Shop Talk with Brett

Пікірлер

@WillyD1 10 күн бұрын

I bought same one what a piece of crap customer service is the worst they don’t warranty nothing I had the red cap on pump break 3 months old they would not send me a cap wanted 50 bucks Simpson really stands behind there products I will never deal with them again over a cap I paid 700 bucks for that used it 3 times buyer beware the thing hops like a kangaroo 🦘 junk I’m selling it 450 garages brand new looking still got box 450 no less I’m getting a kranzle they really stand behind there products this is my first and last dealing with Simpson everyone makes big deal over that pump that thing is junk the whole set up is trash

@woodwind1335 14 күн бұрын

Hey Brett! Can you tell me what size ultrasonic cleaner this is?thanks

@shoptalkwithbrett6572 14 күн бұрын

3 liter

@ojmccaf63 20 күн бұрын

Hi Brettciool😊

@ojmccaf63 20 күн бұрын

Hi brett

@ojmccaf63 20 күн бұрын

Very nice

@ojmccaf63 20 күн бұрын

Found your shop and thought would comment! I need to put on the notifications bell

@robertmailhos8159 Ай бұрын

Honda come mow with us the transmission on the Toro is cold blooded

@wayneessar7489 Ай бұрын

My Honda cuts best at 3.5 and lower. Your test at 4 was very good, that was a bunch of grass...!

@shoptalkwithbrett6572 Ай бұрын

Ever since I took down the shrubs, I started cutting at 4” front and back. I am more vigilant at keeping the front yard cut more since it’s what’s seen from the street. I alternate between the Honda and the toro each time I mow.

@PappysCycles 2 ай бұрын

I heat mine fully before I start the timer

@TheNovaJohn 2 ай бұрын

Not bad,,,Looks kewl! We can chat about this on a live too. I'm wondering about the older craftsman and its twin blades! Shove a different battery in it! Kinda like that. BTW, ya cousin is Yet another natural camera person!

@ih5508 2 ай бұрын

...had good performance with vevor ratchet, diesel heater, can't wait to use the ultrasonic!

@jacekgoda2731 2 ай бұрын

Could you measure the inside dimensions of the basket? I consider buying this one in case the bike parts i usually wash would fit inside

@boon219dg 2 ай бұрын

What happened to honda

@shoptalkwithbrett6572 2 ай бұрын

Honda quit making walk behind mowers in September 2023 in the United States. Right now what you see is their remaining inventory but once that’s gone, no more from what I gather.

@LewisMowersandBoats 2 ай бұрын

That just don't make them like they used to buddy 😊 thanks for sharing brother 👍 🙏

@LewisMowersandBoats 2 ай бұрын

Wow brother Brett 😊 nice buddy 👍

@marriedwithsmallengines 2 ай бұрын

That’s so cool!!

@KensSmallEngineRepair 2 ай бұрын

Neat mower Brett!

@jamieo8653 2 ай бұрын

Nice mower!!🇺🇸

@robertmailhos8159 2 ай бұрын

That definitely is a classic mower that you are using Brett

@henrymurawskibigdogrepair 2 ай бұрын

Nice to see the old ones still at work

@jamieo8653 2 ай бұрын

Classic…….great machines……thank you!!🇺🇸

@TheNovaJohn 2 ай бұрын

Yea,,,,it did bog down a little especially in one area toward the beginning. Schwaweet

@Raven-cq5di 2 ай бұрын

I recently purchased two of the same units you just reviewed, also purchased on Amazon. The first lasted only about two hours before it locked up and wouldn't rotate. Thinking it was a fluke, I ordered another for overnight delivery as I needed to get my cleanup done over the weekend. Before I relate what happened with the second unit I ordered I will mention the first had a solid brass body under the rubber cover and a .040 orifice size. Amazon describes it as having a .030 orifice size. I received the second nozzle and this one was feather light as this one was made out of aluminum anodized to look like brass. This one had an .030 orifice size as described. This one only lasted less than an hour before locking up. I'm using a Dewalt 3400 PSI machine with a strainer and filter so Im confident its not any particulate matter in the water. Unfortunately Simpson appears to be sourcing these from multiple manufacturers using different specs and packaging them as the same unit. The only thing common to both nozzles I purchased was they fail prematurely. Your video was just fine but you just didn't put it to the test of a couple hours of use. Both of the units I bought worked fantastic until they didn't...

