I'm kinda new to building gunpla but is there a difference between the expensive branded sand papers and some regular cheap sand papers found in any hardware store?
@plamomancer3 күн бұрын
That's a hard question to answer, it depends on the brand you buy. I recommend the 3m wet/dry sandpaper which I have used before and that seemed to work pretty well
@spaghettiman5124 күн бұрын
Still have no idea why you have so little views. You helped me so much as a beginner!
@plamomancer3 күн бұрын
I appreciate the compliment. I'm glad it helped!
@tamagoGG7 күн бұрын
6:19 which olfa blade fits the tamiya holder?
@plamomancer7 күн бұрын
Olfa multi-purpose art blades
@johnclan13367 күн бұрын
Something seems off? its like all the joints too exposed!
@plamomancer7 күн бұрын
Not sure what you're talking about? Everything is assembled correctly.
@theophanyy56988 күн бұрын
Can you please do a showcase of your build space and how you did it? I need to upgrade mine lol😊
@antonye.733911 күн бұрын
I would like to know what is the name of the water to stick with the sticker is? Is it just water?
@plamomancer10 күн бұрын
I just use regular tap water to release and stick waterslide decals, hope this helps!
@death2all79zx11 күн бұрын
Great work, and rockin' outro too!
@plamomancer11 күн бұрын
Thanks, will def be painting more minis in the future
@death2all79zx11 күн бұрын
Rustoleum Matte black.
@olincay341012 күн бұрын
Subbed!!! Now teach us the dark arts plzz!
@alexram_1016 күн бұрын
ya entendí porque mis juguetes armables nunca me quedan como en las fotos
@plamomancer16 күн бұрын
siguele practicando y te saldran!
@Auster937616 күн бұрын
I usually just use a Dspiae glass file after cutting off the nubs. Works pretty well every time. If there's still stress marks even when flat, 95% of the time rubbing it with my finger nail does the job.
@silversavior413020 күн бұрын
Hello there! I saw that you used water slide decals for this kit but the one I bought comes with regular sticker decals on a yellow sheet. Where did you get the water slide decals?
@plamomancer20 күн бұрын
They're the official Good Smile Company waterslide decals for the kit. Unfortunately, they only go up for pre order and are limited. There are some third party options, but I haven't been able to get any. You can check the Good Smile Company website and they might be up for pre order for another run.
@tedhodge483025 күн бұрын
This kit looks amazing in G-3 colors.
@plamomancer23 күн бұрын
thanks, definitely one of my favorite color combos
@King_of_Sofa27 күн бұрын
Respect. You did a very good job
@plamomancer26 күн бұрын
Thank you, it was a lot of fun!
@FurnoTurbo28 күн бұрын
With this technique, i'm gonna finish my 15 gunpla quickly. Thanks ! (Do you have make a video on the markers ? 'cause i'm gonna try with some gold on the mg barbatos and i research good techniques for newbies)
@busnut33Ай бұрын
Dayum!
@darkgladiator27Ай бұрын
You can use a hobby knife, or you can get a glass file for that buyback most of the time
@MontrovantisАй бұрын
You could just cut flush and then sand. i call it the "cut and sand method" that saves the pointless step of cutting the wide part for no reason at all. It's also good for nips.
@plamomancerАй бұрын
For someone who is painting that would be the way to go, however, not everyone fully paints their kits and more often than not, like to use the bare plastic. Therefore its technically not pointless as taking that extra step helps reduce stress marks from my experience. It also doesnt take that much time to do. But to each their own. If that works for you, keep at it.
@bellwitch007Ай бұрын
Is that a uv curing putty that you applied on the nose? I’ve never seen that before but I bet it comes in handy. Can you tell me where you purchased it please?
@plamomancerАй бұрын
It definitely is really handy! Its the Phrozen UV-Curing Putty from Newtype. Hope it helps on your build!
@PlasticHobbiesPNWАй бұрын
That was a great build !
@plamomancerАй бұрын
Thank you!
@MistaWikkedАй бұрын
The one thing I wish I had or knew about when starting, is how amazing a good quality glass file helps! Also how amazing sanding sponges are for curved pieces.
@plamomancerАй бұрын
I have just used glass files recently and they are very convenient for certain areas
@Enkye_ARTАй бұрын
Honestly. Glass file, all day every day. Only tool I use now. It’s like rough grit sand paper that leaves a surface so shiny it’s better than the mold itself. Every piece I have now has nub marks that look better than the rest of the plastic.
