Your Electrical OUTLET is bad. It has burn marks on it. Likely some connection is dirty or loose. The Outlet is the problem.

I just made something like this, but instead I used finely shredded cardboard, instead of dryer lint. I then rolled the toilet paper roll in hand sanitizer and then wrapped it in paper towels.

Straight fwd no bs!! Thanks

Great video. Thanks.

I cut the thing right through runs perfect

I did and the shine is amazing thank you for posting❤

Your instructions worked for me!

I recognize this voice. Its Joe from family guy

Bill, just because you can get a full battery voltage across all the cells doesn't mean you have a good battery if it can not pass a drawn down test. Surface charge which shows the battery to show proper voltage doesn't mean it has capacity to do it's job of starting the vehicle.

I just completely rewired my Helix 7, and hooked it up to a new battery. 12.86 volts at the power connector. Won’t start. It works with my ice fishing setup. I don’t know what the problem is…. Or maybe the problem is the Helix 7 sucks?

I’m plotting something like this, neat to see others think alike! I’m also debating adding a fuse/wick or maybe even a spiral wick. That or some sort of striker/self igniting bit. Granted the more fancy it is the more it is for fun than utility honestly…

Can you link that battery I want to order one for my same lamp

It actually was, thanx man, so tired of havin to lay down an drop the battery out to charge it.

How to install a starter on a 1988 Suzuki intruder

is this Neagan ? if you know you know

Thank you so much I can not tell you how much it helped

I smacked mine with a screwdriver and it worked

This guy sounds like Joe biden

I had a plug on a portable heater get really hot . So i just changed the plug and now it never gets hot.

you just saved our Sunday!!! Thank you Sir.

Water stopped - first video was this. Cleaned the connections and have water back, from video to fix 10 minutes. For anyone that doesn’t have a meter to test pump power, if you can, just shut off the mains.

1996 Suzuki 800 intruder. Clutch not working. Just took it out of garage. Was fine when I put it away. Has fluid won’t work. HELP

1996 Suzuki 800 intruder. Clutch not working. Just took it out of garage. Was fine when I put it away. Has fluid won’t work. HELP

Took my Suzuki 800 out of storage. Clutch won’t work. Has fluid. Just not working?

You can just bypass the protection switch if that's all that is bad

It ain't got no gas in it!

Thank you

Thank you. You made my day

I never saw the gator?

Your video isn’t worth a fuck… you take it too close to the bike… I can’t see where you’re putting the clamp in relation to the bike… this is the second video I’ve seen from you that is totally FUCKING WORTHLESS… you fucking hillbilly talking piece of shit…! If you would just pull the video back a little bit I could have a better sense of perspective.. But no…! Your sorry ass doesn’t think about that… you fucking imbecile…!! Thanks for nothing… you fucking maroon..!

If you look at the Beretta Neos. And the high standard Dura Matic. The back end of the slide is identical. Even though the high standard is a much older gun.

Thank you sir! I wired it correctly and I’m happy

Nice!!!

Not a "Fix" brother, it was replaced... big difference.. although, a new one was cheaper than rebuilding the old one ironically

Its better to solder the wire

Mine turns off after i push the shot button :-(

It’s easier to adjust it. Loosen 2 bolts p. One pivots and the other has a slot to move the shifter forward or backward. Easy peasy.

Dude, you have a great voice. Have you ever thought of doing professional voice overs ?

Do you have the link for a new battery?

Thank you for making and sharing video!

Same friend😂

When I did this, my fan also had a blue wire that still wasn’t connected and I was wondering if that was just the wire for the light or if it’s needed to be connected to something else

Happy sabbath everyone!! I came here because it wasn’t clicking and found out that one of the locked pins on top of it pop off… which is weird but I guess it can happen. I looked around but didn’t see until I came back and finally by the Grace of the good Lord I had eyes to see or He just give me another one! 😂 I’m guessing with all that vibration back in forth it just pops out. I pray that if anyone else sees this comment and has the same problem finds it and understands! Blessings to the most High!

thank you so much for doing this very helpful video.

Could you just wire the fan right into the plug without using wire nuts?

Thank you! So many of these people posting videos have zero knowledge!!

kzfaq.info/get/bejne/ZqyGftCQybWvmZ8.html

Could you tell me I have HP desktop computer. I had inserted a Cd in that space but when I go to remove that cd from the driver space. It doesn't seem to appear. Could you give me the solution please.

Nice tractor

thank you sir!