@appleztooranges 3 ай бұрын

I bought a Honda hrx217hya with the 200 engine. Kinda pissed since it takes 3-4 pulls to always start. I had the overhead valve leak and the speed was too slow when I first got it. Never had issues with Hondas before until this machine

@DawnJiang-kd6me 2 ай бұрын

I have the honda gcv 190 hya that is a monster.

@appleztooranges 3 ай бұрын

Love Honda. I got a karcher 3050 older pressure washer I got used and when that goes I’ll be buying one of these!

@JOEZEP54 3 ай бұрын

Hi Brett, sub # 478 & .👍 # 4 Stay well, Joe Z

@shoptalkwithbrett6572 3 ай бұрын

Thanks Joe. Much appreciated.

@biggiechungus1397 3 ай бұрын

I just picked two of these up for 150 for both. They start right up and work like a horse

@GhostDanceCanyon 3 ай бұрын

What octane fuel? I think this should run on regular but on the tray it says "Premium Gas Pressure Washer" with the words premium and gas in red letters suggesting they go together whereas it could mean this is a premium quality gas pressure washer. I have one ordered so I'm wondering. I already agree that the 25' hose is too short and they don't sell the 5/16" braided Monster hose, only the stiffer and heavier 3/8" version.

@shoptalkwithbrett6572 3 ай бұрын

They mean premium quality pressure washer because the Honda GX series engine is commercial grade as is the Cat pump. As for fuel, I run 93 octane in all my outdoor equipment with a good fuel treatment.

@davidaustin9065 3 ай бұрын

Bought one. Was bad out the box vevor is a china bassed compnay. Has no costomer support to actual do anthing only wants to reply by email and never replies back.

@Garth2011 3 ай бұрын

"Centriffical Switch" ? What do those do. I hear that "click" on some of the bench grinders we have. Dayton is good stuff. Not sure but I don't believe they are in business any longer or if they are, they are run by another company? I have one of their office desk fans 12" oscillating. It's used at least 5 time a week all day/night and continues to work perfectly since about 1976.

@shoptalkwithbrett6572 3 ай бұрын

That centrifugal switch is used to switch the starting windings off once the motor reaches a specific RPM. There are two sets of windings on this style of motor. Starting and running windings. At startup, both the starting and running windings are in play. Once the motor reaches a specific speed, a spring loaded set of centrifugal weights move outward and act on a set of contacts that control the starting windings this turning them off and just the running windings are in play. When the motor is turned off, and the motor slows down to a specific speed, the spring loaded weights retract thus closing the set of contacts that control the starting windings so when the motor is turned back on both sets of windings are in play for starting.

@gregmccarter2176 3 ай бұрын

The turbo isn't even close to the regular one...thanks for the heads up. I won't buy the turbo

@shoptalkwithbrett6572 3 ай бұрын

That isn’t the best turbo out there. Plus, that was my first time trying one. I’ve used it several times since this video was made and learned a few tricks to make it more effective. That being said, it’s not the best turbo nozzle out there but not bad for the price point. I mostly use my 15° tip depending on what I’m cleaning. But the turbo nozzle does quite well for edging concrete before using the surface cleaner. And it works great for cleaning under a nasty mower deck. I used it in a later video on a sidewalk and driveway cleaning video and it did quite well over I got used to the proper technique.

@Doug_Hefernen 3 ай бұрын

Always use deionized water not tap.

@louisnatkin5317 3 ай бұрын

Is there a pressure adjustment on the pump?

@shoptalkwithbrett6572 3 ай бұрын

On this one, no but if I want less pressure I can throttle the engine back since it’s not a set Governor.

