This old video was so helpful to replace my old cords. A million thanks dear friend!
@TheLovePeace76 ай бұрын
Thank you so much 😊
@TheAdChick7 ай бұрын
LOVE your shirt
@jejalam27 ай бұрын
Hi. Thanks for the video. If I want to replace all the sliders at the same time, how do I go about doing them? Is there a lever to undo or do I need to unscrew something. Thank you.
@dallasfairall15110 ай бұрын
Thank you
@PanamaSticks11 ай бұрын
This looks tricky, but I'll give it a try. What bothers me is you never showed the cord ends after you were done. Is it a loop to go around a tension pulley like my system? Or two separate cords to open and close? And if a loop, how do you ensure that the length fits the tension pulley ?
@uhenoalvarez3480 Жыл бұрын
THANK YOU, you just saved me a lot of frustration! I'm doing this for my neighbor.
@OceanKingNY Жыл бұрын
Thank you so much for making this video. I thought I was going to have to buy a new traverse curtain rod, but when I watched this, I bought a $5 replacement cord and gave it a shot. I had to start over a couple of times, but your instructions are so precise, that even I, one of the most un-handy people around, was able to get it eventually. 😁 You did the entire job in 10 minutes, but it took me about 1-1/2 hours to finish. Thanks for the tutorial! Much appreciated.
@misterhill5598 Жыл бұрын
Handy tips: 1. use Blue Tac on the tip of the cord to keep it tidy. Once your job is done, remove the blue tac. 2. Alternatively, use a gas lighter to melt the tip of the cord. This way the tip of the cord doesn't tear as you work with it.
@blahblahblah6965 Жыл бұрын
cord, teething puppy, ticked off ! ugh. thanks for this video
@eliorota2802 Жыл бұрын
Thanks Vee, so helpful for our new home.
@tylahselle-mcaboy5108 Жыл бұрын
This is the best video I've watched! So much easier than so many I've watched, and right to the point! Thank you so much.
@houzhead6588 Жыл бұрын
God sent...thank you SOOOO MUCH!!
@barbarabailey51782 жыл бұрын
Thank you very much. Buying a $5.50 cord was much more affordable than replacing our ancient (60+ years) traverse rod.
@bohofarmgirl2 жыл бұрын
Thanks so much, this is so helpful. Really appreciate your time taken to help others 🤩🙏🏼👍🏻🇦🇺
@colinmackness57092 жыл бұрын
Finally,someone who talked you through the process clearly with helpful graphics,thank you
@lolazak2 жыл бұрын
How to place rod carriers in the centre of the rod?
@coreyburnett47202 жыл бұрын
Stud!
@lucacostantini83613 жыл бұрын
Thank you so much!
@cbara5683 жыл бұрын
Brilliant!!
@jackzouyuquan90943 жыл бұрын
My curtain cord came out from the track and stuck with roller when pulling the cord. How to put back the cord into the track please?? Thanks
@jackzouyuquan90943 жыл бұрын
The best demonstrated. Thanks 😊 🙏
@davidbanner42453 жыл бұрын
Hi from the Adelaide Hills, South Australia. Just to say many, many thanks for your great instruction video. I spent a lot of time trying to get the darned traverse cord restrung. You helped me do it in just a few minutes. Best wishes and regards, DavidB.
@jejalam27 ай бұрын
Hi. Any idea how to replace the sliders as mine had broken of? Thank you.
@HareRajan3 жыл бұрын
beautiful instructional video. Thank you!
