I have the exact same Bora and because of your recommendation I just upgraded it with the double p-tops exactly like you did. However I started with only the one top and I've decided that just doesn't meet my needs so I am buying two more. They are *not* inexpensive and many people would choose to do something else, but I'm paying for the break-down-and-stow-away capability since I work in a crowded home garage. I can still make more money, but I can't make more time or more space. Not saying your advice is incorrect, just that different people have different needs and different budgets for money/space/time. For cutting a sheet of plywood I lay some foam insulation board on top of the bare leg assembly to support the plywood; it works perfectly and the pieces of foam insulation board fit in the sheet goods portion of my scrap cart. Many thanks for calling out the double p-tops, they are exactly what I needed.

JD and Harley both went WOKE and have a DEI program in full effect. This is a major factor for me when choosing where I spend my money. Thank God for competition that has chosen otherwise. Vote with your money.

Thank you for doing the review on a 3039 r I have the same tractor 2018 model. Yes I'm going to agree with complaints you have (some of). But overall I love the tractor and would buy it again. I did rent some other brands and they did not even come close to this tractor. I like some of these attachments or add-ons you put on. I'd like to have grab handles for the back cab Post. Yeah and I guess at 5:11 grill guard work pretty good cuz I need to do something too when I'm running my gravel ? Jeanette the function running all the way to the front for the gravel also runs my belly dick so it's a little aggravating trying to get everything switched around plugged up the way it has to be to switch to the belly deck from a grapple. You're right they needed to put some more ScV hookups on the back. Well I'll go for now keep up the good work and reviews for the Tractor.

I bought the Tekton version and it work amazing for my Milwaukee chrome sockets, I love them. Plus the Tekton wrench organizer are great.

our family has always had john deere and we are going to stick with them i’m going still support my local dealer who has helped us 24- 7 for years and all the factory workers who work hard making this equipment, the lay off are because of the bad farm economy, every brand is making equipment in other countries for years %95 of deere is still made in the usa they are only moving some of the skid loaders to mexico i don’t care about some jack ass CEO talking out his ass i care about the hard working employees new holland just moved all their combines from grand island nebraska to beigium and nobody said a word

Love my USA Craftsman Screwdrivers and my Capri Wrenches!

An air hammer is the only reason i own a compressor these days

As a DIY guy that used to be a pro boat mechanic, air makes zero sense for me. Battery technology is way too good today.

You can add and remove extra clips for the sockets that dont fit. It takes a little longer to set up than the toolbox widget but its also less than half price and made in the usa

Obviously you don’t actually work on old things. If you did you would know electric power tools just don’t really compare to air. Don’t get me wrong I grab electric first but once I run 2 batteries down trying to get things apart the air comes out and things either come apart or break.

Milwaukee is King! Why drag a hose?

They do make nice stuff. I have their locking universal joints.

Lol nailed it on the entertainment side. 😂 That’s what gives me reservations about that drawer. I’d rather store the tools flat in a drawer that’s relevant to their use.

I appreciate it's made in Taiwan. Looks nice quality. I'm going to have a crack at making mine. Subbed

Good Info thanks. I just put some extensions on my 4x4 and one thing I found out is if you put the nut in th socket then tilt the socket up and put it in the end piece then put it on the centipede it goes one with ease and you don't have to deal with the frustration.

Wear can I buy one!!

Demo dad is in the house!!! That is so cool!!!! Wow I need one for my shop!!

I have the 56" box with the hutch, the end locker and this drawer unit. And you quickly realize how easy it is to run out of room lol. But so far its been a good box. We'll see

Were you able to get it as tall as the DeWalt stool? I need thet height with a comfortable seat

You touched on one of the concerns I have with the MDF top... water. Have you considered putting a finish on it to help protect it from potential water damage.

It’s official I am jealous

Is this the 56"?

Toolbox widget when the socket rail costs more than the socket 2024 version of more money than brains club.

this guy needs to be getting way more views for the production quality

When Harbor Freight copies this, RIP Widget.

I eventually ditched the black trays and just used the rail

JMO, but I still think the peg organizers are the best. I have the Olsa tools peg rails to hold my seconds and 12-points as well. But I like just looking at the size on the peg, pulling it off, and dropping it back on when I'm done. Again, just my personal preference. Great vid, man!

Does it need a level floor?

