Hi, I’m about to buy the same tails lights . Have you had any problems with it , like condensation or something ? Thanks
@_wenjo6 сағат бұрын
@@leog6742 nah no issues
@jam1e.es38 күн бұрын
can you make a vid on how you changed the mounting point?
@_wenjo8 күн бұрын
@@jam1e.es3 if you're talking about the front coilovers I got a video for that already
@v1nc3nt9113 күн бұрын
How did you get so low?? I’m having clearance issues in the rear with the coilover hitting the suspension when I try to go lower on my es300 bro
@_wenjo13 күн бұрын
@@v1nc3nt91 smaller springs and no preload probaly gonna go with 3 inch 326 springs since I still can't get frame low though I got -20 degreese of camber that helps a bit
@v1nc3nt9112 күн бұрын
@@_wenjonice man I’ll probably get some shorter springs just won’t run crazy camber bc I like having tires😂 and I’m about to go on 17x8 + 25 so I won’t need much to clear I believe.
@_wenjo12 күн бұрын
@@v1nc3nt91 I had 18x8's those cleared just fine though not enough tire stretch for me. Would definetly reccomend the 3 inch 326's since your not going big tilt, or washers their cheap I did that for a bit
@vvxcp19 күн бұрын
how'd you get the boot on 😭
@_wenjo19 күн бұрын
@@vvxcp cut the bag tucked it under the cover and pulled the crown royale bag's tightening strings together
@mikemike82723 күн бұрын
This video is so fucking wrong. It should be removed. I have the same kit and there is no proper adapter.
@_wenjo22 күн бұрын
@@mikemike827 if you can't install this and make it work just sell your truck city boy
@vvxcp28 күн бұрын
what size did you get off amazon for shifter ?
@_wenjo28 күн бұрын
@@vvxcp the biggest size one
@tranglefongo71942 ай бұрын
U should check yo toe alignment
@_wenjo2 ай бұрын
I got -23 camber now figured out toe a while ago
@badger13352 ай бұрын
can you please send me a link to the spacers? And what wheel specs are you running? thing looks mint
@_wenjo2 ай бұрын
Setup is 18x9.5 +15 squared though rear has 18mm of wheel spacers also link for balljoint spacers: lowlifeprojectsllc.com/products/llp-toyota-celica-2000-2006-lower-ball-joint-extension-plates?_pos=5&_sid=9e953a4e9&_ss=r
@artgarcia35312 ай бұрын
Can't hear a word your saying
@_wenjo2 ай бұрын
Ok 👍 turn up volume
@Wutsparks3 ай бұрын
Appreciate the video, this generation doesn't get much love like the rest of Lexus models
@sdsurfgirl604 ай бұрын
Try changing the filter
@Ocelot19374 ай бұрын
What did you have to order from bc racing to make it work? What part?
@_wenjo4 ай бұрын
The coilovers are for a 01 toyota camry tophats are from lowlifeprojects and springs are swift springs, except for the rear tophats and springs my coilovers are how they came from bc
@Ocelot19374 ай бұрын
The part under your thumb at 10:21. That’s a separate part you bought from bc racing? I already have bc racing coilovers and lowlife top hats.
@_wenjo4 ай бұрын
@@Ocelot1937 forgot I bought those they are the spring hats from the front coilovers I forget what their called specifically but they cost a bit
@mohammedumar83825 ай бұрын
Can you put these camber plates on any coilovers?
@_wenjo5 ай бұрын
If you can remove a coilovers tophat Then yeah probaly
@mohammedumar83824 ай бұрын
@@_wenjo how about the rear coilovers for a honda CL9 coz no brand sells them with camber plates for some reason.
