Thank you so much 🫶

Thank you so much for your kind words! 💖

Thank you! Glad you like it 🥰

Thanks Michael! 😃

When removing adhesive films from wooden surfaces, it's generally safe and shouldn't cause any damage to the wood underneath 😊

Thank you so much! We're thrilled you love the new Training Academy. Our team put a lot of heart and effort into making it a special place for everyone. Your support means the world to us! ❤️

Thank you for sharing your thoughts! Time indeed reveals the impact and acceptance of trends. We believe Pantone Peach Fuzz, along with Cover Styl, offers a fresh and vibrant perspective for 2024. We're excited to see how it influences design aesthetics. Let's revisit this conversation in the future and see the transformations unfold!

Thank you! We're so glad you enjoyed the video. Stay tuned for more content like this. Your support means everything to us! 🌟

Yes, it's essential to remove any old vinyl wrap before applying a new Cover Styl vinyl. This ensures that the new adhesive film adheres properly and smoothly, providing a flawless finish. Removing the old wrap also helps to prevent any bubbling or uneven textures that could occur from layering the products. If you need tips or guidance on how to remove the old vinyl safely, feel free to reach out!

@coverstyl9401 Thank you 😊

Yes, our Cover Styl products are designed to be heat and steam resistant, making them ideal for various environments, including kitchens and bathrooms. They can withstand everyday exposure to heat and steam, ensuring durability and maintaining their appearance over time. However, we recommend avoiding direct exposure to open flames or extremely high temperatures. For specific temperature ranges and care instructions, feel free to reach out or check our product specifications!

Hi, thanks for your interest! Before installing the wrap to ensure the surface is flat and smooth, we install plates. The choice of material depends on whether the area of installation is humid or not. The options include: ➡️ Di-bond/Alubond/Eurobond ➡️ Marine wood ➡️ Komacel ➡️ Forex or acrylic plate Each of these materials is selected for its ability to provide a perfectly even surface, crucial for the optimal application of the film.

@@coverstyl9401 just got your swatch from William Smith. Some beautiful options!

Thank you for your comment! We're thrilled that you found our tutorial on table wrapping with Cover Styl adhesive films helpful. If you have any questions or need further advice, please don't hesitate to reach out. Stay tuned for more tips and inspiration! 😀

Absolutely, you've touched on an important aspect! When installing panels, it's recommended to overlap them slightly. This technique ensures a more seamless and flush appearance, reducing any potential issues with unevenness. Plus, the overlap method enhances the overall durability of the installation. If you need more detailed guidance or have any other questions, feel free to reach out! We're here to help make your project a success 😃

Thanks for replying. I can't quite imagine it though! Would there not be a raised line where the overlap is, which would collect dirt and debris? Is a heat gun used to fuse it together or?

Yes, dirt and debris can accumulate at the overlap point, but the cleaning process is super easy, and nothing remains in that area if you clean it properly. Here, a heat gun is not used to fuse the two parts together. In case it's necessary, a butt joints technique can also be used.

Thank you so much for your kind words! We're glad you found the idea and advice helpful. Requesting a sample is a great step - it'll give you a better sense of how the colors will look in person. We hope the sample helps you make the perfect choice for your project! If you have any more questions or need further assistance, feel free to ask. Happy decorating! 😃

Thank you for your interest! To connect with our official distributor and installers in the UK, please complete our contact form. Once submitted, we will redirect you to our trusted partner, William Smith Group, who will be happy to assist you further. Here's the link to our contact form: bit.ly/3Lagocr If you have any specific questions or need assistance during the process, feel free to let us know. We look forward to serving you! 😊

Thank you! 😊

Sure! You can fill out our contact form on our website through the following link, and we will connect you with an installer near you 😊 bit.ly/3Jxkpa4

Thank you so much, we're glad you like it! 🥰

Thank you so much for the compliment! In this particular case, the inside wasn't wrapped, but it's definitely possible to do so. Cover Styl products are versatile enough to be applied on both exterior and interior surfaces, allowing for a complete transformation if desired. If you're interested in wrapping the interior for a cohesive look, we can guide you through the process or provide more information on how to achieve it. Just let us know how we can assist you further!

In case of a bubble during the application of a decorative film, you can try lifting the film where the bubble is located (if it is on a laminated surface, tile, etc.). You can also make a small hole in the bubble and gently heat that area.

It sounds like you might be experiencing some challenges with application. Don't worry, bubbles and wrinkles can often be smoothed out! Here are a few tips: - Use a squeegee: Gently push the bubbles towards the edge of the film. This can help expel trapped air and smooth out wrinkles. - Heat gently: A low setting on a hairdryer can soften the film slightly, making it easier to stretch and reposition for a smoother finish. - Puncture small bubbles: If there are persistent small bubbles, you can carefully prick them with a fine needle and then smooth down the area. - Patience and practice: Sometimes, a bit of patience and practice is all it takes. Don't hesitate to lift the film and reapply if needed. If the issue persists or you're looking for more guidance, we're here to help. Our team can provide detailed advice or recommend a professional installer for a flawless finish!

We recommend watching this video on the tools needed for the installation of adhesive films: kzfaq.info/get/bejne/a5N8jciasMzUeWQ.htmlsi=uI7glgc_YtRAzlGi

It is entirely possible to remove a Cover Styl film safely if applied to a laminated surface. However, if applied to wallpaper, paint, or drywall, for example, your original surface may be damaged.

Glad you like it! 😍

The approach of wrapping only the front and back of the cabinets, excluding the sides, is a valid technique. However, it's important to exercise precision during the cutting process, ensuring there are no slight overhangs. If there's any excess material left, it could lead to issues like peeling, especially when cleaning with a cloth. Therefore, meticulous attention to detail in the cutting phase is essential to maintain the longevity and appearance of the wrap.

@@coverstyl9401 thanks! In retrospect, I should've ordered a wider wrap and just gone over the sides as one piece. But it came out much better when I started using the techniques in your video, especially for the corners. Appreciate you!

@@coverstyl9401 just to clarify: I ended up adding seperate sides to the 3 doors that I had cut to front and back only, without overlapping. The remaining doors I wrapped overlapping the sides as shown in your video, and they came out much better! I'll use that technique if I do this again. The overlap technique also made the frames come out much smoother, cutting individual pieces for each flat surface of the frames (there was a fridge box involved) i had trouble cutting the corners completely cleanly

Matte surfaces generally show fewer fingerprints than glossy ones. The matte finish has a texture that better conceals marks and fingerprints, making it an ideal choice if you're concerned about this aspect. By opting for a matte finish, you should be able to enjoy a cleaner appearance that resists fingerprints and dirt more compared to a glossy finish. I hope this helps you make your decision! ☺

@@coverstyl9401 thanks, this was helpful.

It’s harder to clean the prints of a Matt finish

We used Cover Styl adhesive films to renovate this kitchen. The references are in the description 🙂

@@coverstyl9401What was the paint or material for the gloss look?

Thank you so much for your kind words! We really appreciate your support. It's always encouraging to hear positive feedback 🥰