@wafaahmadalmalki86283 жыл бұрын
You are one of the most beautiful things in 2020 Thank you very much you made this video in 2008 but till 2020 it`s the best and maybe the only video teaches us how to fix a Traverse Curtain Rod in this clear easy way0 From PALESTINE thank you very much
@deborahwright33233 жыл бұрын
I was having all kinds of trouble then I came across this video AND I DID IT ! THANKS
@CourtneysAuntSara3 жыл бұрын
THIS IS THE MOST USEFUL VIDEO ON KZfaq!!! THANK YOU THANK YOU THANK YOUR
@joebloggs6193 жыл бұрын
Very clear explanation but it would be necessary to remove the entire track from under its pelmet to replace the cord because it would be too hard to thread the cord through etc working from such and awkward angle, with the pelmet etc, standing on a chair etc, plus I am scared of heights. Easier to simply get an expert to do this job for me.Trouble is, finding one who will even do such a small job. I approached some but they would only fo it if I had toreplace all cords on all my windows, to make it worth their while. I only needed one replaced, so the broken cord is still that way, after a couple of years, unable to find anybody who can do this little job where I live. Anybodyvwould think there was no unemployment, no small businesses in the window coverings industry in need of a dollar, after the bad economic impact of Covid on small businessesin Australia.
@bempartington42994 жыл бұрын
We moved in to this house. Took off the traverse rod for painting. Can’t figure out how to make the pulley system work again. Can we Facetime you? Can you please help us? You are very good at explaining.
@Oxford3224 жыл бұрын
Hey my transverse rod was “ inside “ a normal looking rod (?) I bought house w it - it’s strong broke
@user-wb9ji7lh8d4 жыл бұрын
What's name is it? Please. ..
@t.obrien84384 жыл бұрын
Very good video! Got me up and running in no time! Incidentally, I was trying to place where I heard the accent before. It was the Al Pacino character in Scent of a Woman! Hooo-ahhh!
@paulwooster35904 жыл бұрын
A good video kept to the basics and was very well done. Hat off to you Sir, you did well. Thank you!!
@sugarhoneysweets4 жыл бұрын
Thank you that was very helpful. I have my grandmother's custom made curtains and I was confused on the rod. 😊
@beverlydel-sali11974 жыл бұрын
Thank you! I had an old rod I'd never used before whose cord was in 2 pieces. I decided to try knotting the first side of the main traverse and follow his directions to the 2nd traverse. Then I knotted it in the left side and knotted the new cord on the right side. Continued as specified and then knotted the 2nd cord on the right side of the 1st traverse gathering up all the slack. It worked!!
@rabidavid6145 жыл бұрын
Hi, I want to replace the cord on my Integra iPole Glyda curtain pole, as the cord supplied hangs just 1 metre from the pole. Can you recommend what type of cord should be used? Does it matter whether it's Nyloñ or Polyester? Does it have to be braided or what? Thanks for you advice
@betg91505 жыл бұрын
Awesome video thanks
@clairealmquist16635 жыл бұрын
Thank you thank you.
@leroysr19515 жыл бұрын
Thank you 🛠🛠🛠🛠🛠🛠🛠🔩🔩🔩🔩🔩🔩
@oatnoid5 жыл бұрын
No, no no, I need instructions for a one way carrier. NOT a split carrier. Total waste of time watching this. UNLESS you are stringing a split carrier.
@martinperth42625 жыл бұрын
Very helpful, thanks
@turtile95 жыл бұрын
Thank you very much for posting this tutorial. It enabled me to fix the set of drapes I had broken last year at my brothers house. Saving me atleast $35.00.
@mansouralasmari53135 жыл бұрын
Thank you
@denniskrentz42216 жыл бұрын
Really, really complete and helpful.
@jackiebills2246 жыл бұрын
Short and to the point. Very helpful-thank you for putting this out.
@ThePodac6 жыл бұрын
May I know what kind of string you used for this?
@philanna386 жыл бұрын
Use a tweezer to pull the cord.
@xkxkxkxkxkkkx6 жыл бұрын
I only had a vague idea what a traverse rod was but it sounded like what I was looking for. I'm thankful you decided to make this informative video.
@charleshildebrandt43086 жыл бұрын
Use a lighter to melt the ends of string to keep them from fraying, that way you don't have to keep trimming them.
@soslala6 жыл бұрын
Best instruction video for restringing an old rod like I had. Thank you!