@_wenjo4 ай бұрын
@@mohammedumar8382 idk I used the coilovers I had, 98 to 01 camry bc coils
@litomartinez50585 ай бұрын
Get some 80 180 220 grit sand paper. Then get some glass bondo it’s harder then regular bondo but get some of that to. Harbor freight sell a hammer and dolly kit that might help to. But to be honest I would go to the junkyard and cut the rear fender arch and weld it. I’m about to do the same to my ES. Anyways good luck
@_wenjo5 ай бұрын
Yep im gonna send it with what I got but if I were smart I would do the same
@j0-pu3xo5 ай бұрын
thanks for the good info homie🫡
@_wenjo5 ай бұрын
Fr? I messed up the editing on this video I considered it bad
@KAIZOSARETA5 ай бұрын
What size are those
@_wenjo5 ай бұрын
18x9.5
@skeletoncollege5 ай бұрын
Can you please make a video of the whole car and not the engine bay and quarter panels??? Like bruhhh
@_wenjo5 ай бұрын
Most likely already done that
@SlammedAvalon5 ай бұрын
How did you stop the wheels from touching the Coilovers when you added more camber
@_wenjo5 ай бұрын
Spacers, my wheels have a +15 offset 15 mil spacer and a 3 mil spacer got me to -3 offset thats for the rear front is just camber plate Edit: my lowlifeprojects rear camber plate video shows what my current camber is, might make another video for getting extra camber in the rear
@SlammedAvalon5 ай бұрын
@@_wenjo thanks for responding so quickly
@_wenjo5 ай бұрын
@@SlammedAvalon you're welcome
@Holdingcastle465 ай бұрын
goodluck brah. also fw the steering wheel looks sick
@GHETTOMOBB6196 ай бұрын
I dont need camber arms to camber the rear ?
@_wenjo6 ай бұрын
Nah, these cars dont use arms for camber unless you count the toe arms. I got videos that show how I got my current camber
@saucymcnasty6 ай бұрын
can u take it out the garage,a better view of it
@_wenjo6 ай бұрын
cv axles kinda broken
@wxdddadon6 ай бұрын
nice vid. i was looking for an example for when i put mine on next week
@_wenjo6 ай бұрын
I hope it somewhat helps, mainly dont cut too much off the sides and you should be fine
@StancedCamryXV106 ай бұрын
Bumper looks good, is that front fitment with the extended lower ball joints added ? How much camber did it give u ?
@_wenjo6 ай бұрын
Nah just slotted top hats i got a video on that though ball joints may be soon edit: -6 from tophat with balljoints may be -8 to -11
@Swalxa6 ай бұрын
Thank you
@Holdingcastle466 ай бұрын
I fw it update on the floor rise?
@_wenjo6 ай бұрын
Got a cutting wheel juat need metal plates and a tig welder
@Swalxa7 ай бұрын
can you make a video of how the bumper looks on car
@_wenjo7 ай бұрын
Sure, not today maybe tomorrow if im up early enough
@_wenjo6 ай бұрын
Ill have the video up tomorrow
@_wenjo6 ай бұрын
Video is up
@wxdddadon7 ай бұрын
hey i just got that bumper how did you get it on?
@_wenjo7 ай бұрын
Cut the sides and drilled holes though somewhat oem mounting places I only use zipties to keep it up. If you cut the sides of the bumper leave some lip I cut too much off it looks like crap
@Holdingcastle467 ай бұрын
fuck bro that sucks i hope everything gets better in the upcoming weeks sendin luck your way!!
@saucymcnasty8 ай бұрын
what size rims u sittin on? n what type coils ?
@_wenjo8 ай бұрын
18x9.5 rims bc racing coils on 50k springs no preload
@Holdingcastle468 ай бұрын
Sad to hear wont post for a bit but goodluck with all,man! Love the content
@_wenjo8 ай бұрын
Thanks, also can't lie gonna be interesting figuring out where to get metal plates for a floor raise
@user-bn2ks7uk8u9 ай бұрын
RFCA3500B
@RonxYagami9 ай бұрын
Bro thank you this one is so much better than the last🙏🏾🙏🏾
@_wenjo9 ай бұрын
2.0 video is up kzfaq.info/get/bejne/iJ2ZeLVnsMi4j4E.htmlsi=3YQ_NRNgiMAAgV0r
@rickkywitablickky41319 ай бұрын
I LOVE HERRRR!!!
