How much lift are you sitting now at the rear after that? I'm between these and 899 but want to achieve 3" even after all the weight I have

Any time i hear someone call their car a "rig" i fucking cringe. Thats gonna age like milk

How do you get rid of the black front air foiler without doing bumper cut yet? Cut? I see yours is done all at once

I’ve never seen a limited beyond mall parking lots and without the soccer mom driving. I would get a front bumper replacement so nobody knows it is limited

I went to the dealership on Saturday to get rid of my piece of crap Ram. I was looking for just a basic SR5. Ended up driving home a Limited. I'm spoiled now

Just bought a 2024 Limited. Ready to begin the mod life. I appreciate you sharing your set up!

I was tempted to trade in my 2023 4runner limited for a trd ORP and then mod it because its a lot harder to mod a limited and mine is white so im not sure how it would look. This video is making me go back on that temptation and keep my limited. Thank you for the links!

I'm loving your content! I also have a Limited that I'm looking to modify. 95% of my driving will be on-road, so I was hoping to still use x-reas with a very modest front lift. Can you give a little more info on what spacer kit you initially tried, and describe the ride difference before and after the spacer was installed? Thanks!

Great job. I have the same car and I get all the tools I need to do the trim but bro, I have a question... what did u do with the arch whell attached to the part of the bumper that u trimmed? Just cut it and that's it? Did u attached with something? Thanks

Thanks for the info! Question though, do you rotate your 5th tire while doing a tire rotation? I just picked up a limited and it’s full time 4x4 so curious how tire rotations are going for others to keep that 4x4 unit held together.

Sick upgrade! Which tire carrier is that?

Thank you very much for your information I just got 2018 4Runner I love it,

Did you paint or buy a chrome delete kit? If so, which kit are you using?

Did you add spacers? Also does king shock make your ride firm and plush depending on the settings?

Very nice 4runner.. i will be working to get mine like that.

You can access the fog lights without removing the whole bumper. Just an fyi

any issues with the needle bearing with the lift? thanks

Great video. Is it possible to post some pictures of how you zipped tied the wheel well liner on both the drivers side and passenger side? Also, after the cut on the passenger side, did it expose the wiper fluid reservoir tank?

Maybe you can a led bar behind’s the grill bro. Thanks for sharing us & educate me how to install a fog light . I have a limited edition. Thanks bro😊

that intro clip felt professional af.

I have a 2016 Limited that I’ve started modifying myself did swap out the bumper cover for a Trd version, then added bulbar bumper. but a lot of the similar mods that you’ve already done KO2, Molly panels.

👍

Great video. I’m also a proud owner of a Limited model. It’s great to see other people modding out their Limited models. You don’t see much of this. Initially I did the same thing when I started modding out my 4Runner. I ran a leveling kit in the front for a quite a while and still ran with the awful XREAS shock setup. Then I went to a suspension lift. I had Fox 2.0 coilovers in the front and ARB medium duty coils installed in the rear. I also had the front UCA’s switched out. I went with some UCA’s made by JBA Off-road. I’m glad I had all of this done. This gave me about a 2-3” lift. This also allowed me to run 33” BFG KO2 All Terrains. The stance looks way better. You’ve also inspired me to do a front bumper cut. That’s a great video also by the way. Sometime in the near future I’ll be doing the cut.

I’ve disconnected mine. How did you get the flashing automatic running board light to stay off? Fuse pull?

Thanks for giving me the idea for this, looks great. Might be doing this here soon with my Limited. I didnt even realize i had tow hooks down there also 😂

What door handles did you use I can’t find any that work on limited

That's why we don't need a lot of this electronic junk, glad mine doesn't have them.

I've been looking for auto running boards for my Limited and can't find them ANYWHERE. Do you still have yours? I'd love to buy them from you! Depending on what you'd want for them, I wouldn't mind paying a couple hundred $$ for shipping.

Why buy a Limited? Isn't the TRD Offroad Premium less? Not talking trash, legitimately curious.

nice one dude

Ive got a 2014 Limited and slowly building it into it an overland rig.. This video is a living concept and i love it. Thank you!!

Damn, tempting as hell but id mess it up, lol!

I could use some real world 4runner advice. My fam is considering nabbing one of these final 5th gens. Narrowed it down to the Offroad Premium, Offroad Premium with KDSS, or the TRDPro. Resale value is meaningful, though we do keep vehicles for the long term. Mostly on-road and light trail performance prioritized. No major offroading or modification intended at this time (perhaps mods in future), but we like to have serious get-out-of-a-jam capability just in case. How would you rate these three options?

Hey man! Yours looks awesome. I got the courage to cut mine a couple months ago after someone cracked the lowest part of the bumper! Only question is: have you solved the wind noise? I get a sorta hollow windy sound now from the front sounds like blowing around the radiator area.

you need higher spring rate for your rear springs.. it sits lower than the front imo though.. solid 4runna!

Dream set up 👌🏻

Westcott makes a lift specifically for the XREAS system. I'm planning on purchasing soon. Haven't heard of any issues with it.

are those automatic running boards specific for limited models or would they work on the sport or trd models? asking cause I saw one for sale on marketplace but it came out off of a limited and I have the TRD . thanks

Looks great! Amazing what trimming a little plastic will do for the looks.

Just got a 2024 Limited. How does the King 2.5" feel versus stock with X-Reas?

First Mod thing to Buy is Rocksliders IMHO. I went TRD Pro and put on Rocksliders when tires wear out I will put on 275x70 17R and I will be done. The Pro cost a little more but it’s good enough for 99.9% of what needs done and If you don’t think so buy a Jeep with 37’s. For all think you need 285 vs 275 there is only 1/2 inch taller 32.7 vs 32.2 inch’s so with 285 you get 1/4 inch more ground clearance, and a lot worse MPG.

We need more content from you, I watch your videos constantly but we need more 🫶🏼

I have a Limited with a 1” spacer leveling kit installed, just to give it an ever so slight boost up from stock. Absolutely no issues whatsoever, on or off road. However, any bigger than that would certainly cause issues where proper suspension lift would be warranted. With that said, the factory is suspension is very robust.

Yep this happened to me 2020 two years after I bought my Limited edition. Went to the dealer because my wife kept complaining about it and they told me it was the spare tire 🤣

Now that's what you call a proper 4Runner! Looks Excellent!

best looking 4R limited nightshade on youtube!!!

Interesting 🤔. I got some advice for my ORP four years ago and went with an Elka full on suspension upgrade. Not cheap, but wow. I would not have known enough to buy something on my own, so I was glad for the help….like this video. Good on ya! Share your experiences, good or bad. And who cares what trim you got, . It’s your money, not theirs. Jeez. Cheers. 👍🤪🏳️‍🌈

Very cool mod! Any concerns with the wiring being exposed since the fender liner is gone? Thinking of doing the same thing but maybe an inch lower than your cut.

First, I'm curious, why you opted for limited instead of the TRD Off Road or the Pro? If you do lot of off roading, those seem to be better choices. As for the lift, unless you want to fit it with bigger tires to gain better approach and departure angles, I find it really unnecessary. I drove my 2020 TRD Pro on some very challenging trails with some "big boys" who have 2 and 3" lifts and nothing they could do, I couldn't. In my experience, fit it with excellent armor (Plates and sliders), and you good to go. Lifting a 4Runner changes the angle of the IFS, which accelerates the wear and tear process.

Great idea been staring at mine trying to come up with similar for my 2013 (pre facelift)Limited! I see there are rough "melted edges" with the cutting wheel before sanding and trim was added. What kind of cutting disc did you use and what speed did you find minimized the melting?