Mixing the cement onto the soil with an excavator (🙆♂️), no homogenisation of the material (😳), this is a bloody joke. In my country, no certified engineer would ever approve this 🤦♂️
@tinkeringtrucker519613 күн бұрын
Man, please please please dont pull straps over sharp.edges like that. Seen to many of them shear right in half at the corners
@biggestnate3Ай бұрын
Ain't that always the way!
@dustyroads8342 ай бұрын
I don’t know what it is about those Komatsu motors but they all sound like they have a bunch of midgets inside the block beating with ball peen hammers trying to get out.
@a_reptiledysfunction52673 ай бұрын
Those are skid steers with angle blades 😂
@RunkStillRides2 ай бұрын
Inexperienced comment.
@SIMS_Construction3 ай бұрын
Proper comparison would have been a d51 to that nxt gen d3
@apennameandthata20174 ай бұрын
Four hours on it? Will it get more powerful when it’s run in?
@kevinkrempely23354 ай бұрын
They both look like good machines. However I love the Japanese technology! KOMATSU !
@christopherrubay39184 ай бұрын
I hate the small cat dozers what used to be the k series. The inside of the cats are very uncomfortable. I don’t like the way the controls are set up. Can’t seem to get the set and the controls to fit me. As far as small dozers go I would take a John deer , Komatsu or case over the cat hands down.
@golfbravowhiskey86695 ай бұрын
With about 20k hrs under my belt 95% of that time on d6 and JD850j our Land man bought a new kd37n for me last year i put about 300hrs on it now and they only benefit I can tell to the Komatsu is the visibility is great, but it's ruff and rattles and squeaks like hell. My last 850j had 9987hrs on it and it was 10 times quieter than my new Komatsu.
@andycalcutt21776 ай бұрын
I just bought the same unit. Thanks for the intro on how to use it, take care.
@tedhansen38467 ай бұрын
Congratulations on Your new machine! Thanks for the video of the D-3 next to Your D-6. I'd like to see Cat's D-1 through D-6 side by side.
@harvynussbaum51828 ай бұрын
Just what you said about. The location of the 2 dealers is enough for me to go with a cat. I believe they're both good machines and they're both gonna break. So who's gonna support you the best when it's broken? That's the choice you make.
@smunro8519 ай бұрын
Buy American
@davidlambert253710 ай бұрын
Nobody likes a winer ....
@pszarek810 ай бұрын
I worked on both of these machines. The less reliable Komatsu Cat has broken down in this respect.
@aaronburford570111 ай бұрын
Liked, subscribed, shared! Like the finifjed result!
@jamesschultea779011 ай бұрын
Just done mine YESTERDAY GREAT job on the video very helpful Thanks alot
@darrenfournier8432 Жыл бұрын
I like the new number change on the cat finally they are in order.
@arturobayangos1223 Жыл бұрын
Komatsu lasts longer and the parts have longer life . That is a fact .
@donatasdonatas8304 Жыл бұрын
Leica best
@janericchannel4513 Жыл бұрын
Did you figure out what is was that was broken? Is that a 617?
@HardRockConstruction Жыл бұрын
Broke the gear on the bottom of the gear box.
@donhull3857 Жыл бұрын
Comes downto the dollar
@diggindirt7362 Жыл бұрын
why have you not made any new videos
@HardRockConstruction Жыл бұрын
I guess I got lazy on filming. The past two years we have been slammed with work and like everyone else short handed, I just can't find the time.
@TS-yc9kf Жыл бұрын
I love how a bunch of grown ass men can get on here and say the polar opposite of each other about the same damn tractor. Buy the CAT, invest in the quality, resale value, service, dealer partner. Komatsu makes cheap crap and if you need to see the blade better than operators have since the beginning of time you need to go back to being a laborer.
@rovermckissock2292 Жыл бұрын
Cat makes cheap cheap crap as more and more of the shit is made in china and man it is noticeable
@rambo6119 Жыл бұрын
Moving your camera way to fast. Slow down a little and your presentation will be much better.
Beautiful machine you can't go wrong with a caterpillar dozer
@chippyjohn1 Жыл бұрын
Komatsu for the win, Cat for the bin.
@indiancreekspirit5102 Жыл бұрын
Yes greetings from Boonville Kentucky
@cordellej Жыл бұрын
nice exhaust stack taking up a quarter of my forward visibility
@derekhankins6683 Жыл бұрын
If your looking there, your not a dozer hand...
@randyberetta6277 Жыл бұрын
CAT all the way.!!!😁
@patrickmacgonegal Жыл бұрын
Nice, I'm considering doing this. Is there much difference in the driver's view through the windshield? Follow up alignment necessary?
