@@M.A.CKnivesandDrums indeed! And he makes great stuff!!!
@M.A.CKnivesandDrums15 күн бұрын
Right on!! 👍
@leonidas206816 күн бұрын
Nice 😋😋😋
@n8r8ts4116 күн бұрын
@@leonidas2068 thanks!
@DavidV4444Ай бұрын
I would stop buying from a company pulling what I call a “Benchmade” by switching something to plastic. Dad’s company is going the other way and offering milled Ti clips. Interesting.
@n8r8ts41Ай бұрын
They immediately changed clips. There were only 60 or so plastic clips tried, and they replaced anyone's who sent it in, no questions ask.
@DavidV4444Ай бұрын
@@n8r8ts41 that is great to hear! I have a Heretic E on the way (my collection is all newer Microtech’s) - can’t wait to get it.
@n8r8ts41Ай бұрын
@@DavidV4444 I picked up 2 manticore E's at Blade show Atlanta last weekend! I'll try to get some videos up this week!
@phuoctruong375Ай бұрын
Old but gold. Simple but not boring.
@darinevans7011Ай бұрын
Badass artist.
@user-ir4wl2km4cАй бұрын
Is it a real selfdefense knife for real using ?
@n8r8ts41Ай бұрын
It's large! If you needed to use it, they would be crazy to continue approaching you
@Elmax17.5dpsАй бұрын
Dope knife bruh
@n8r8ts41Ай бұрын
Thanks! 🙏🙏
@cameronchicken8439Ай бұрын
those idiots couldn’t have made a california legal version? like they made a large med and a mini of the wiener warrior which is only a half inch too long. for one thing it would be a great starting knife for a child so it would be beneficial in that aspect to keep the mini 2” or under but also there are 40 million people living in california and the only version of this knife that will ship here has to be under 2” and there aren’t a lot of california legal switchblades available so there is a market for them here and i don’t understand what they expected to benefit from making it 2.5” instead of 2”. like you see all these videos about making ambidextrous knives for the benefit of only six percent of the population when california makes up 12 percent of the american population and probably an even larger percentage of their mini auto market for the total blade hq sales and we are only one state away from their headquarters but they seem to forget we exist.
@GNMKNIVESАй бұрын
Awesome knife!
@n8r8ts41Ай бұрын
Thanks!!
@dzcm4278Ай бұрын
kalau yg ori mahal ....beli yg 1:1 pun ok juger...hehhe
@TanWalk-ge5pj2 ай бұрын
❤
@n8r8ts41Ай бұрын
🙏🙏
@dr.mehrwertgert69242 ай бұрын
Hello. I bought the Damasteel Version! 😍 This is a great Knife! 👍🏻
@joshuamackey23262 ай бұрын
Man i wis that predator was in double edge
@jesseclift37432 ай бұрын
Subscribed!
@n8r8ts412 ай бұрын
Many thanks!!! 🙏🙏🙏
@timfowler49013 ай бұрын
A have a Mechforce flashlight that is fantastic. Probably the smallest brightest flashlight I own.
@squarepusher6453 ай бұрын
Okayyyyy. much thanks for sharing and uploading.. what a total zombie slayer. amazing work they doing at Heretic. *SuBD*
@931PORSCHE4 ай бұрын
Whats run time for the light with a full battery? I cant find the lights on their website?
@n8r8ts413 ай бұрын
Bladerunnerhq.com has some! Heretic sells their products through authorized dealers. Edclifestyle.com is another good one Eknives.com Americanedgeknives.com All valid dealers!
@n8r8ts413 ай бұрын
The run time is hard to discern. I've not known anyone to daily one of them. They mostly sit in safes since they're pretty limited. I have never charged the battery in mine, and I show everyone every chance I get 😅
@ianleicester70664 ай бұрын
looking to get one ...............what are the lumens please.
@n8r8ts414 ай бұрын
New version that's out now are 1500-1800 lumens They only made 150 in this run
@fredp19834 ай бұрын
dont understand fullers on an auto... it means its purely for aesthtics.. and although its a nice lookin knife... knowing that the fuller doesnt have a functional purpose makes it look somewhat silly....
@n8r8ts414 ай бұрын
It was designed into the blade for future versions of the knife 🤫
@lovescamaros13 ай бұрын
its design aesthetics and less weight for the spring to move thus making a really snappy auto with less spring pressure.
