I know that too but , The point is that I want to do everything myself 😉

Thanks , nice to hear! 👊👍

Ok nice , and I have a bmw 2002 from 71 the original color is nevada and is currently in my garage, maybe there are differences europe / usa ... which is sometimes the case with cars now too

No unfortunately no more , sold it long ago to someone who had to do the opposite of me 😁

I used M4 ;)

That is so cool to know that there are still driving around with this color, if this ever is the case I will definitely let you know , grtz

Thanks ! 😎 I really appreciate it. A real enthusiast if you have had 5 , nice ! Grtz

Thanks for The beautifull video. Can i share it with our bmw 02 club?

@@johnappelman1559 Certainly , no problem at all !

Thanks ! Is also the reason why I got the idea to make this , because before I couldn't find a nice overview either and had to search everything myself when I wanted to make a decision ;)

Thanks ! And thanks for the support 👍🙂

Thanks ! 🙏

Thanks ! I really appreciate it 🙏

Danke ! 😎 habe es gesehen und ich verstehe wo du gemeint hast , wird aber in der Tat am Licht liegen

Thanks ! , wallothnesch heb ik toen alles gevonden

Nope 😬

Thanks ! Me @ wallothnesch or mvp vintage car parts..

Nice to hear and also to know that you are also reviving a 2002 with this 🙌👍🙂 what i used , Soudal car sealer brushable.

This was honestly an in between solution ( the Ghibli is my vacuum cleaner for vacuuming cars ) , vacuum hose is way too thick is also not antistatic and clunky and I had to put a spacer to get on the sander , also I put an extra filter bag in the vacuum cleaner so the motors wouldn't break down from all that fine dust. The sander itself is way too heavy for this work , now I use a festool ctl mini vacuum cleaner with a mirka deros sander , you can also go for the festool sander is what you prefer yourself

soudal anti gravel, But to be honest , should I be able to do it again I would grab something that I can already color in that texture, will maybe do it again , As an example raptor liner has something like that

@@Restorezone we haven't seen any post lately? When do you think we will be able to see the next episode? Amazing work! Cheers!

@ Wallothnesch , grtz

I used the eastwood mig welder 175

Merci! 🙂

Thanks! 😁

Maybe then you haven't been over it enough or too fast , I don't know 😁 , but have spent hours on that , check out one of my last videos where I strip the chassis ( chassis finally in epoxy video ) , there I also use the wire brush on some parts 😉

I find the easiest way is to screw the bolt in from the inside, and just tighten it until it just touches the door. And then tighten very lightly, so that you can move the door up and down with minimum force. Then close the door carefully" be careful not to hit the fender" once the door is closed and then look at the seams, open the door halfway and slide it up and down to the position you want and check again, a video about this will seem a bit boring, this is fitting work, and it is a lot of opening and closing until you get the desired result. good luck and be patient :)

@@Restorezone Thanks much for your reply. Keep up the good work. Subscribed.

thanks , and I say good luck , for when you start ;) will be fine