Do you need to have professional pro assistance package?
@saltkjelen5352 күн бұрын
Yes
@verynick2 күн бұрын
Darn. I don’t have it ugh
@leevinylcritic8 күн бұрын
have you done anything engine wise? a must upgrade to do for a diesel are AGR & DPF delete coded out and mapped, high flow cast exhaust manifold, straight pipe & back box delete, upgrade from the old tube filter to new style crankcase filter breather, upgrade a limited slipdiff, thën maybe go further with high flow injecters, bigger turbo so on and so forth.. should have gone with a 6 speed manual änd the m57 engines 530d or 535d, they are built like a tanks wïth stock internals just know there are limits for power gains until the stock parts will need upgrading.. but those blocks have made a 1000hp when built properly. oh and love what you have done with äll nice upgrads... must say it looks so much better dropped with the Alpinas... but then BBS's suite it to. hope tõ see more plus you have given me some great ideas for my E60 thanks..
@hazeemnabil34120 күн бұрын
is it PNP for the lci lights?
@saltkjelen53517 күн бұрын
Not at all. The pre 03/2005 cars is way more difficult too. You´ll have to rewire a new harness from the AHL module under the glove box and route it to the LCM. Then you have to do wiring jobs for head- and tail lights.
@tothemax072923 күн бұрын
Upload video with exhaust and motor sound?
@tothemax072923 күн бұрын
Is the same car from 3 years ago?
@saltkjelen53517 күн бұрын
No, this is a friends car. :)
@MarkiGuru2 ай бұрын
Did you retrofited?
@saltkjelen5352 ай бұрын
No, its OEM.
@MarkiGuru2 ай бұрын
What part did you used? Need some other wire to bdc? Or its can line? Just plug and code it?
@saltkjelen5352 ай бұрын
You can use FZD from G20/G30/G11/G05++. It requires coding and LIN-bus to BDC.
@MarkiGuruАй бұрын
@@saltkjelen535i would like ask you about BDC , can you explain where i have to put? Connector number and pin number? And did you coded manualy or added 6U8 option code and then did you calculated svt, thanks
@Ger0nimo763 ай бұрын
Just got brand-new i4 built in December 2023, and I was wondering why gesture control was not configurable...seems it's simply not installed 🙂
@saltkjelen5352 ай бұрын
Thats correct. BMW didn´t offer Gesture for the i4.
@Ger0nimo762 ай бұрын
@@saltkjelen535 Thank you!
@Rudolf2k3 ай бұрын
ABS still working with DSC OFF? Is DSC truly off?
@critical79154 ай бұрын
1:12 what is that ticking noise.
@osakamohammed36854 ай бұрын
wish these were in america
@frankhoffman69745 ай бұрын
Hey im trying to do this retrofit on a M440xi, My car is also a 2023, but i cant find a part number for the fdz module. Was wondering if you can push in the right direction.
@saltkjelen5352 ай бұрын
P/N depends of your equipments (sunroof, alarm, SOS etc.)
@joehamilton97965 ай бұрын
Which led corona ring bulbs are they ? I haave the same headlights with led bulbs fitted but look very dulll during the day only look good at night yet all these new bmws 2016+ have nice crisp white led rings for DRL .. 🙂
@saltkjelen5355 ай бұрын
Hi, sorry, its too many years since i bought them. Unfortunately, I can´t find the link anymore.
@saykhan20045 ай бұрын
Hans doesn't know sh•t about cars, and that's the reality!
@dennis8856005 ай бұрын
I've heard this sound irl and it's really nice. Very raspy and fitting to the car. Doesn't sound like an engine but it doesn't need to. And yes, I do prefer the v8 sound of my own car
@kaskas254820 күн бұрын
And you don’t know shit about sound design so why are you talking?
@noisy51095 ай бұрын
How reliable is this car? Looks epic! :)
@saltkjelen5355 ай бұрын
No faults so far after 3,5 years ownership. Just normal maintenance. :)
@Strmi5 ай бұрын
This is awesome
@saltkjelen5355 ай бұрын
Thanks! :)
@techwhizard6 ай бұрын
What benefit does this coding provides if my car already has drive assistant professional and lane change assistant enabled from factory?
@riCoger5 ай бұрын
At least in Germany, lane change assistant is deactivated due to legal reasons (counts as autonomous driving).
@skayofox7 ай бұрын
Reminder to all of you with iDrive 8.5: It's currently not possible to code this, because you can't access the HU-MGU for coding. Very sad!
@saltkjelen5357 ай бұрын
Yes, thats correct. Indeed, its very sad.
@muazzamarmar747 ай бұрын
Would really like to know part number for these stalks as I cannot find this one anywhere at all, would be of great help
@saltkjelen5357 ай бұрын
It depends of your cars equipement (steering wheel heating, high beam assist etc.).
@coalieroller56637 ай бұрын
where do you get the idrive controller surrounding in wood?
