to your SV1...
@dennispirkl671 Жыл бұрын
can you share where you place the prob for the mash setup and where the heat element is placed?
@America-cw4fq Жыл бұрын
This think looks awesome
@EMS_Brewing Жыл бұрын
I dont understand this sparge arm set up… why not have your ball valve connection stay the same and just put a hose with a female QD inside during the Mash?? Like why make a huge mess disconnecting all the TCs when you are going to put in a QD??? Am I missing something?
@smok3633 Жыл бұрын
Long story short, I just did a batch without chilling. I just poured it I to my SS fermenter and put it in my fermentation chamber. It took like 12 hours for the temp to come down for pitching. I wonder how it's going to turn out 😬
@zzing Жыл бұрын
Isn’t this just the Inkbird IPB-16S rebranded? It is a good controller.
@captaininsano564 Жыл бұрын
Ok so I've been researching for the past 6 months wither I would buy this unit or the Spike 20 gallon. Both appear to be top notch units... But the same pattern prevails with the unibrau and that would be timely customer service/response times. Alot of reviews I've seen or read all said that it takes a while for the owner/inventor to eventually get back with the customer. For this price range it is completely unacceptable to me for this to even happen. It just makes me side with the competition as a consumer more than anything else.
@johnpumphrey7655 Жыл бұрын
I own two of the, four port, 10g kettles. They are tanks. Beautifully designed and made.
@captaininsano564 Жыл бұрын
Why use a cloth bag when you designed the perfect metal one. Isn’t this the whole reason for a all in one BIAB systems, aren’t you going backwards. I might as well continue with my one vessel BIAB pot and save a crap load on $$$… Just saying, if you’re confident in your design why go backwards… I really like your systems and was saving up for one , but come on…completely on the fence now…
@carboncitybrewer1823 Жыл бұрын
I got this bad boy a week or so ago. I'm trying figure out how to use it. Is there a video of you using it? Can you control the pump speed? I have so many questions, What is the difference between PID and switching mode?
@danielschweighardt3543 Жыл бұрын
This was incredibly helpful, thanks for putting it out there!
@cainbro4705 Жыл бұрын
Are we on version 3 now?
@kiennguyentrung8396 Жыл бұрын
What is brandname of fermenter?
@micahbowen184 2 жыл бұрын
Does the 120v upgrade kit come with a gfci cord?
@silveraven1 2 жыл бұрын
I might’ve missed this but are both units insulated?
@silveraven1 2 жыл бұрын
I went on your website and it indicates they are sold out but they don’t list a price?
@smok3633 2 жыл бұрын
Will the SV 240 work with the EZ Boil? I currently have a 120V system.
@JohnnyReverse 2 жыл бұрын
does hop utilization differ from filter to kettle?
@amarkert 2 жыл бұрын
Is this the monster mill 3, MM3? I couldn't find it on your website.
@tagrifleworks 2 жыл бұрын
Hi Steven, I've been brewing on a Unibrau for a couple of years now, always all-grain. However, I've always purchased pre-milled grains. This looks like the way to go on milling your own.
@dezput 2 жыл бұрын
This is what I have been waiting for!! Would love to see some more brew day videos and tastings aswell
@TismFishing 2 жыл бұрын
I would love to see a video of the 10 gallon system being used with an induction burner to see how times pick up. Great video, I think the system y’all make is excellent, good job.
@doertedev 2 жыл бұрын
Do you ship to Germany?
@doertedev 2 жыл бұрын
@@Brausupply ah sold out. Dammit.
@billmcdonald2436 2 жыл бұрын
Nice set up!
@ItsReck1 2 жыл бұрын
How often do you change out the filter? Do you use other clearing agents after filtering?
@vencentgalvan8684 2 жыл бұрын
How do you use the probe? Do you place it directly in the mash/boil?
@mikechickenman 2 жыл бұрын
Where are you selling this controller?
@foleyu2 2 жыл бұрын
Great piece of kit. Is it possible to buy the grain basket and the kettle adapted to sit it on, stand alone ?
@johnpumphrey7655 2 жыл бұрын
Thank you, Steven. I love the video content coming out lately. Keep up the great work! Would you recommend using both the Drop In Hop Filter AND the Hop Block and Dip Tube option?
@mikechickenman 2 жыл бұрын
I wire-tied my one of these to a wire shelf, and it makes it really easy to use. It’s great for CIP.
@DorriWilliams 2 жыл бұрын
With the bag outside the malt pipe, you cannot use a finer grain crush because the screen at the bottom of the malt pipe will still clog.
@tagrifleworks 2 жыл бұрын
I dream of this fermenter every night!
@tagrifleworks 2 жыл бұрын
Hi Steven, this is the controller I chose for my UniBrau system. I love how easy it is to use and I love the tactile feedback from the knob (everything is a touchscreen these days)
@tagrifleworks 2 жыл бұрын
Very comprehensive Steven! This looks like a very versatile controller.
@tagrifleworks 2 жыл бұрын
Wow Steven! This looks great! I’ve been using a cheap hop screen in my Unibrau for a while now but not satisfied with the performance. I would love to give this a try!! Made a video on your Hopblock and love it as well!
@mikechickenman 2 жыл бұрын
This thing is outstanding. The ring seal is a little tricky, but once you get used to it it’s a game changer.
@johnnys5262 2 жыл бұрын
Just curious - why not place the temp sensor on a T before the pump (instead of after the pump)? I would imagine that would be a better place in the even that you don't want to run the pump but you still need to know the temperature.
@alfyr.e.meyerakaa.r.e.m.4434 2 жыл бұрын
In my books, I had the main characters turn to making their own liquor - moonshine - for fuel, medicinal purposes, as well as trade and consumption...so I bought a still for research. My books characters also made beer, so I'm researching systems. It can't be too difficult or impractical in their peculiar setting so I hope you produce a video to convince me for such an investment.
@alfyr.e.meyerakaa.r.e.m.4434 2 жыл бұрын
It would be nice to see a series of videos - out of the box assembly, acquisition of ingredients, preparation for brewing, actual brewing process, and finally bottling and sampling.
@marcdabros9660 2 жыл бұрын
Thanks Steven! Keep the videos coming. I picked up the premium Unibrau system and find these videos on the component parts very helpful. I haven’t used the whirlpool kit yet, but am planning to brew a NEIPA next weekend will give it a go!