@LewisMowersandBoats 3 ай бұрын

Looking great brother 😊thanks for sharing 👍

@LewisMowersandBoats 3 ай бұрын

Great job brother 👏

@LewisMowersandBoats 3 ай бұрын

Looking great brother Brett 😊

@steadyeddie7453 3 ай бұрын

Just got to be careful when cleaning these carbs off lawn and garden equipment. Especially the smaller 2 cycle carbs. Many have tiny check valves in them that are inaccessible, and they are made of a material like mylar. If you use the wrong chemical or excessive heat in the tank you will damage the check valve(s) and then the carb will no longer run properly.

@shoptalkwithbrett6572 3 ай бұрын

You got a good point. As far as the little 2 cycle carbs I don’t really mess with those to start with. For what it costs for a carb kit and the labor involved it’s just as expensive for me to just replace the carb. That way everything is new to start with.

@philliphall5198 3 ай бұрын

Dawn dish soap and 100 degrees seems to be safe 😊

@steadyeddie7453 3 ай бұрын

@@shoptalkwithbrett6572 I'll still enjoy rebuilding the tiny 2 cycle carbs. The kits run ~ 15 bucks, and with my labor it's cheaper than buying an OEM carb.

@steadyeddie7453 3 ай бұрын

@@philliphall5198 Good to know. I will try it. I also will sometimes soda blast the carb for a like new look and nice finish. Literally takes ~2 minutes. The soda completely washes away unlike sandblasting.

@shoptalkwithbrett6572 3 ай бұрын

One of the reasons also that I don’t rebuild those mini 2 cycle carbs is I lost all the vision in my right eye and have limited vision in my left. Thus, I quit taking in any handheld equipment and pretty much just do mowers.

@DawnJiang-kd6me 3 ай бұрын

I tested it in wet grass on mulching mode and it did outstanding.

@shoptalkwithbrett6572 3 ай бұрын

Oh yes. The blade design and the powerful engine. I have a vid of mine going through tall grass and it didn’t bog down at all.

@DawnJiang-kd6me 3 ай бұрын

@@shoptalkwithbrett6572For this beast we don't use the bag we do the mulch or rear discharge and it works great changes the lawn how it looks in the summertime.

@robertmailhos8159 4 ай бұрын

That is a great mower when you can keep the engine running while you are able to cut the blade off

@jjclarkson3261 4 ай бұрын

Hit the carb body and most parts with a thin coat of WD40 immediately after cleaning and drying. You'll notice a good difference in results and 'preserves' it until installed and used.

@shoptalkwithbrett6572 4 ай бұрын

Thanks JJ. I’ll give that a shot on my next carb clean.

@BrucesShop 4 ай бұрын

Nice video Brett

@shoptalkwithbrett6572 3 ай бұрын

Thanks Bruce. Much appreciated. I’m still learning with this thing so some of it is trial and error but I’m learning from you guys as well.

@JohnnieBravo1 4 ай бұрын

You are gonna love that US cleaner Brett!! I had not seen the Simple Green Aircraft Cleaner. I did use the Simple Green Pro, that also doesn't turn carbs gray, but it may not work quite as well as that stuff you used. I'mma get some of that and try it. I have a 4-wheeler carb needs cleaning coming up shortly.

@shoptalkwithbrett6572 4 ай бұрын

Glad you liked the video. I got that simple green aircraft cleaner from Amazon. Watch how you mix it just in case but it worked well. In fact, I’ll put a link to it in the description.

@zenithtuberadio 4 ай бұрын

How's this model compared to the 3200 your ALH3228-s ? I see the 3200 is in stock at Low's

@LewisMowersandBoats 4 ай бұрын

Can't go wrong with a good carb cleaning 😊

@LewisMowersandBoats 4 ай бұрын

Looking great brother Brett 😊

@LewisMowersandBoats 4 ай бұрын

I like chainsaws 😊 thanks for sharing brother 👍 🙏

@LewisMowersandBoats 4 ай бұрын

Can't go wrong with good cup of coffee 😋

@LewisMowersandBoats 4 ай бұрын

That green is cool too Brett 😎

@LewisMowersandBoats 4 ай бұрын

Very nice 😊

@LewisMowersandBoats 4 ай бұрын

Very cool brother 😎 i have to say this is my favorite video of yours 😊 thanks for sharing buddy 👍

Ең жақсы KZfaq

Пікірлер