Hi! Does the handle feel sturdy on the HTVRONT Manual Heat Press?
@caliryder8597Күн бұрын
SAM!!!! Love it!
@karenmarkle5983Күн бұрын
I could use a little help. I uploaded a file to engrave and added a text. The text works perfectly, but the file will only cut. Can you help me figure out the problem?
@deebabbyyyyy2 күн бұрын
How did you get this cut? Die cut or kiss cut? & how do you remove the stickiness form the transfer tape? I have tried alcohol and dish soap.
@Michellespartyplanit2 күн бұрын
@@deebabbyyyyy I don't use the die cut or kiss cut feature. This was done before that feature was available. And I didn't have any sticky residue from my transfer tape.
@hannahs_planet2 күн бұрын
I had zero clue what was happening at first, but once i saw the final product i was very impressed!
@sandraarana28732 күн бұрын
How many oz was the first tumbler you demonstrated?
@derrickawarmsley27503 күн бұрын
Puff needs to be pressed twice.
@Michellespartyplanit3 күн бұрын
@@derrickawarmsley2750 The manufacturer of the puff vinyl didn't have that in the instructions. I'll have to try again! :)
@Michellespartyplanit3 күн бұрын
Read more about my review over on my blog - michellespartyplanit.com/2024/07/htvront-manual-heat-press/
@BlessyMacam5 күн бұрын
Hi Dear, what kind of puncher you use for the circle? Is that ordinary shape puncher or there is special one for thick magnet puncher?
@HutchinsCreativeCreations6 күн бұрын
I love these with my whole soul!!!!
@ashleygowdy7 күн бұрын
I can’t get my cricuit to do the print / cut feature, every time I try it RUINS whatever I’m trying to cut. I’ve recalibrated it at least 10 times now. I’m starting to get so upset for all the wasted vinyl 🥺 any tips???
@susanmartinez806011 күн бұрын
Where did you get your supplies from
@Michellespartyplanit10 күн бұрын
they are listed in the description :)
@tambur849212 күн бұрын
Is it possible for the wecreat to do a print and cut? If I had a sheet of ephemera for card making is there a way to trace the designs and have the Wecreat cut them out? I'd love to replace my Silhouette and Brothers machines with one of these :-) Thanks
@MOOB30012 күн бұрын
impressive work.❤❤❤
@1520909112 күн бұрын
Is that normal glitter htv or specific htv for sublimation?
@JaxJaz201614 күн бұрын
Hey everyone!! Do you cut your vinyl the same exact size as your image?? I feel like mine never lines up when I press it...
@YagwitOG16 күн бұрын
I should do this on a backpack 🎒
@dfalcon907620 күн бұрын
What if you don’t pay for the access?
@Michellespartyplanit20 күн бұрын
@@dfalcon9076 then you can make stickers using the offset feature instead.
@livingmytruelife20 күн бұрын
How did it handle the wash test? A few videos on YT have indicated that sublimation color on HTV doesn't hold up well after the first or few washes. Is there a partcular brand that does really well? Thank you so much for your time and sharing this vid!!
@Michellespartyplanit17 күн бұрын
I didn't wash this yet because it's a bag but I have done the exact same thing on tshirts and they hold up well. No fading. I use the htvront raiinbow glitter htv.
@livingmytruelife10 күн бұрын
@@Michellespartyplanit Thank you so much for responding Michelle!!! This really helps!!!
@rachell941021 күн бұрын
Thank you 🙏 I do both sublimation and vinyl but never thought of this 😮 I loved your video. Thank you again 🫶🏻
@nicolettemarshall836921 күн бұрын
Thank you for taking the time to explain that A and B part LOL some how I missed that and was truly frustrated. Cute buttons keep posting :)
@countryisrecordsangellosou779723 күн бұрын
Love this! I just bought eight of the lowballs for the kids. Where did you get the design? Etsy, probably? But there are so many! And the wooden spoons! I have watched so many of your quick videos and I love them! They inspired me to buy a PYD Life mini oven. You're awesome!
@Michellespartyplanit23 күн бұрын
Thank you! I made the design using images from creative fabrica :)
@staceyangello759623 күн бұрын
@@Michellespartyplanit OK! I found a design that looks like yours. One more question - do you have a link to the spoon that fits in that lid?
