What kind of screwdriver is needed to remove the backplate?
@terryterry16556 ай бұрын
Reason if cant turn on machine?
@terryterry16556 ай бұрын
Power plug and rocket switch seemed ok
@grvsays6 ай бұрын
Can a stove be attached to the output of LPG converter and get a flame when the ignition is turned on ?
@ProBeuno6 ай бұрын
You need to have the engine running or the electrovalves will be closed. If you put 12V on the valves it might work until the evaporator freezes.
@makantahi37315 ай бұрын
why?, just buy old lpg tank and remove pipe from inside and it will act as gas bottle
@naderebrahimi99058 ай бұрын
Hi, I have an DELONGHI ECAM, I fixed the clogged tubes but when i take the infuser out and clean and placed it back, the machine keep displaying "INSERT THE INFUSER ASSEMBLY" and no matter what i do, machine keep displaying the same message. Any idea why??
@ProBeuno8 ай бұрын
This is exactly what my issue was. Look for play on the infuser carriage. If there is play, disassemble machine and tighten spindle nut
@BaikalLV10 ай бұрын
Thanks for the video
@bigaudimaster10 ай бұрын
I a sharing audi restoration videos. My car needs LPG system renewment. Thanks for helpful videos. Thanks too much.
@SamuelIndyer Жыл бұрын
I'm interested in importing the parts for conversion of my 2003 Toyota corolla. Can you help with the parts required? Thanks
@holitic7535 Жыл бұрын
That may cause cracks on the cylinders direct injection method
@daniellemeeks3862 Жыл бұрын
Does these systems have a flame arrester?
@makantahi37315 ай бұрын
what?, it is not jet engine with afterburner
@scorpion1982a Жыл бұрын
Zaczepy od wyświetlacza pięknie uszkodzone. W życiu dołem wyświetlacz się nie będzie trzymał. Wyświetlacz odchyla się i przesuwa do góry. Ludzie nie uczcie się od tego Pana !
@DrMary32 Жыл бұрын
Hi! I have same machine but the issue might be different, it doesn’t respond to commands, if is plugged in, is playing alone: switching on and off, water comes out and in the end I cannot make any coffee as buttons are not responding to orders. What that might be? Thank you!
@themba5791 Жыл бұрын
Better explanation. 👍🏼
@ericscaillet2232 Жыл бұрын
here is a dumb question -can one use natural gas used for cooking etc [ methanes?] instead of lpg,thinking of adapting the filling nozzle to be able to fill from tank from hardware shop....
@makantahi37315 ай бұрын
yes but pressure must stay in range for lpg so you can fill tantkonly up to 20 bars
@troy6882 Жыл бұрын
If your still around got a old ford on fuels and a gastec LPG had to replace the fuel tank due to contamination the sender unit was stuck half way and the positive was on the resistance line always half way since I disconnected and accident had on two occasions the system on in on position the gas was leaking from the pump since the fuel pump was not hooked in once replaced the gas relay is working after saturated and turned to off still runs fuels or gas and you can switch via the switch added gas line set??. enquiry on why!.
@hubertbarrantes4604 Жыл бұрын
Hello. I cannot remove the transmission before the infuser is stuck and I cannot manually remove it. Is there a way to still remove transmission?
@tomasp3394 Жыл бұрын
Sounds like a sensor (more like a switch pressed by infuser carriage moving too far along its axis of travel) is not triggering. I simulated this behavior while troubleshooting my ECAM which had trouble with sensor counting rotations and refusing to work after self diagnosis cycle.
@hubertbarrantes4604 Жыл бұрын
Hello. We’re you able to fix that issue? Mine makes a bad noise then it says general alarm. Troubleshooting says upper and lower switch on transmition need replacing
@autotechnicianke-charles4113 Жыл бұрын
I am an expert in LPG conversion,any job?
@stanley13729 Жыл бұрын
Delonghi est vraiment trop fragile , trop d'entretien!
@jeane38092 жыл бұрын
good share
@Bagan952 жыл бұрын
Thank you for the video! I have problem with milk not working/frothing or sucking into the plastic straw. The water seems to be working fine from the water sprout, and do get hot. I got no continuity though, on one of the two white temperatures sensors 318C, that you showed in the video 5:44 timeline. Anyway I’ve ordered a new one of those. Sadly, could not find the exact one to match my model number. It looks the same, so I hope it works. Question: I can not find the exact solenoid valve that match with the one I have. The numbers varies between 5301VN10P46AIX and mine 5301VN27P50APX. Are they working differently or is it fine buying even when different number? Both for Delonghi of course. I wonder if it’s possible to order a similar one but not the exact correct model number. Do you know if it will work with a different one or you know where I can find the exact one? Gear I have: Machine - ECAM23.460.B Solenoid Valve (top one, no sound/hummeling) - 5301VN27P50APX Thermostat - 467E // Tf 318C // 155431078N Thank you a lot.
@mohamedmuhumed8212 жыл бұрын
Fuel and lpg which one has more cunsaption
@TheBeso19942 жыл бұрын
LPG but depends on car.