@KujezZi7 ай бұрын
Hello good sir, would you happen to have a moment to talk about your previous E60 build and if so what would be the best way to contact you? I've been pondering this for a quite a while now and maybe you could possibly help me with my question.
Hey I just got a bmw i4 m50 last week and I can’t find how to turn this on, can someone help?
@saltkjelen5358 ай бұрын
Do you have iDrive 8 or iDrive 8.5?
@pe4cem4ker188 ай бұрын
@@saltkjelen535 I’m sorry i don’t know what that means I’m still trying to familiarize myself with the car, what does iDrive 8 and 8.5 mean?
@saltkjelen5358 ай бұрын
@@pe4cem4ker18 Its the iDrive version. It can be coded if you have iDrive 8, but iDrive 8.5 is covered by secure coding at the moment. Just google to see what version you have.
@T.19638 ай бұрын
How did you make this possible? It cool to have
@saltkjelen5358 ай бұрын
You´ll have to buy new FZD with Gesture Control option, make some wires and coding.
@getyoursupervisor85195 ай бұрын
@@saltkjelen535 what would be the rough costs ? Could any Beemer shop do this ?
@saltkjelen5355 ай бұрын
I paid 190$ for a used FZD and 15-20$ for some connectors and wires. I did the coding by myself as I retrofits a lot of things like this. I guess your local BMW dealer would said thats not possible, but "retrofitters" around the world would be more than happy to help you. :) I can do it for you if you are loacted in Norway, nearby Oslo.@@getyoursupervisor8519
@getyoursupervisor85195 ай бұрын
@@saltkjelen535 Thank you very much for the effort to answer, very kind. Unfortunately I´m not a Norwegian (I love your country, btw, so beautiful, have visited Oslo, Torp, Bergen, Trömso, Skien, Mo I Rana and Stavanger) but from Central Europe. There is guys in Germany close to were I live that do coding, but they do not offer this retrofit...
@christiandolcini67468 ай бұрын
very very good job.... thats great man
@saltkjelen5358 ай бұрын
Thanks! :)
@big-g68 ай бұрын
Buzzing for mine to arrive man
@saltkjelen5358 ай бұрын
The car is amazing! You should rejoice.
@schapdabat67189 ай бұрын
How did you code this? I looked it up in bimmercode and couldn’t find it.
@aksionpc9 ай бұрын
Mine has stage 2 500hp with 1002nm
@saltkjelen5359 ай бұрын
Good for you! 👌🏻
@aksionpc9 ай бұрын
@@saltkjelen535 yea, think you need a new tuner if that is stage 2 😂
@saltkjelen5359 ай бұрын
I dont think so. Mosselman is high quality and as mentioned before; they offer "stage 1" tuning box, "stage 2" ECU flash, "stage 3" something like you have and "stage 4" ECU, DPF delete++. @@aksionpc I clearly know that I can get more power with other tuning, but that was not that I was looking for.
@aksionpc9 ай бұрын
Ahh ok, but sstage 2 is what i have in my 2014 LCI 550D, not stage 3 @@saltkjelen535
@madslundgaard66256 ай бұрын
2014 Is not an LCI F10/11. 🙂@@aksionpc
@michaelgourski35469 ай бұрын
⁉️
@saltkjelen5359 ай бұрын
?
@xsavier79849 ай бұрын
is the sound similar to mine I think the drive shaft is broken kzfaq.infoOMEYjc2G0do?si=pBT0J3LbqoaFrWZU
@T.19639 ай бұрын
Will this also work with the standard drving assistant package and the extra radar for the adaptive cruise control?
@saltkjelen5359 ай бұрын
Unfortunately, this will only work for cars equipped with Driving Assistant Professional Package (DAPP).
@robindouglas30349 ай бұрын
Shit i need an e60 lci again in my life, mine had style 101’s on as well, and was titansilber, almost identical to yours.
@saltkjelen5359 ай бұрын
Thanks! E60 is such a great car. Ahead of its time. :)
@mrhamburch10 ай бұрын
Look like you take Seats from an other M Car. Looks really nice 👍🏼
@saltkjelen53510 ай бұрын
Thanks. Thats correct - its ventilated seats from X3 M. They are being reupholstedered to tartufo as we speak.
@arnylukacs48810 ай бұрын
the amount of work put in this is amazing 😮
@xxlikeicarexx10 ай бұрын
Where did you get all the parts from? I struggled to even get my mirrors replaced which where a bit crusty. Had to order them from the other side of the world. Cant even get M Performance Grills these days. BMW almost has nothing in stock left for the E60.
@saltkjelen53510 ай бұрын
Its many years ago, but i bought parts new and used. I think the best thing is to look on scrap yards etc. :)
@xxlikeicarexx10 ай бұрын
@@saltkjelen535 Thanks for the hint, sadly no scrapyards near me. Awesome build tho!
@Gordon10010 ай бұрын
That's cool! Was the wiring hard to do?
