“Because you can’t touch them by hand” “Oh I just touched them by hand” LMAO
@low57ar58Күн бұрын
Big dex holding it down 😂
@lowboyz4745Күн бұрын
@@low57ar58 always 🤟🏻
@fishrrelaxing93612 күн бұрын
If your runner doesn’t drive your vehicle and log data they are not a tuner at all
@nickstaed6 күн бұрын
I was just flipping threw videos glad i would this cause removing that plate to get the wire threw is what i needed to see for running my amp wire
@odingaceres9644Ай бұрын
My car doesn't have the blank space for the fpg light button. All my space have a button already
@WilCokerАй бұрын
GOT to get me some
@CoyoteMischiefАй бұрын
What was the HP gain?
@Squeaks187Ай бұрын
I'm having an issue installing mine. What are the additional black and red wires for? My lights aren't working 😊when i tap the additional red and black wire, it lights up and goes off.
@acadianr2legerАй бұрын
Ugly ass mirror covers lmao
@LucrStvnАй бұрын
You'll connect it to "that one"
@ChristianHillyer-rd9idАй бұрын
I appreciate what you guys where doing but massively annoyed with the lack of seriousness and information on actually installing the harness
@jose102692 ай бұрын
Would that fit a TRD?????
@lowboyz4745Ай бұрын
Honestly not sure brother but the only difference in TRD’s and XSE’s are the aero packages that come on the TRDs and the clusters are different I think it just needs to be 2021-2024
@tuskullnfe31422 ай бұрын
You know if they have these for 2019 Camry se?
@Angelvq2 ай бұрын
2021-2024 only
@marathonlogistics99432 ай бұрын
Throw some coilovers on that thing already 😂
@Angelvq2 ай бұрын
Trust me Iam lol
@marathonlogistics99432 ай бұрын
@@Angelvq dope otherwise 👌 those fog lights prob fit is 350 too
@descendinggod97402 ай бұрын
You T-tapped way too close to the actual headlight harness pigtail house, so now if fails later down the line, you will need to purchase a new pigtail harness because there isnt enough wire exposed to extend it and do another T-tap attempt. The best 3-way tap method is to twist the original w/ the Tap wire on 1 end, and crimp it with the original wire on the other end. Alternatively you can use solder sleeve, both methods work. Those cheap plastic T-taps work momentarily, but in the long run they are prone to failure and corrosion. The best placement for Tapping wires is far away from the pigtail harness, that way, if a failure occurs, you have plenty of wire exposed on both ends to resolve the issue.
@JamallGoCrazy2 ай бұрын
BROTHERRR ☝🏽🤓 the video smacks
@johnguerra55312 ай бұрын
Instructions unclear I now have burned down my car. JK good content I love the new build.
@rsorona2 ай бұрын
Proud of you guys!! Love watching your videos ❤
@viewmycar94783 ай бұрын
What happened to the g35 ?!
@lowboyz47453 ай бұрын
Hibernating
@casperkellygaming41903 ай бұрын
Ok I know it's been a year and slim chance this question gets answered but.... How did you guys light up the front grill like that? Lights look great by the way. Planning on doing it to my Camry.
@lowboyz47453 ай бұрын
OP7 grill lights same brand
@casperkellygaming41903 ай бұрын
@lowboyz4745 Awesome. Thanks for the response. And the lights look great. Nice job on them. And the grill lights made it even better. Reminds me of the old school Bad Boy logo. Can't wait to get some on mine.
@jadenharron33614 ай бұрын
a quick google search would answer all the questions in thus comment section
@jacobphin48474 ай бұрын
Also what are all the things that connect to the wire harness so I don't miss anything because I'm getting to that point in my vhr swap
@jacobphin48474 ай бұрын
Do you have to buy the ecu with the harness or can you get them separately
@vlogazdehya1124 ай бұрын
Fam!! I did the swap. But for some reason I’m not getting any fuel nor spark
@jcatalan14964 ай бұрын
Won’t it be an issue having all those wires in the way whenever the car gets maintenance?
