Hi mate I forgot to say I got the same cam cover and the breather pipe adapter on mine when you screwed it in hit the bottom and did not breath at all just check it ? I had to cut mine and it came with the cover so you would have thought it would fit properly
@macauleyholmes64032 күн бұрын
You may know or may not But my s3 cold starts fine Drive it 10 mins turn it off and back on again it sometimes stalls Could this be crankshaft sensor?
@macauleyholmes64032 күн бұрын
I know Carly isn’t the best but this is fault code it throws up (p072600)
@Daddycooldaddycool2 күн бұрын
I've had a forge pcv delete on my stage2+ cupra r for 30000+ miles and not had a single issue
@ryanpalmer52143 күн бұрын
Big up the TPS driver 😂😂
@sh4n4mkh3 күн бұрын
What did you black the reae breathers off with ?
@nomessininc.3 күн бұрын
Blocked the pipe off. We’ve took it off now check the last video we uploaded it nearly killed engine
@Fr11zzo5 күн бұрын
Also customer supplying parts 🤢🤢😂😂
@nomessininc.5 күн бұрын
Jacks not a customer technically he’s the garage idiot so usual rules are not applicable 🤣 For normal work we don’t allow customer supplied parts if we can help it 👌
@Fr11zzo5 күн бұрын
As a tech, I know this feeling so well. Good to see it’s the norm 😂
@olivergregory28895 күн бұрын
All part of the fun lads, had a sameish problem with mine casing a misfire 🤣
@koala-bear5 күн бұрын
Yuuup keep the weak ass pcv system standard on these.i swapped mine back from the forge plate because it was smoking
@mikeybmw15 күн бұрын
Phill is a top bloke , mapped my mk 7 gti to 340 ish bhp
@rowanszanto28665 күн бұрын
You needed a dunce cap for that talk at the end
@nomessininc.5 күн бұрын
Bald cap
@Carambe5 күн бұрын
Shit happens lads, at least you’ve got it sorted!
@nomessininc.5 күн бұрын
Defo mate
@roybamford86985 күн бұрын
Is your catch can the breath kind ?
@nomessininc.5 күн бұрын
Yes it was mate, they’re just not fit for purpose with that rocker cover. We tried to get it to work correctly but no luck
@roybamford86985 күн бұрын
There is another way but it’s naughty vent to atmosphere there is a video on KZfaq that shows a guy doing his think it was a Audi he had his to the side of the turbo from the catch can ? But your in good hands has you know so if they say they run better with the pcv then I’m sure there right
@JamesRyan-rn2qu9 күн бұрын
Glad to see you got the safety squints on 👌
@florian55886611 күн бұрын
wondering how the face would look like after the airbag blowing the carbon fiber cover into the drivers face in warp speed. gets me angle grinder wheel explosion vibes.
@nomessininc.4 күн бұрын
Still be handsome 😎
@florian5588664 күн бұрын
@@nomessininc. are carbon fiber fragments the 2024 gold tooth?
@seandyke168812 күн бұрын
Nice work buddy
@TENNESSEETRACKHAWK12 күн бұрын
Hey bro I have a swapped R here in the states. Sleeved motor, custom cams, IROZ 1300 kit (72mm), IROZ billet intake, Syvex, AP brakes, Litespeed magnesium wheels, CF everything weighs 2900 lbs.... I need a custom intercooler for my build can I order this from this company to for my MK7 or is this something custom from Rada? Thanx bud.... BTW looking DIESEL bro been hitting the gym I see its working lol
@nomessininc.9 күн бұрын
Hi bro, it won’t fit off the shelf, could contact rada but if not you’d have to get it made to fit like tom did to this one, cheers boss 🤝
@TENNESSEETRACKHAWK9 күн бұрын
@@nomessininc. ok great thanx for the info so I would have to custom order that do they make one that fits or will I have to do some fabbing thanx
@ethandj12345678912 күн бұрын
for summer, you hands down cannot beat a small water/meth setup. dont need much to stay a little above ambient and last forever.
@nomessininc.12 күн бұрын
Got water/meth tank in boot also 😎
@Carambe12 күн бұрын
Looks mint!
@Meekss-m9q14 күн бұрын
What have you done with the fuel tank lads? Just fitted the lpfp from gti or swapped to petrol tank, struggling to find petrol tank for mk3 caddy to use 🤦🏻♂️
@nomessininc.10 күн бұрын
Drained the tank and swapped lpfp in iirc mate
@henrylynch943718 күн бұрын
🤤
@nomessininc.18 күн бұрын
Unreal munch in poland trust me
@Carambe19 күн бұрын
Looked mint Jack! Might have to get myself there one day
@adamturner525019 күн бұрын
Can’t believe I’ve only just found this channel..love it lads👍 got a 7.5r myself but yours I’ve unreal!!
@colinmills867021 күн бұрын
🇯🇲🇯🇲🇯🇲🇯🇲🇯🇲🇯🇲🇯🇲 real bad man yo big up
@simonkennah490926 күн бұрын
Any chance you could get mr bellman to check his emails/facbook. Need some of his electonic wizardry doing on my van. Thank you.