@saltkjelen53510 ай бұрын
No, I made the wiring by my self. It took an hour to do.
@user-ls2yd8ip5e10 ай бұрын
Well done! I like to retrofit passenger memory seat. Can You tel me how to code? Is the cable behind the doorpanel?
@saltkjelen53510 ай бұрын
Hi, You have to make wiring harness and coding the seat module and BDC.
@chriscuthbert-scott25310 ай бұрын
Why didn’t you just buy a 2008 Msport?
@saltkjelen53510 ай бұрын
Why buy a E60 2008 M-sport when you can buy a E60 2010 M-sport instead?
@chriscuthbert-scott25310 ай бұрын
@@saltkjelen535 funny that’s exactly what I own ! (But I said ‘08 as that’s when the LCI came in)
@saltkjelen53510 ай бұрын
@@chriscuthbert-scott253 no, the LCI was introduced 03/2007 as MY2007. ;)
@chriscuthbert-scott25310 ай бұрын
@@saltkjelen535 what a winner! Should I edit my comment to “why didn’t you just buy a 2/07 LCI “
@saltkjelen53510 ай бұрын
No, because I can’t see the point about your comment. I had that car at that time, so therefore I didn’t have an another car. I have an 2015 M550d at the moment. Why isn’t that car a MY2016? Or MY2017? And my 2024 i4 M50, why isn’t that a MY2021 or MY2089?
@nathannichols730610 ай бұрын
And? My grocery getting Kia does this 😂
@saltkjelen53510 ай бұрын
The passenger memory seat button has never been a thing for 4-series and down on BMWs, but i´m just glad i´m not driving a Kia. ;)
@user-ls2yd8ip5e10 ай бұрын
I would like to receive the coding rules so that I can also activate lane change assist on my BMW I4. Is that possible?
@saltkjelen53510 ай бұрын
HU-MGU -> Spurwechselassistant from nicht_active to werte_01/gen_01, BDC, PFSarahMaster, Spurwechselassistant from nicht_active to active, SAS3 -> Spurwechselassistant from nich_active to werte_01/gen_01. :)
@user-ls2yd8ip5e10 ай бұрын
@@saltkjelen535 Thank You it works also for my car
@saltkjelen53510 ай бұрын
@@user-ls2yd8ip5e Glad to hear it works for your car too! :)
@Balkan19848 ай бұрын
I've been using Bimmercode to code my BMW I4. I can access HU-MGU (Heads up Unit) and BDC3 (Body Domain Controller), but not SAS3 it would seem. Did you use a different software to do the coding on your I4?@@saltkjelen535
@vincentchen27407 ай бұрын
I’m using esys, Inside SAS3 under CAFD_000042C1, I can only see parameters like 3000, 3001, 3004 by Edit NCD. I wonder how to find Spurwechafssistant? Under which category, thanks!
@milan223011 ай бұрын
hi, how did you retrofit hud? thanks :) did u also replace the windshield with the hud version
@saltkjelen53511 ай бұрын
You have to replace (or cut) in the dashboard, HUD, some wirings, screews, nuts, new windshield and new RSL (it depends, sometime your RLS supports HUD).
@Aizman87 Жыл бұрын
F11 is such a beautiful car😍
@omarzowila Жыл бұрын
For me, I am trying to modify my car on a budget and it has to be below what my car’s worth in good condition with the amount of miles it has on it
@jonathanshemesh8043 Жыл бұрын
You are one of the only people I could find online who have made this conversion! I hate the new style stalks on my G30. Could you shine some light on what parts you ordered, the coding involved, etc? I'm looking to do this sooner than later.
@saltkjelen53510 ай бұрын
Sorry for late answer. Do you still need help for this retrofit?
@i_mixr8 ай бұрын
@@saltkjelen535I’m curious since I’m shopping for a G20 and I do absolutely love the ones on my E92. And it is an absolute bummer to lose that one wipe function while maintaining auto wipers.
@saltkjelen5358 ай бұрын
@@i_mixr Buy stalks from G11 7-series (2015-2016). Then coding is necessary.
@i_mixr8 ай бұрын
@@saltkjelen535 thank you very much! I’ll research the coding required.
@Aizman87 Жыл бұрын
This generation 5 series is is just the most beautiful in the entire industry🎉 Especially the M550d!
@norekpotworek Жыл бұрын
A very beautiful movie and super modification 👍
@BeachyBirdMusic Жыл бұрын
BUTIFUL
@TwitchStiffDylan Жыл бұрын
Where did you buy the m body kit
@saltkjelen535 Жыл бұрын
It was bought at my local BMW dealer
@NuLAlfs Жыл бұрын
Isnt this xdrive tho? Hes spinning all 4 wheels when u started him
@saltkjelen535 Жыл бұрын
Yes, its xDrive. The DSC was off.
@nurousek123 Жыл бұрын
Hello SaltkjelenBMW! I had some questions, can I have a contact to you? Thanks.