This LOOKED like a great idea. It was a NIGHTMARE to put together, and even after done properly, I noted 2 huge drawbacks; 1) All of my Cordless Power Tools have Belt Clips, and once the added thickness of those is taken into account, there's no way to arrange ones tools without them being "Wonky". Second, as you noted, there is a MASSIVE amount of WASTED SPACE left in the drawer once this is inserted. Considering what my 72" Tool Cabinet cost, imo there is ZERO JUSTIFICATION for this amount of wasted and unusable "Real Estate". "Just say NO" to the cost of this, the PAIN to assemble and properly configure it, and all of the otherwise usable space you'll be forfeiting with this "organizer" BAD DESIGN imo!!!

That has no reason to be on a non keyed hot. Change the hot wire to keyed.

That's better! 🥰

Anybody else wish like hell we could just get an overall look at that toolbox. I really appreciate the review. I just wish you zoomed out a few more times. I feel like we are right up against it.

The cable is too short, on this model, the vevor company says that it has a 16.4ft semi rigid cable for inspection. That must be an extra accessory. Also it does not have a casing to carry it. The box will eventually deteriorate

Check out some of the dog hole uses. I think you may change your mind about ditching the current top.

Out of those three Capri offerings, Astro Pneumatic has a couple of contenders which are their ONYX 3/8″ Nano Impact (v2) rated @ 500ft/lb and the 3/8″ Nano Flex-Head Angle Impact rated @ 400ft/lb. wrenches. I don't know who came out with these first, but they're good to have. Nice Capri haul there by the way. I have the Capri super thin 14-Piece wrench set, some hex bit socket sets and the WaveDrive Combination wrench metric set. I'm not disappointed at all.

Thank you for your review.

Which ones are you using for the Ratchet Wrenchs?

This isn't a K-Tools product review. It's a Milwaukee ad campaign.

Thank you, sir!!!

Nice setup. I recently bought a 56 inch roller and would have more use for a top hutch.. id like to add the 15 inch side box and see if a 72 inch hutch would fit on top. I figure with a 1/2 plywood spacer i could bolt the top on securely. Any thoughts?

Like the spacers but they are extremely proud ($$$( of them. Why not just add the 6" casters that HF sells for $14-20 (each) to the other box, so they match the 6" casters on the 56" box?

Great honest review. I recently bought a new 3039r open station. I wanted the heavier axles and increased lift capacity on the loader over the 3038e. Now that I have some hours on it I can honestly say that it has way more power than my 3025e but if I could have a do over, I would go with the 3038e. I don’t need all frills like cruise control and auto throttle… the loader control gets in the way if I get on or off the right side, I hate the delay in motion when I hit the pedals. I love that it’s a much better built machine but don’t think it was worth the extra $8k over the 3038e.

I used mine to cut down some tree branch over growth, and then as i was downsizing the brush to load onto a trailer the chain derailed. “More than a home owner needs”

nice! before they made those, i made a custom one out of wood for my drawer, i used the wasted space underneath to put my air ratchets/air hammer down i. the bottom, still left me enough room that i was able to build a little cubby shelf that holds my air chisel bits, and air drill keys, things like that. great video!

Great video. I put one of these in a husky box. After repeating every on of those issues i had to cut 1 1/2 inches off the bottom ( its to tall for husky ). I disagree about its usefulness. Its significantly less than anything comparable. For the wasted space , lay ratchets or other tools. I look at as the value of the tools and the convenience of access vs space used. No matter if you like it or not , this is a great help tutorial.

I went with husky because of the soft close and cheaper at the time

I was never a fan of those deep drawers, and I agree about the organizer. I keep my power guns/drivers on a wall rack.

And I usually just use a 2x4 piece of particle board like you said. I split my 4x8 into a 2x4 and a 4x4. The 4x4 is big enough to process plywood and the 2x4 is more portable

I love this table so much. But the tops are a waste. A piece of plywood is a bit lighter and a lot less expensive. Three-quarter inch holes drilled in the plywood and insert a three-quarter inch dowel into those holes down into the holes on each of the legs. That keeps it adequately stable. Those finicky plastic things that come with it are not for me.

Great video and personally the low seats are great for working on cars which is what most people would use it for. I bought one of those dewalt seats and returned it after a few days because it was so terrible, it was easy to tip over with its narrow base and being so tall, too tall in my opinion for working on most equipment. The seat was very terrible and casters were garbage but otherwise it was pretty sturdy built. I was wondering what are the brand of those white and stainless cabinets that you have all over in the background. I have the gladiator garage works kind but i personally haven’t seen the ones you have. Pretty cool