When I turn my lightbar on it will only light up red. The app won't work and the remote don't work! We bought another bluetooth module and it only worked for about a month now Aerolidz is on a "break" and won't answer any questions or help anymore! :'(
@tammyhelton8818Ай бұрын
When I turn my lightbar on it will only light up red. The app won't work and the remote don't work! We bought another bluetooth module and it only worked for about a month now Aerolidz is on a "break" and won't answer any questions or help anymore! :'(
@tammyhelton8818Ай бұрын
When I turn my lightbar on it will only light up red. The app won't work and the remote don't work! We bought another bluetooth module and it only worked for about a month now Aerolidz is on a "break" and won't answer any questions or help anymore! :'(
@tammyliscio3 ай бұрын
I accidentally ordered one for a 3inch tall light bar and mines 4 😭
@jeremywade23897 ай бұрын
Any troubleshooting when a light bar won’t turn on any longer?
@sdkinc8 ай бұрын
Can't buy the cover anywhere
@annieadventure9 ай бұрын
When would they be available?? I've been wanting one.
@rebeccaadams419 Жыл бұрын
I just stalled mine I have a dual light bar I don't know the brand but my aerolid doesn't close all the way in the back.
@glenngiles5169 Жыл бұрын
I bought one for my gladiator. What a difference!!!! Thanks
@jhootman44 Жыл бұрын
What app is used for these lights?
@spurgeon71 Жыл бұрын
Seen you guys at smoky mtn Jeep invasion and have been wanting one ever since.
@stevemiller42372 жыл бұрын
I only hand wash my Wrangler. Afraid of damage and also soap gets caught in all the nooks and crannies.
@therusticcollectionebaysto70282 жыл бұрын
New sub! Liked 🙏😀✌️🙂
@maxc3152 жыл бұрын
My light bar is 2.96 tall and 2.48 in deep. Would I be better off with a single row cover or a dual row? I purchased a dual cover and it just seems too big it's tight but if I move it around it'll spin should I get the single row one?
@aerolidz96992 жыл бұрын
Sounds like you have one of those light bars that have no back side to it they are not a good fit for our covers the single row wouldn’t be any better. aeroxindustries.com/pages/how-to-fit-light-bar-covers
@bobbyreno45752 жыл бұрын
So we got an insert but it stuck to the Silencer how do you remove without destroying the insert
@johntrinidad40912 жыл бұрын
Hi, when are you gonna make for 52 inch curved light bar?
@kourtneehall79863 жыл бұрын
I also have a light controller…do you wire the power and the switch together or how does that work?
@johnlafferty91012 жыл бұрын
You cut the switch off and connect the 2 wires together then connect the power wire from the battery to your switch controller
@noemigalaz52533 жыл бұрын
When are curved bars covers comming?
@cosmicgue3 жыл бұрын
I currently have a Nilight 52" 3 row light bar will this cover work with my 3 row light bar?
@josephromero15963 жыл бұрын
6k views and only 30 likes? People are just rude
@eltio213 жыл бұрын
Whats the name of the app?
@krismorrell46402 жыл бұрын
Anybody ever find this out?
@josedemayo10222 жыл бұрын
Look at my reply above (took me a while to find it)
@adanbautista363 жыл бұрын
I have. a 52” curve light bar Will it fit on
@pablosalinas47753 жыл бұрын
Sooo I’m trying to put this kind of LED bars under the semi for underglow , mainly for the RGB since all other options like Rock PODs and LED strips can’t handle the road conditions thrown at it. I wonder if there’s an option to get the white lights to also turn in colors instead of just the halo strip. Any info on that?
@Guillotines_For_Globalists10 ай бұрын
You should just look in to RGB rock lights - they're durable and meant to take those harsh environmental elements beneath the vehicle.
@hannahmullins94833 жыл бұрын
So what’s the app called
@shemekadavis873 жыл бұрын
Just broke my windshield car wash is paying for it never again
@rneerpat3 жыл бұрын
what is the insert made of
@evanspiewakowski50073 жыл бұрын
What kind of lights are those?
@Timcanniff3113 жыл бұрын
The idea seems good but looks funky
@newyorkers303 жыл бұрын
Who does the paper ?
@skiddy29743 жыл бұрын
Is there a video on how you cut and lowered your light bar brackets? I can't find one...Great tips btw...
@johnnykincaid25473 жыл бұрын
I tried baffles and RTV first and it didn't help much. The o is doing great so far.