@КонстантинОмск3 ай бұрын
blade shape resembles SRM 238x
@Monsoonpain4 ай бұрын
Shes a beauty...i hear its gonna be expensive tho
@n8r8ts414 ай бұрын
All the prototypes are in their forever homes. There were only 11 prototypes. The production version will be under 300 MSRP
@davidminor66634 ай бұрын
1143 bucks fk that
@windowbreezes4 ай бұрын
even if i make that money in a day.
@n8r8ts414 ай бұрын
Prototypes and customs are always priced accordingly. Same with every other market, if no one bought them, they wouldn't cost that much 🤷♂️ I tried to buy one and they were sold out
@DadzOfGaming4 ай бұрын
lol you are worried about the plastic what about that after thought of a bushing that is split so you could put it on after. lol hacks trying to teach. 😂
@n8r8ts414 ай бұрын
The whole rack is being rebuilt next week. We had to break into it all to get a good material list and check connections since the service was exposed to the elements.
@blakeparthenay30494 ай бұрын
Give me a manual one with Carbon Fiber scales so I can make my own flamed Ti inlays and I'm $OLD
@n8r8ts414 ай бұрын
Keep your eyes peeled! Look at the blade, it resembles a manual for a reason! 👀
@fredp19834 ай бұрын
yes... a manual would make so much sense.... @@n8r8ts41
@jimelder425 ай бұрын
Love mine
@n8r8ts415 ай бұрын
I still have not charged mine 😆 granted, I haven't used it much, but still! 2 years no charge
@ToxicityAssured5 ай бұрын
I just got #51 and it's great! I have several Microtech knives, but this was my first Heretic.
@n8r8ts415 ай бұрын
You picked a banger for your first! I love the cleric 2's!!
@jdreviews55 ай бұрын
My goodness
@n8r8ts415 ай бұрын
I'm trying to get the time for the full video review in 4k/8k
@jdreviews55 ай бұрын
@@n8r8ts41 those take FOREVER to upload ugh. Good luck man
@Elmax17.5dps5 ай бұрын
Oh my
@n8r8ts415 ай бұрын
She's a beauty!
@SonsoftheRevolution17765 ай бұрын
After having a few Chavez and SOC I dont see the hype with Chinese knives. They look and feel like gas station knives with bearings. They are not worth what they cost and just look like the delux gas station models.
@n8r8ts415 ай бұрын
I've fondled many, many knives, and there are still noticeable differences between Rike products and other Chinese makers. Believe me, there are great knife makers all over the world, and Tony wouldn't put his stamp of approval on anything short of his standards.
@SonsoftheRevolution17765 ай бұрын
@n8r8ts41 I will have my Socom Bravo Mini this week. I have heard Rike has amazing QC and is supposed to be blade steel from Microtech.
@SonsoftheRevolution17765 ай бұрын
@n8r8ts41 I also like with TM did with the Socom Bravo and made it an affordable high end.
@SonsoftheRevolution17765 ай бұрын
@n8r8ts41 Impressions so far on the Socom Bravo Mini T/E. The feel in hand is great has a good balance and weight. Typical with microtech its sharp lol. Blade profile is killer and the ti/carbon fiber is spot on. They knocked it out of the park with these collab Socoms.
@n8r8ts415 ай бұрын
@@SonsoftheRevolution1776 I loved the lockup retention! It made it seem like they were assisted open!
@meee1755 ай бұрын
$480 is a lot compared to what the Socom Bravo was released at. I think I paid $360 directly from Microtech. I hope they have an option to swap out that glassbreaker. I like the size of the breaker on the Socom Elite, low profile.
@hml23755 ай бұрын
Matrix brother!
@n8r8ts415 ай бұрын
You are correct, I got all excited 😆
@hml23755 ай бұрын
@@n8r8ts41 no worries man, I would be too!
@151ncoke6 ай бұрын
And now they come in magnacut 😂
@chasestout74916 ай бұрын
About $8200 of knife right there ladies and gentlemen! Very impressive!
@n8r8ts416 ай бұрын
I'm blessed to have had the opportunity to pick it up! Thank you!
@n8r8ts416 ай бұрын
Thank you for your sub!
@chasestout74913 ай бұрын
No problem whatsoever please keep giving the community this great content! I have a cleric 2 w/ flamed titanium inlays and absolutely love it!
@n8r8ts413 ай бұрын
@@chasestout7491 I just got the DLC full serrated Tanto! I need to get the hydra video up first, I'm shooting for this weekend!