@_wenjo9 ай бұрын
Thanks, car's pretty clapped currently but it is able to be fixed
@RonxYagami9 ай бұрын
Yo bro how to I actually pull off the shift knob ? I unscrewed the screws in it and tried pulling up but it wasn’t really budging. Ik the overdrive is connected but if I tug hard enough it should come out right? Or do I manually have to take of clip on the side of the shifter with a flathead or something to get too it? Can u help me out🙏🏾
@_wenjo9 ай бұрын
Last I remember at 1:16 you gotta pull that plastic peice out it will be difficult but you will be able to get the overdrive out and then be able to remove the shift handle
@RonxYagami9 ай бұрын
Ohh ok that makes more sense, I was fucking with it the other day and my car got stuck in neutral and wouldn’t go up to reverse or park it was so weird. It was like that for few days but it’s good now
@zanerain32399 ай бұрын
I have a 1997 es300 an With the 120h quick release hub does it fit snug on the steering column bolt cause cause I was in your last video it was pretty lose I don’t want to waste money and have a striped column bolt.
@_wenjo9 ай бұрын
Column bolt wouldn't be an issue Torque the bolt down to 27 lbs or something that'll stop the looseness
@_wenjo9 ай бұрын
Im gonna be real the hub adapter won't come off without a steering wheel removing tool. I hadn't had experience with hub adapters up till that video and I would say it is safe to use the hub adapter.
@zanerain32399 ай бұрын
It’s the SRK 120h right from the Toyota Camry cause nrg doesn’t make one for the es300.
@_wenjo9 ай бұрын
@@zanerain3239 yeah most functional parts are the same between the camry and es300
@sadboyaintcry9 ай бұрын
how u gona shift it to d or r mode
@_wenjo9 ай бұрын
I would push the shift handle down and put it in gear
Still fine I think the isses come when you stack bigger wheel spacers onto eachother like a 15mm spacer on a 20mm spacer but I also know dudes that do that.
@OGYELLOW10 ай бұрын
@_wenjo thank you. I have to stack a 5mm and a 20mm.
@_wenjo10 ай бұрын
@@OGYELLOW yeah shouldn't be an issue mind you Im also on 50k springs -10 camber and damaged wheel studs in the rear with tje stacked spacers nothing broken or ripped off
@quangtruong856411 ай бұрын
Sorry, i can not watch it longer, dizzy by keeping my eyeballs rolling like....
@Bmphotog11 ай бұрын
Highly recommend springing for the cloud sheet bed jet sells.
I was driving an accidently pushed. Something but it said like 90+ or something idk if it was decibels but my radio sounds extremely loud now
@_wenjo Жыл бұрын
@@slickthasloth5441 do you mean the volume dial? You can also change stuff in the audio settings menu but you may just need to turn down the headunit dial
@jam1e.es3 Жыл бұрын
how hard was it to install??
@_wenjo Жыл бұрын
As long as you dont take a lot of material off the top sides of the bumper not bad could be oem fitment but I took a lot more material off than I should quick releases are my friend now *It was pretty easy*
@leecaldwell1029 Жыл бұрын
questions what volume do you listen at? I use 25 volume on it when I am rocking out and cant go much higher than that. Normal just cruising I listen at 12. thanks!
@_wenjo Жыл бұрын
When im cruising 4-6 going hard 7-8 anything over that can be heard through doors and thats on my oem 600w amp, my car does have a premium audio package whatever that means. Should clarify I can hear the person singing even if the car door is closed at 7-8 *i think I could hear the person at even lower levels but I forget haven't drove my car in two weeks*
@saintpreferred9223 Жыл бұрын
Piece of cow manuere video.
@sgtJOOSEcapeS Жыл бұрын
😂 just sell it start over and get the rest you didn't spend for the amp budget.... Cuz its problems on top of ine...
@_wenjo Жыл бұрын
Man thia video is from a long while ago things change
@sgtJOOSEcapeS Жыл бұрын
Come on brotha 💪🏾 get new ones.... They cheap ... You didn't have to go through that trouble....