Great job... mine annoys the hell out of me, too Thanks
@erik745214 күн бұрын
At first I thought its gonna be a bed frame for Al Bundy's mother in law - extra sturdy... LOL 😂 Or, a large flower box to make the wife happy... Sorry, but couldn't resist... we have to laugh sometimes in this cracy world... It can serv multiple purposes dought.. and thats nice - good work ! 🥰👍👍👍
@GeorgeEI7KO3 күн бұрын
Makes it all the easier to live in doesn't it?
@ettoredalfarra221 күн бұрын
I have got an AR7 from a garage sale a short ago. It worked quite well and it was very precise in frequency, but it needed a good cleaning and an electrolytics recap. After recapping I did the cleaning of the solderings side with alcohol and toothbrush, and after that an audio issue arose: the audio came and went away simply touching some components in the circuit, including touching the trimmer pots. At last, I redid the solderings around TR15 (D471) that feeds the channel display and all was fixed. That transistor becomes very warm and perhaps the repeated temperature variations in time had damaged some solderings. Very nice little rig, unfortunately not legal for use in Italy.
@billybiker138321 күн бұрын
Looking good there mate, I must admit I do miss the in-depth videos you used to do but totally understand that time is a factor and that this isn’t your main job…just thought I would let you know that they are appreciated and that I look forward to seeing these vids
@GeorgeEI7KO21 күн бұрын
Cheers Bill. I'm sorry mate, I just don't have time for that at the moment. One shot deal unedited and upload straight from the phone for now I'm afraid.
@billybiker138321 күн бұрын
@@GeorgeEI7KO totally understand mate
@stevetaylor844621 күн бұрын
Lovely looking radios George
@delstephens744122 күн бұрын
Nice rig George …got a nice home for it here lol ❤
@electromech733526 күн бұрын
What's that motor boat sound coming from the radio? A switch mode power supply?
@GeorgeEI7KO26 күн бұрын
PLC noise. I get it all the time here. The downside of an Urban QTH
@billybiker138327 күн бұрын
Looking grand there fella… another cracking job done.
@GeorgeEI7KO27 күн бұрын
Cheers Bill. Hope you are well fella.
@ghanditw28 күн бұрын
have a good weekend m8
@GeorgeEI7KO27 күн бұрын
Hi Mike. Hope you are in good fettle. I will WhatsApp you.
@ghanditw27 күн бұрын
@@GeorgeEI7KO im good m8 just bored
@fulltruckereffect28 күн бұрын
🎙️🎙️🎙️
@GeorgeEI7KO27 күн бұрын
Thanks man.
@qmanus21Ай бұрын
Thank you so much
@GeorgeEI7KOАй бұрын
Good luck!
@notcharlesАй бұрын
Would have appreciated a with antenna/without antenna comparison at three or four places on the dial. As it is, we can't tell if there was any improvement.
@GeorgeEI7KOАй бұрын
Take my word for it, massive improvement. Didn't think of doing that at the time of the video. Sorry.
@digitalwerkerАй бұрын
I keep referring to this video because my father keeps messing with my settings!!! Thank you!!
@GeorgeEI7KOАй бұрын
Happy to help!
@M7XCBАй бұрын
Ive got couple off this set they are nice looking works well i don't like the inside. It just sitting on the shelf for 3 years now i definitely won't recommend it to anyone .
@GeorgeEI7KOАй бұрын
If you ever want to part with one let me know.
@M7XCBАй бұрын
Will do
@eazystreet5507Ай бұрын
I don't work on radios now that I'm retired but in the past when I've had a problem like that I build a new circuit board back to a usable connection.
@stevej8141Ай бұрын
George.... Are you in the states?
@GeorgeEI7KOАй бұрын
No I'm in ireland.
@stevej8141Ай бұрын
@@GeorgeEI7KO crap
@GeorgeEI7KOАй бұрын
@@stevej8141 I don't follow?
@stevej8141Ай бұрын
@@GeorgeEI7KO I was hoping you was in the states that way I could send you my cobra 200.
@CBRadioWayBack10-4Ай бұрын
utter crap and we all know it..
@GeorgeEI7KOАй бұрын
The first and second iterations of the are total garbage. The v3 of them are OK. If you have the test equipment and spend the time setting them up, they're not too bad. Channel selectors are very delicate in them though. The selector or a cpu fault are normally what writes them off.
@billybiker1383Ай бұрын
A beautiful radio there mate, mine is still bang on and working well.
@GeorgeEI7KOАй бұрын
Glad to hear it bill.
@randydunaway9853Ай бұрын
They don’t make them cobra radios 🐍like they used to what a great piece of history.
@GeorgeEI7KOАй бұрын
I had one of me own here last year. The nightwatch even worked on it!
@greyhound0zАй бұрын
I'd love to own that radio
@GeorgeEI7KOАй бұрын
You and many others I would expect mate!