@jdreviews56 ай бұрын
How do you like the full serrations on that cleric? I just got a stitch full serrated (couldn't find a partial 🥲) so I'm not too sure how that'll be
@n8r8ts416 ай бұрын
I've always used most of my knives, so if it's hitting my pocket, I prefer full serrated. I'm in construction, so the things we cut tend to vary in durability, but full Teeth always cuts on the first try!
@jdreviews56 ай бұрын
@@n8r8ts41 I know what you mean. I've gotta cut a lot of banding and rubber hoses, zip ties and the like so the serrations are a welcome addition. Makes sense why they don't do serrations on the customs too 🥴
@n8r8ts416 ай бұрын
@jdreviews5 microtech will add them if you request it and send in your knife, but they do charge for the labor. I think you'll like your stitch. Only thing I can think of is it's a wider blade, May pose some issues getting into smaller spots, but it has a great tip just don't pry with it 😅
@jdreviews56 ай бұрын
@@n8r8ts41 that's killer that they're willing to do that! I'm a responsible knife dad, I've got plenty of screw drivers lying about for prying 😂 I'm interested to see how this will compare to my socom elite auto, and if it'll remain in rotation after I snag a few heretic side folders
@n8r8ts416 ай бұрын
@jdreviews5 the stitch is definitely one of the heavier models, but I wear a belt so I don't mind. The spring is stronger in the stitch than the socom.
@YuhNinja6 ай бұрын
What could you possibly be using to record in 2024 that is in 360p!???? Still processing or? XD (Reviews multi thousand dollar knives with potato)
@n8r8ts416 ай бұрын
I recorded in 4k, it takes FOREVER for KZfaq to finish the upload in high Def!
@alexplus27526 ай бұрын
Hey, I lost one screw. Do you know what tye of torx screw is on your Heretic ?
@n8r8ts416 ай бұрын
Email heretic! They have the best customer service out there, if they don't send you one for free they'll at least get you the part specs
@jdreviews56 ай бұрын
$7500 ish for this knife. Absolutely ridiculous. I need one!!!!!
@n8r8ts416 ай бұрын
They are only going up on the secondary, I believe all but 2-3 are in final collections already!
@jdreviews56 ай бұрын
@@n8r8ts41 damn.. I saw a few of them for sale at official retailers a few weeks ago! I didn't think they'd sell that quickly!
@WesV6 ай бұрын
Pvk vegas has like 4 of them....
@n8r8ts416 ай бұрын
@@WesV they do?! I'm headed to their website! Thanks!
@WesV6 ай бұрын
@n8r8ts41 yessir, one is a croc leather inlay, first time ive ever seen that on a knife!
@nruva7 ай бұрын
I have one of the flamed protos. It's an amazing flashlight. Heretic really made this one right. It's in my pocket on many a dog walk, especially now that it is so dark so early up here in the north west. I agree these are really flying under the radar, but a fantastic flashlight from Heretic none the less.
@n8r8ts417 ай бұрын
That's the one I wanted! 😭 They're incredible pieces!
@dannysmith92177 ай бұрын
Must have 🎉
@n8r8ts417 ай бұрын
Indeed! You can still find the carbon fiber versions online!
@aleksandrivashko91687 ай бұрын
Stunning watch. Can’t decide which one I like better, blue or orange.
@n8r8ts417 ай бұрын
I really want a black one!! I have an avenger review coming up soon!
@davekilpatrick27157 ай бұрын
Please contact me with more info
@n8r8ts417 ай бұрын
Google layer watches, they're located in France
@chamberedusa7 ай бұрын
Is this whats being given away?
@n8r8ts417 ай бұрын
Not quite lol Maybe for a million subs 🤔
@jamesdailey24767 ай бұрын
I need this !!
@n8r8ts417 ай бұрын
They're out there! Try edclifestyle.com
@robiel3174208 ай бұрын
Beautiful. That mirror polish deserves a dlc.
@n8r8ts418 ай бұрын
One of my favorite!
@edged_mindset8 ай бұрын
Beauty
@n8r8ts418 ай бұрын
Thank you!!
@edged_mindset8 ай бұрын
So sick
@n8r8ts418 ай бұрын
Isn't it?! Thank you!!
@edged_mindset8 ай бұрын
Awesome!
@n8r8ts418 ай бұрын
Thanks!!
@derekbeans68158 ай бұрын
Thanks Nate for coming by and hanging out.
@n8r8ts418 ай бұрын
Thank you for the invite! I had a blast!!
@derekbeans68158 ай бұрын
Nice knives, met Rick in Texas great guy.
@derekbeans68158 ай бұрын
Thanks for coming by and spending some time with us.