@lowboyz47454 ай бұрын
No we do maintenance on it regularly without having to remove lights
@FlexFTK4 ай бұрын
once you said "ahhhh" after you tricked him with the scratch, i knew yal had to be from texas....RGV?
@alfonso240sx64 ай бұрын
Where did u send your harness out ??
@lowboyz47454 ай бұрын
Guilty Garage
@scottgordin97094 ай бұрын
Looks easy enough to do a long tube header swap, but I I’ll say that if you would add some heat to the O2 sensor bungs the sensors will come out a lot easier.
@MsAchampion4 ай бұрын
Those l8ghts are smooth!!! 😮 😊 ❤
@jafaary26144 ай бұрын
the harness from g37 and ecu bcm and ipdm will fit in the g35 what do i gotta change or modeify in the harness to make fit in my 2006 g35
@_KerinR_4 ай бұрын
Send the harness to Guilty garage
@jafaary26143 ай бұрын
@@_KerinR_ i mean i can im tryna figure out how i can doit at home while my pops around he master electrion i just need to find the wiring digrams it for sure doable i just goota focus really be mentally if good shape.
@davidleonard40275 ай бұрын
What exhaust other than long tubes do you have?
@ip55457 ай бұрын
G35 ?
@javi2drowzyy907 ай бұрын
who custom your harness
@lowboyz47457 ай бұрын
Guilty Garage
@javi2drowzyy907 ай бұрын
@@lowboyz4745how long did it take him to work on it and ship back
@amermuscle8 ай бұрын
He needs the 6.4 mani next made a nice diffrence on mine
@damnitztuan8 ай бұрын
What size wheels and offset you running
@romeole408 ай бұрын
Outside Underglow looks sick but the ambient light for the interior looks shit and cheap
@shredsquad71588 ай бұрын
Bro that turned out way better than I expected
@benscootin432910 ай бұрын
The arrows on the lights makes it easy.
@Evman113710 ай бұрын
Hey man I hope you haven’t given up.
@Angelvq10 ай бұрын
Thanks for the support and care bro there’s so much going on in my life rn to where i can’t focus on the g but trust me bro she’s going to be alive one day soon i promise i’m not giving up stay tuned for the next G upload tho people like you keep me going i love the support and thanks for following me throughout this journey ❤️
@user-hc5rj2nr3b10 ай бұрын
What drop was on the truck? I recently bought a 2020 but not sure on what to do with. I like the set up.
@revenantpneuma363611 ай бұрын
What’s the red wire for coming from the control box?
@user-hq2mb3dz4x11 ай бұрын
Hey I’m what website did you find the extension for the oxygen sensors.
@user-hq2mb3dz4x11 ай бұрын
Hey I’m what website did you find the extension for the oxygen sensors.
@user-hq2mb3dz4x11 ай бұрын
Hey I’m what website did you find the extension for the oxygen sensors.
@officialyungtwizted3858 Жыл бұрын
So these wires actually extended all the way to the front? I have the bmw e46 coup 2001 330ci... u didn't have to bicker with the wiring just to get them to extend? Let me know cus I ordered these and waiting for them to pop in
@lowboyz4745 Жыл бұрын
They reached all the way to the front didn’t have to mess with any wiring. Just have to know where to tuck them away so nothing catches them 👍🏻
@officialyungtwizted3858 Жыл бұрын
@lowboyz4745 hell yeah. Thank you gang.
@reelmel1111 Жыл бұрын
top sp
@hannahr1442 Жыл бұрын
Have you had any issues with water damage and the box? The website said it wasn't waterproof.
@lowboyz4745 Жыл бұрын
Nope no issue with water yet
@RedCdot11 ай бұрын
Aren't they water resistant?
@gavriela5096 ай бұрын
@@lowboyz4745 Can they be turned on and off? is there a button?