@ghanditwАй бұрын
theres a one on fb marketplace but its deer
@GeorgeEI7KOАй бұрын
@@ghanditw I never seen a cheap one yet Mike. I got good money for mine as the nightwatch still worked. Hope you are well buddy
@ghanditwАй бұрын
@@GeorgeEI7KO yes m8 im good
@M0KNM-Amateur-RadioАй бұрын
How do you power yours? Ive got an active di box and said it powers via 12v dc or 9v battery....... Only every time I power it via 12v i get noise but powered by 9v it works fine
@GeorgeEI7KOАй бұрын
Ive a modified CB supply that outputs 9v at 5A capacity
@gazzabyerun9048Ай бұрын
Nice bike, new to your channel, I am from the States in the Green Mountains VT, had a friend from Nottingham UK tell me about your channel, cant wait to hear that bad boy running, what are you running for a header/pipe/ can?
@GeorgeEI7KOАй бұрын
Hi and welcome along. The headers and link pipe are cobra SR1. Just a carbon fibre race can as I didn't want to cut down the original cobra can. I can't wait to hear it run myself. Bit bogged down with radio work at the moment. But we will be back at it soon enough.
@japautosalonАй бұрын
One of my all time favourites. Had one with the battery back up years ago
@kierangoodisson1188Ай бұрын
Great job thanks George
@GeorgeEI7KOАй бұрын
Very welcome
@EricTechstuffsАй бұрын
Good to see it turned out well ! 73
@billybiker1383Ай бұрын
Looking good there mate, good job 😊
@GeorgeEI7KOАй бұрын
Thanks 👍
@PiltdownpaulАй бұрын
very nice, cant make my mind up over the blue.
@GeorgeEI7KOАй бұрын
Fair enough! I like the blue on a custom rig!!
@petergreenei2iu962Ай бұрын
Lovely restoration George well done looks class any midland 7899 available
@GeorgeEI7KOАй бұрын
Hi Peter. Cheers man. They are not a radio I'd have much time for now to be honest. Its a total nightmare keeping one of those running. The double sided PCB makes them a right pig to work on as well.
@Team-fabulousАй бұрын
I have a mint boxed Madison under the spare bed somewhere, haven't seen it in years.. Must dig it out.. PS.. I thought the last of the Madisons had an LED clock!
@GeorgeEI7KOАй бұрын
The led clock was the uniden madison.
@Team-fabulousАй бұрын
@@GeorgeEI7KO gotcha...
@johntarpley6635Ай бұрын
How much you want for it
@GeorgeEI7KOАй бұрын
It's not for sale.
@g1fshАй бұрын
Superb job mate very nicely done. Its a treat to see the video of the finished radio. Well done George.
@GeorgeEI7KOАй бұрын
Glad you enjoyed it. Hope you are doing well mate.
@Hobo-HenryАй бұрын
That is an incredible radio, such a collector with hi/low and fm. no way on god's green earth would i see one in the states. I envy the owner of this beautiful piece of history. 73's
@GeorgeEI7KOАй бұрын
A rare bird for sure.
@georgeogrady449Ай бұрын
What is it cb
@GeorgeEI7KOАй бұрын
Yes. It's a base station I restored.
@Triple888jimАй бұрын
i was stupid enough to sell one years ago which i regret and these days you need a second morgage to get one
@captainkirk4800Ай бұрын
My channel 9 switch when on UKFM takes me to 28 MHz.
@darylcheshire1618Ай бұрын
like a visit to the dentist.
@roberthargrave2212Ай бұрын
Lovely radios, I have one with the Maurer conversion and frequency display fitted
@GeorgeEI7KOАй бұрын
I've seen a couple of those done. They look nice.
@billybiker1383Ай бұрын
Hello mate from the Philippines, looking very tidy there mate, good job as always.
@GeorgeEI7KOАй бұрын
Thanks 👍Hope you are well mate!
@LeeKirkman88Ай бұрын
I have one George just as tidy as this one with Original Mic.
@GeorgeEI7KOАй бұрын
Good man Lee. I hope all is well on your end mate.
@AdamSWLАй бұрын
Nice to see you back playing radio George! Hope work isn't getting the better of you. I work one weekend a month and I'm knackered! 🥱
@GeorgeEI7KOАй бұрын
It's an absolute disaster Adam. there are 2 weeks out of the 4 that have a very short turn around too, example finish Saturday 8am and back in Monday 8am. Totally wrecked at times to be honest.
@christiantondo5036Ай бұрын
man of the day! thank you
@GeorgeEI7KOАй бұрын
Any time!
@thatfonkyhonky336Ай бұрын
recapped 2, about to do #3
@GeorgeEI7KOАй бұрын
A great little radio for sure.
@tommyboy9998Ай бұрын
You are getting that annoying pulsing/ignition noise on 555 there too huh? it's been rampant here in Dublin also. Thought it was local, apparently it's not.
@GeorgeEI7KOАй бұрын
I've had it here at this QTH from day 1. I'm so used to it now, I dont pass any remarks on it any more.
@patrikdujmovic5600Ай бұрын
Hello my English is very bad, but if I understand this problem is about the bolts that hold the aluminum V bar and only 4 of them need to be replaced? thanks.
@GeorgeEI7KOАй бұрын
you need to make new threads and use bolts 1 size larger
@g1fshАй бұрын
It's been busy today George best it's been for a while.