@plamomancerАй бұрын
I started using glass files recently myself, total game changer and time saver for general assembly. I still do the traditional way depending on the nub but I also fully paint my kits so definitely depends on your style
@elunicotobiasАй бұрын
Thats really cool
@inazumatan70502 ай бұрын
The most time saving technique is knowing which parts are highly visible and you should spend time sanding vs gate nubs that you will never see and can snip away.
@plamomancer2 ай бұрын
Agreed. If it's not visible, No need to polish it out. A good point.
@Gelles222 ай бұрын
CAT! CATS! This is the best video I've seen that actually shows what lighting solution you opted for. I plan to get a Pace in another couple of years, so this was a great video.
@plamomancer2 ай бұрын
Glad you found it helpful!
@cirno93492 ай бұрын
But all those yummy fumes!
@plamomancerАй бұрын
My lungs!
@chuunico2 ай бұрын
Easily the most informative video I've seen when it comes to nub marks and stuff. I built a Deathscythe MG as my first kit a day ago and I had the misfortune if being so full of myself and assembled it all while a lot of nub marks are still on it, lmao. Anyway, I'll do my best to sand the visible nub marks and eventually top coat it. Lastly, you earned yourself a subscriber.
@TheHandsomeCow_2 ай бұрын
That UV putty you put in the feet is something I’ve never seen before! I would love to use that on weapon holes. What is it?
@plamomancer2 ай бұрын
Its UV Curing Putty from Madworks/Phrozen. The branding seems to change but when I bought it, was advertised from Madworks. Works great for small patches like those feet you saw.
@Teapose2 ай бұрын
Looks good! I never got to the Necrons in my Indomitus box before I decided I wouldn't be able to finish it and dumped it, those look nice!
@Bootywurk2 ай бұрын
Hell yeah! A great looking squad!
@oonooneoo2 ай бұрын
You're a brave man to post your first miniature. 👍
@JoshJohnson-em8fu2 ай бұрын
Welcome to the hooby! Those necrons look great!
@plamomancer2 ай бұрын
Thanks a bunch!
@sjsart71812 ай бұрын
You can (at least as of a couple of years ago the last time I did it) contact Games Workshop customer service and request a PDF of the assembly instructions for free for just about any kit no matter how old. Good work, BTW.
@Winter_huntsman2 ай бұрын
They turned out great! If your ever wanting to do more warhammer stuff tau battle suits like the coldstar commander may be right up your alley
@ultimapanzer2 ай бұрын
I'd like to add that the C'Tan were basically gods to the Necrons, and the Necrons eventually rose up and killed/defeated their own gods and seized back control for themselves. Not a lot of factions can say they killed their own gods!
@jazzching372 ай бұрын
👍👍👍👍
@ChubbsMcgoo2 ай бұрын
Kind of surprised you didnt go with any Tau battlesuits as they are the closest to gundam in 40k.
@benren73052 ай бұрын
Dropper bottle citadel paints HUH?
@taxman37492 ай бұрын
I don't know if I believe you.... You have a suspiciously high amount of citadel paints for a guy who has never painted Warhammer before... And a Gunpla expert... But you DIDN'T start with T'au...? I think I'll keep an eye on you, boy.... ....because it was a good video. Well done.
@taxman37492 ай бұрын
I don't know if I believe you.... You have a suspiciously high amount of citadel paints for a guy who has never painted Warhammer before... And a Gunpla expert... But you DIDN'T start with T'au...? I think I'll keep an eye on you, boy.... ....because it was a good video. Well done.
@plamomancer2 ай бұрын
Lol. I used them for the smaller details on gunpla believe it or not. I was honestly considering T'au, but Necrons appealed to my love of skeletons.
@sadlyanuxtakustan89502 ай бұрын
Excellent job. Very good execution, it was very interesting to see 40k models painted by a gunpla enthusiast and from that perspective.
@plamomancer2 ай бұрын
Glad you enjoyed it
@Omnivolv2 ай бұрын
Stop lying 🤥 first go
@raiderboy1052 ай бұрын
I have no interest in gunpla, but you earned my subscription simply because high-quality content should be rewarded. Good job!
@bloodangelsassaultracoon30672 ай бұрын
Once more, James Workshop claims another soul...
@sfcsamc123 ай бұрын
one of us one of us welcome
@joshforrester47873 ай бұрын
Lord Duncan Rhodes what say you?
@ShadySKWASHA3 ай бұрын
What mouse is that you got with the EVA colors?
@plamomancer2 ай бұрын
PWNAGE Ultra Custom. The colored shells are sold separately on their website.
@uruk_bye12323 ай бұрын
Necrons were my first miniature love as a kid. Do yourself a favor and look through the lore in their 3rd ed codex. It was wonderfully creepy. Great painting, bro. Glad to have you.