@nomessininc.26 күн бұрын
They are busy this week with customers they will get back to you as soon as they can on facebook 👍
@simonkennah490926 күн бұрын
@@nomessininc. Thanks👍 email was sent 19/6 for ref
@nomessininc.26 күн бұрын
@@simonkennah4909 they don’t usually check emails just facebook for bookings
@user-rb1yf4he9q27 күн бұрын
I read that stock valve train plastic covers can fail in the pcv pathways, resulting in smoking. I see you are using aftermarket billet cover. Have you noticed any difference with it. And which brand are you using.
@nomessininc.26 күн бұрын
Theres a video coming out soon about that billet cover causing issues so i’d avoid at the minute and just replace pcv to save your headache
@OscarWilson-ix7bk29 күн бұрын
favorite series
@CarambeАй бұрын
Happy belated birthday Jack 🎉
@nomessininc.Ай бұрын
Cheers brother
@alexgerling3686Ай бұрын
I've actually been looking for a titanium intake for my golf R Mk7 I have an apr intake with forge inlet pipe at the moment just think it would be sick!
@nomessininc.Ай бұрын
If your in the uk tom can make you one 👍
@alexgerling3686Ай бұрын
@@nomessininc. North Wales bud 😁, I'm getting all bits together for a stage 2 first but how can I keep in contact?
@nomessininc.Ай бұрын
@@alexgerling3686 @tc_performance on insta, stage 2 bits in stock aswell 👍
@Seemann74Ай бұрын
Finally 👌
@rstvanАй бұрын
The colour is a mile out it's impossible to match new paint to old without blending it. But if your happy with it 👍👍👍
@nomessininc.Ай бұрын
Camera makes it look worse than it is in person its pretty close
@olivergregory2889Ай бұрын
Where’s the ducting pipe from, giving me to many ideas for mine👌🏻😂
@nomessininc.Ай бұрын
Ebay mate i’ll stick the link in the description for you, its what i used for the race heater in the mk4 aswell 👍
@jonjonpunАй бұрын
Happy Birthday Jack! 🎉🍻🎂
@Jordan_raceАй бұрын
Now I’m panicking 😂
@ismailhajatАй бұрын
The turbo flutters 😮💨 this car is literally made to be driven around back country roads, my dream car, I’d love to drive one some day.
@jaydonmaytum4328Ай бұрын
Don’t suppose you remember what size spanner was needed to adjust mate?
@nomessininc.Ай бұрын
No mate sorry
@jonjonpunАй бұрын
Lads, where’s the Caddy?
@nomessininc.Ай бұрын
New caddy update is on the way 👌
@AF24LАй бұрын
Reaaaaaaal badman
@CarambeАй бұрын
Glad to see you back boys!
@aaronhelmer1570Ай бұрын
I bought them thanks for the video
@nomessininc.Ай бұрын
Welcome mate enjoy 👌
@derek8c829Ай бұрын
How long does a build like this take and cost from start to finish?
@nomessininc.Ай бұрын
I think it’s been around 3 years since it had a 2.0 in it, can’t comment on cost though as its been 90% done in our garage, apart from mapping, engine forging and geometry work.
@Tom-GrayАй бұрын
Need more videos on the caddy gti
@nomessininc.Ай бұрын
Filmed one other day mate
@asherkimball8349Ай бұрын
Fucking hell dude that thing is wicked
@nomessininc.Ай бұрын
Check out the POV drive its a weapon 🚀
@dunkparra3947Ай бұрын
Do you know the reason for this im having the same problems
@nomessininc.Ай бұрын
If you have a bartek catch can/rocker cover it’s a poorly designed catch can like we said in the video.
@dunkparra3947Ай бұрын
I have a speedwow catch can, do you think that is the issue?
@nomessininc.Ай бұрын
@@dunkparra3947 theres a big update coming in the next couple weeks but we’ve taken the rocker cover off and back to oem one its been causing a bit problem this week. So for now if the smoke is really back go back to oem rocker and pcv system
@fs.audi.8p2 ай бұрын
Im gonna put one on my audi a3 1.8t ko3🙈 Thank you for this video
@michaelsan10412 ай бұрын
Insane!!!!
@Aussiebuck2 ай бұрын
You still have this? Based in New Zealand Id like to buy it off you :)
@Aussiebuck2 ай бұрын
You still have this? Based in New Zealand Id like to buy it off you :)
@CRAZYHORSE1873 ай бұрын
Everything about the Golf is really nice, 1 thing I would change though is those wheels, really nice golf dude. Get them wheels off please, she's a BEAST!!!!
@tille26033 ай бұрын
where u get all that carbon from?🔥 link plz help me out😅
@TehUxie2 ай бұрын
Ali express
@nomessininc.Ай бұрын
Premium Deutsche carbon
@nomessininc.Ай бұрын
All the stuff like the scuttle panel and wipers, stuff under bonnet is all custom by @exclusive_composites