@HardRockConstruction Жыл бұрын
I do not notice any difference in the view. I did not get it aligned right after. I put new front tires on it about 5000 miles after the lift and then had it aligned. In those miles I could not tell it wore the tires or drove different.
@robbiesmith97862 жыл бұрын
How much was it $$$
@stevecapps63322 жыл бұрын
Great video, I am wanting this same system.
@HardRockConstruction2 жыл бұрын
It works really good for my small herd. I have added 2 12x24 sorting pens and a 10x20 alleyway since the video.
@amandalafountain74522 жыл бұрын
Imagine a dozer with a winch hitch thingy. The extra weight man would just be perfect for it to bite and grip. Well actually they already have that it's called the tractor with the rubber tracks for a road. Big CASE farm equipment.
@amandalafountain74522 жыл бұрын
Okay the ripper already is lol. I make my self laugh sometimes
@amandalafountain74522 жыл бұрын
Wider tracks/cleats for these dozers man I'm telling you all.
@amandalafountain74522 жыл бұрын
Lol a push of war.
@cheeseymccheese72492 жыл бұрын
Hey man, i bought a 4th gen with the 2inch already installed. Its trashing my front end and im going to take it out. My question is was there some kind of spacer rubber puck that came in the truck originally that you discard when installing the new leveling puck. Just trying to get everything in order before i take it out and return to stock.. Thanks!!
@maplemanz2 жыл бұрын
I agree when it comes to dealer support no one can even come close to Cat.
@maplemanz2 жыл бұрын
I have spent many hours on a Komatsu D61PX and love it its got the ability to fine grade or hog dirt and the cab and controls are top notch.
@Bushguyrocks2 жыл бұрын
Nice machine. Way to mangle the English language. Yikes!
@markvolker11452 жыл бұрын
I know it's a rental, but it's never good to put a diesel under load until it's got some good heat in the engine
@Brian-hd4rf2 жыл бұрын
HEY I THOUGHT I WOULD COMMENT ON YOUR VIDEO SINCE I HAVE AN OLDER 5075E OPEN STATION AND MFWD TRACTOR. I ALSO BOUGHT MINE USED FROM THE LOCAL JD DEALER. SO MY TRACTOR WAS A 2014 MODEL ADVERTISED ON THE TRACTOR HOUSE WEBSITE. I THINK IT WAS AN ABUSED CHILD SEEING THAT IT MUST HAVE BEEN A TURKEY OR CHICKEN HOUSE LOADER THAT NEVER SEEN THE INSIDE OF A SHELTER OR A PRESSURE WASHER OR ANY GREASE LUBRICATION WHAT SO EVER. TURNS OUT THE ENGINE IS GOOD BUT IT HAD A LOCKED UP FRONT END PIVOT AND BRAKES THAT WERE STUCK SEMI LOCKED UP. THE CLUTCH WAS ALSO PRETTY MUCH SPENT. ALL THESE ITEM I FIXED MYSELF WITH MY SONS HELP SINCE HE WOULD BE USING THE TRACTOR FOR HIS PROJECTS AS WELL. I LIKE YOUR BUILDING! SEEMS TO HAVE GREAT UPPER AND SQ FOOT SPACE. I PLAN TO DO SOMETHING SIMILAR. YOUR VIDEO MAY BE OLD FOR ONLY 2 VIEWS SINCE 2021 BUT MINE DON'T GET MANY VIEWS EITHER. GOD BLESS GOOD BUDY! 2014
@chrislaycock27622 жыл бұрын
What brand and size tires are you running?
@HardRockConstruction2 жыл бұрын
In the video I believe those where Hankook at2 or at3. Now I’m running some falken wildpeak they where both 255/80/17
@mikewarren78552 жыл бұрын
Too much grease
@scottaddison80712 жыл бұрын
My new D3 delivers next month. How are you liking your new D3?
@HardRockConstruction2 жыл бұрын
No complaints it’s everything we thought it would be
@derekoverman6802 жыл бұрын
Is your pickup a cab chassis model I literally cannot find a kit that says will fit or designed for 4wd ram 3500 cab chassis I have a dually flatbed same as yours
@HardRockConstruction2 жыл бұрын
Mine is not a cab and chassis model
@CATSKINNER1002 жыл бұрын
How are you enjoying the D3 with Earthworks??
@HardRockConstruction2 жыл бұрын
It’s been great. At first the earthworks was a little intimidating but it didn’t take long to figure it out and we like it even more than our other Trimble.
@traviskidwell37662 жыл бұрын
I have case 750m right now, I got a really good deal on it so I gave it a try. It's not bad but I demoed the d3 and I think that's what I'm going with now, just bought the new 420xe backhoe too, it'll be delivered soon, cat and jd are the only dealerships close to me. Case and Komatsu are 2 hrs plus away so service has been a pain. The cat salesman really earned my respect and business more than anyone else too.