@AndrewFornal4 жыл бұрын
Be very careful about ordering on AMAZON. I ordered what I thought was a Lightbar cover but instead received a "INSERT" - I Love the insert - however the description of the product is VERY Misleading.
@buckan8r9994 жыл бұрын
I just bought and installed this for my DV8 single 50” light bar. the whistling went away, but the humming is still there.
@RandiHickman444 жыл бұрын
That car wash is not an accurate representation of car washes that exist out there. The local one that I go through has a rotary beater, that ended up tearing my very similar light bar right off of the mounting bracket and then slammed and dragged it across the hood of my Jeep. I have had to make it removable with hand clamps and a water proof connector to prevent it from happening again. The car wash refuses to pay for all of the damage to the hood of my Jeep.
@aerolidz96994 жыл бұрын
Randi Hickman the number one thing you did wrong is you mounted your light in the slots I’m assuming. Those slots are not intended for both sides to be bolted there. You need to use the bolt holes. If your mounts don’t have bolt holes drill some or get different mounts.
@ryanbishop19875 жыл бұрын
I put mine on today and it has a slight bit of movement. It doesnt seem to clamp as tightly as this one you're demonstrating. Is some movement normal?
@aerolidz96995 жыл бұрын
Wrangler Roundup it may have some play but to much. If it rattles going fast you may need to place some rubber traction pads on top your bar to give it some grip.
@SOS_Recon5 жыл бұрын
Making me think again about a flat light bar on my JK. Glad Jared and Grace told us about you!
@prestonwilliamson70425 жыл бұрын
Any plans to make them for the curved light bars?
@aerolidz96995 жыл бұрын
Preston Williamson yes absolutely!!! Hoping to roll it out For SEMA
@Patchesgnzandknives5 жыл бұрын
Definitely going to look into one of these when I do my overhead light bar. Do you think I would need one of these for my 20 inch light bar? I plan to mount it the same place as yours on the hood or on a bull bar over my winch.
@richardgarcia30165 жыл бұрын
What an amazing idea! Shout to Crawl tv for the heads up about these!
@aerolidz96995 жыл бұрын
Richard Garcia Thank you!!!
@colet76455 жыл бұрын
When is the soonest we could expect a 52" curved to be available for sale? I have done everything on my install to kill the noise and vibration, and even when covered I get the whistle. This product really does come off as holy grail. I can paint/tape the interior to fend off glare, cut out resonance, and serve as a cover.
@aerolidz96995 жыл бұрын
Cole T SEMA 2019
@alexareynoso61545 жыл бұрын
Yeah I just bought mine and went to school came out of class and Less then an hour it got stolen!!! At school.. it’s way to easy to take off . I loved it totally works but mine got stolen!! So much for my “wrangler letters “ Nd cover !!😭
@alxmjohnson5 жыл бұрын
Does this sufficiently cut down on the wind noise as well?
@aerolidz96995 жыл бұрын
Yes big time! You’ll take it back to almost stock depending on how windy it is.
@alxmjohnson5 жыл бұрын
Does your company provide over night shipping option?
@aerolidz96995 жыл бұрын
alxmjohnson yes on the website at check out
@alxmjohnson5 жыл бұрын
Thank you! I ordered the below items on the website and selected the fastest delivery option. I hope it makes it to me in time. If you know anyone at the company, I would appreciate it if you could put in a good word to ensure my items get shipped expeditiously. AeroLidz - 50” 52” - Smoked - Dual Straight High Grade UV Poly-carbonate Light Bar Silencer 52 inch long RED WRANGLER insert
@johncinsip6 жыл бұрын
Thanks for the info. i’ll give it a shot if my method of running 2 strips of electrical tape stops working.
@ashgrove076 жыл бұрын
It’s a great product, but it’s too expensive for over $120+ and then you have to worry about some douchebag stealing it 🤷♂️
@aerolidz96996 жыл бұрын
ashgrove07 premium products come at a premium price
@ashgrove076 жыл бұрын
Just bought one for the wife , Because I know that wind noise would bother her.
@nickfd176 жыл бұрын
How does this for both 50 in and 52 inch light bars?
@TRSMINI6 жыл бұрын
I think it comes in one size and you have to cut it down to fit shorter lightbars.
@aerolidz96992 жыл бұрын
Hi there, we offer light bars and covers in a number of sizes and options. Our most popular covers we sell are in the 52" or 50" range (since those are the noisiest) the designs have some versatility. Our covers work on a number of light bars from brands other than our own, so yes in some instances customers decide to cut them down.