@Michellespartyplanit23 күн бұрын
@@staceyangello7596 I don't, I had them in my party stash from years ago ;)
@davidcambron24 күн бұрын
I DavidCambron claim those words for me in my life 😊
@JHOIBONDOC24 күн бұрын
the gray and white thing - what is it called
@JHOIBONDOC24 күн бұрын
hello what material you used to put the magnet at the back
@ClaireNicole-yc5nv25 күн бұрын
Hello. I’ve been trialing sub on faux leather with different processes. That is working but they always seem to press with some sort of a blur or daze. Any thoughts or suggestions?! Thanks so much!! ❤️🥰❤️
@ClaireNicole-yc5nv24 күн бұрын
Also unsure if they look that way because they're watercolor prints. Or, if that shouldn't matter at all. I'd be happy to provide you pictures of what I'm talking about - if you have any way of doing that. Thanks so much!
Where can I can I get that sticky stuff to hold insert in?
@Michellespartyplanit28 күн бұрын
The adhesive is part of the cutaway card. It comes with it already in it.
@49lucky29 күн бұрын
This is great because I'm always losing mine😅😅😅😅
@darthvader319229 күн бұрын
I never know the CriCut can do more than just stencils. Cool ideas thanks
@Michellespartyplanit29 күн бұрын
"I find your lack of faith disturbing." lol ;)
@darthvader319229 күн бұрын
@@Michellespartyplanit you got a point! I need to have more faith. lol
@darthvader319229 күн бұрын
But really you are very gifted and I think I can learn from you🌺😎
@Michellespartyplanit29 күн бұрын
@@darthvader3192 Thank you!
@deyzytoussaint7100Ай бұрын
Do you give class ?
@CreativitiesgaloreАй бұрын
Wow, blast from the past!!! I remember the Sizzix Design Team and also that 50s event they held. I still have my Big Shot and accessories might need to take them out and use them 😊
@MichellespartyplanitАй бұрын
YES! Lol, I don't think we had met yet at that event, but we were both there! xoxo
@CreativitiesgaloreАй бұрын
@@Michellespartyplanit no we hadn't met yet. But I think it was shortly after this when we officially met
@49luckyАй бұрын
Oh my goodness I forgot all the goodies you can make with the big shot. I'll have to find mine😅😅😅😅
@MichellespartyplanitАй бұрын
YAY! 🙌
@memo1995eАй бұрын
وش نوع الحبر الي استخدمه لالطباعه ؟! اقدر استخدم الصور المطبوعه بطابعه عاديه ولا نوع معين ؟!
@MichellespartyplanitАй бұрын
Sublimation ink from a dedicated sublimation printer
@peggykinney8801Ай бұрын
How do you take the drawer brackets off. It say to press down. For the life of me I can’t figure it out how to separate them.
@lynnwilliamson3Ай бұрын
11oz mugs if you only want to make one mug do you need to change Temp or time?
@LeslieGrantlovefaithhopeАй бұрын
The coasters came out brilliantly❤
@AishaLamina-ht6rkАй бұрын
Great idea...what is tge make and model of your heat press please
@LeslieGrantlovefaithhopeАй бұрын
This is a brilliant idea. 💡
@RainorShine1Ай бұрын
Be good for when i put clear shelve liner over my book cover i make
@LanceMcGrewАй бұрын
Sure looks like the raster engraving is not bidirectional. Is that the case?
@CreativitiesgaloreАй бұрын
Great project! As someone who is just getting started on their sublimation journey, it's good to know that felt can be sublimated on 😊
@MichellespartyplanitАй бұрын
Thank you!!! I'm glad it's helpful xo
@dianacooper5191Ай бұрын
It rotates for you! This is super cool!!
@dianacooper5191Ай бұрын
As always, great video!!
@MichellespartyplanitАй бұрын
Thank you!
@gladismendoza7347Ай бұрын
Omg you made this look so easy!!
@BeybladeattackАй бұрын
Is the quality good enough for picture ?
@jennimorrison4601Ай бұрын
I would like to know where you got the faux leather
@ktme26752Ай бұрын
It's in the details under the video description
@ghemjohnson5850Ай бұрын
What's the paper u put after called?
@2scombsАй бұрын
I tried to read all the comments before asking….. but what temp and time do you use