What’s the last name of Greg from Turner mentioned around 32:50? I’ve got a project with Turner right now that could stand to have some outside eyes for their QC work.
@windowwiz100Ай бұрын
People like Eliot and AJ who were installing windows in the 40’s 😂
@enerjohnsavior3227Ай бұрын
So air leakage and thermal bridging are the main problems Helen Sanders sees in curtain walls. And from 33:00 - 36:00: We are going to coin a term right now, and that term is Thermal Chic!
@mullertechnologies87462 ай бұрын
very good explanation of the pros of Rolled Thermal Break, thank you!
@adelina75202 ай бұрын
"Promo sm" 😔
@nithinmohanan56982 ай бұрын
That's brilliant Adrian! Thanks for sharing 👍 Just tried this at home, and I seem to have a slight tint on the outer most Surface 1 😅 So can likely expect coating/film deterioration over time due to the extreme heat we have here!
@srulyp.74283 ай бұрын
Which companies offer this?
@BrendanWeibrecht3 ай бұрын
I have so many questions. What is low-e? Why does it matter? What does IGU mean? VE2M? Does 'number 2 surface' mean the backside of the front pane? A closeup would be good to demonstrate the difference Edit: Just noticed 'insulating glass unit' in the description
@nithinmohanan56982 ай бұрын
Hey Brendan. Low-e stands for low emissivity, which basically means it is a coating that limits the amount of solar radiation that passes through the glass. Thus keeping the heat out. And yes, Surface 2 is the back of the front external pane.
@enerjohnsavior32273 ай бұрын
So great to get a peek into the world of talented professionals doing large building rehab in NYC!
@KeithTripp-zo5ty3 ай бұрын
Weep hole deficiencies are unfortunately common in residential construction here in the Greater Toronto Area.
@nicholascolello31583 ай бұрын
Great interview that I found informative.
@cesarsantellana17683 ай бұрын
What type of wheel is recommended for low e edge deleting? Is it similar to a de burring wheel?
@aminkianafraz3 ай бұрын
👋👋👋
@aminkianafraz4 ай бұрын
Hello Adrian, I hope you are well, thank you very much for sharing your point, would you please explain more about the minimum radius and glass thickness, I think that number you mentioned is more. of course, it depends on the manufacturer's devices.
@sasanne73134 ай бұрын
Cocaine
@AD-xx4rm4 ай бұрын
Dope. I’ve seen enough birds fly stunned after a dramatic crash into glass.
@enerjohnsavior32274 ай бұрын
New construction staff position: "Air Boss."
@enerjohnsavior32274 ай бұрын
Great convo! So much to learn about fenestration.
@wojciechturek16014 ай бұрын
Is there no risk for delaminating because of potential heat buildup?
@EmilianoDellOro-ko6ik4 ай бұрын
Very interesting and well explained detail overview, thank you for sharing this insight.
@jofri06264 ай бұрын
Agree!!
@TheTreehouseFamily5 ай бұрын
where did you get those threaded bolts?
@wojciechturek16015 ай бұрын
Could you please mute the music background? 😉
@enerjohnsavior32275 ай бұрын
Yes, it's great to pair up Passive building certification with a broader green building certification program. Did you know that the Phius conference this year is going to be within the USGBC's Greenbuild conference? Also, great to hear those insights on large building air tightness QA/QC!
@enerjohnsavior32275 ай бұрын
Agree with Sameer 100%. One great thing about being in architect who specializes in building enclosure technical issues is that our amount of time per project is smaller than a generalist architect who has to oversee all aspects of design thru construction administration, so we get to see a lot more projects, and our learning is accelerated. We can bring our expertise to other architects and add a lot of value based on things we have seen in other projects.
@alexboros17516 ай бұрын
I still not sure wat you mean by inset Does that mean on the slab so it's structural? Yes?
@anandbchavan6 ай бұрын
Simple and to the point 👍
@gokhang.48886 ай бұрын
How much mandrel pulls back into sleeve after it torqued? Is it possible to say something average like .25 or fully engage
@lifecanvasmedia6 ай бұрын
Hi Adrian, As always, another educational video. Just an added comment on the epoxy anchor bolt - it is essential to clean up the the pre-drilled hole prior to applying the chemicals for good bonding! Rgrds, Nayan
@industrialvz6 ай бұрын
Depends on structural calculation !
@enerjohnsavior32276 ай бұрын
34:25
@enerjohnsavior32276 ай бұрын
How about I-beams that are 2" thick penetrating the envelope and going out, say, 50 feet - will 3" thick mineral wool wrapping the beams for the first 3 feet out from the exterior wall prevent condensation on the beams indoors? On 2" thick steel? Trying to escalate discussing that risk on a project right now.
@PabloHitmon6 ай бұрын
Are you okay? You seem like your very hot.
@pubgverse32336 ай бұрын
Very tough to understand Try explaining in more easy language
@wojciechturek16016 ай бұрын
Detail is probably incorrect due to risk of thermal bridging at sealant area Normally you see insulation in line with glass to prevent from such a scenario however I guess design fallows architectural design that could be wrong too unless there are other reasons I cannot see from this one detail Thanks for the content 👍🏻
@iaiantapleb7 ай бұрын
4) One other important function of secondary sealant is to effectively share the structural loads between the outer and inner panes. The bite, thickness and its ratio must be properly designed and calculated. Sidenote: The place where the IGU was manufactured vs where it will be installed (climate, barometric pressure) affects the cavity loading as well. This is a very informative video. Thanks!
@briancardena86177 ай бұрын
Thanks for the contribution Adrian. What is the bibliography that you use to study everything related to dvh or the one you use in this video? greetings from Argentina
@anandbchavan7 ай бұрын
Great information. Can you please update which notes or book which you refer in this video for sealant joints. Thanks 🙏🇮🇳
@industrialvz7 ай бұрын
And the newest is the polyamide chambers fulfilled with polyurethane foam for even better insulation !
@AdrianLowensteinPE7 ай бұрын
yes!
@wojciechturek16017 ай бұрын
Not understanding last two when you can fill the void using foam the only thing in uk the preference is to not to use combustible insulation so that would have to be something like shaped mineral wool or it’s none combustible equivalent Anyway thanks for allowing comments under your movies I’d like to see more talks here and on LinkedIn 👍🏻👍🏻👍🏻
@robertweeks42407 ай бұрын
great video great information shared.. this is rob from cleveland and jamieson ricca... i was your 11th "like" keep up the great work
@Omar-Ahmer7 ай бұрын
I couldn’t recognize what does “chicken head” terminology means With thanks to you and Eugene
@Omar-Ahmer8 ай бұрын
OMG! Feeling lost with Scott ! , i need to replay it many times