@makantahi37315 ай бұрын
lpg is fuel, petrol is fuel, diesel is fuel, ????
@Denisjjj2 жыл бұрын
In my machine the piston of the infuser doesn't reach the upper position but stop at 3-4 millimiters from the top: the result is that a part of the coffee ground remain on the filter. Who know which is the problem?
@PeugeotStuff2 жыл бұрын
Infuser may not be assembled correctly. Make sure that when the arm is in the down-most position, the piston is flush with the infuser housing. If not, take it apart and re-assemble with the gears lined up properly.
@Denisjjj2 жыл бұрын
@@PeugeotStuff manually pushing the piston it reach the right top level. I think it depends from something during the process but i cant understand what. Everything seems right
@yusuftofa9482 жыл бұрын
HI, I AM ABOUT TO BUY AN LPG/G3 PEUGEOT 307, CAN I REMOVE THE LPG SYSTEM FROM THE ENGINE COMPONENT?
@makantahi37315 ай бұрын
yes
@krasimirkaramanov19822 жыл бұрын
I can't understand what be wrong?
@user-jm3ep2fi6s2 жыл бұрын
I got a cramp in my head while I was looking at this mechanism. You're a great engineer 👍
@americantruckeringermany83942 жыл бұрын
what can happen if you dont do an inspection of the system after 2 years?
@makantahi37315 ай бұрын
anything
@jackharry57673 жыл бұрын
Hello friend i get some issues in dodge charger especially in the gearbox there is stranger sound and vibration in the shifting of gearbox box what is reason please
@makantahi37315 ай бұрын
because you did not use lpg oil for gearbox
@KBL-MOTOREN3 жыл бұрын
Hii kan je ook LPG toerental verhogen zondag computer aan te sluiten? Door middel van schroedje te draaien? Inject motor bmw 6 cil
@tobiassytsma90773 жыл бұрын
Nee dat kan wss niet.
@kallemin87513 жыл бұрын
Dear sir,we are the manufacturer of automotive LPG/CNG conversion,if you have interest,pls cpntacte me whatsapp :+8615728041195
@bunyaminejder33343 жыл бұрын
Hallo, Was ist den bei Delonghi Kaffemaschine obk? Danke für den Antwort.
@MrEdwinAgustinus3 жыл бұрын
Hi. I have used this LPG for 1 year. I found something unexpected that using LPG has more fuel consumption compare to gasoline. At the MID if using LPG 10/100 km liter/km. But if I use gasoline is 6/100 km liter/km. Is it normal? Due to Sales engineer this normal.
@tobiassytsma90773 жыл бұрын
Fuel consumption on LPG is always higher than on gasoline. The difference depends on the type of engine, the type of LPG installation and the calibration. A difference in consumption like that seems pretty high..
@MrNaeemkhan0002 жыл бұрын
Lpg has less power than petrol thats y its been used more by the engine. People use lpg bcz its cheaper than petrol.
@scanialover2 жыл бұрын
@@MrNaeemkhan000 come to Turkey bro, my mom’s Mk4 Polo uses gasoline and autogas worth the same money, to we just get gas for it
@kermets2 жыл бұрын
@@MrNaeemkhan000 LPG has 112 octane so should make more power than petrol but i guess you need higher compression to take advantage say around 12-14:1 ratio which most petrol engine are not that is why the power is down on lpg.....yes it is cheaper or use to be in New Zealand
@makantahi37315 ай бұрын
@@kermets wrong conclusions: lpg octane number depends on ratio of propane and butane and if it is 50/50 octane number is about 104, and any fuel with higher octane number does not have more energy, so no more power, compression ratio is in direct connection with power and efficiency, no matter of fuel energy, if is higher compression, it needs fuel with higher octane numb, but it can have same energy but it will have more power, and power on lpg can drops because gas is overheated to reduce octane number to prevent valve burning, so in intake lpg has bigger volume than it would have petrol, but if you adjust spark plug advance and keep lpg temperature low, you can get same or more power than on petrol
@magdylast94083 жыл бұрын
Few months now since you post this video? Did the machine show this error again?
@tobiassytsma90773 жыл бұрын
No, it's been working great since, it's probably made 250/300 cups since the repair.
@magdylast94083 жыл бұрын
@@tobiassytsma9077 Good , mine is got the same problem and wanted to know if its long-lasting repair or not, but now I know Thank you
@tobiassytsma90773 жыл бұрын
@@magdylast9408 Be sure to check out this video as well, he shows the transmission in more detail. kzfaq.info/get/bejne/fsBoorSGrNq0mpc.html
@rameahbhatia33493 жыл бұрын
contact No .09742803638 BATIA retrfit
@rameahbhatia33493 жыл бұрын
We are retrofit of LPG kits in Belgaum Karnataka interested in getting dealership for stag brand LPG CNG kits for BELGAUM
@magdylast94083 жыл бұрын
Good job Thank you
@joaosidonio75623 жыл бұрын
Does Liquid LPG direct injection remove the need for gasoline?
@rodolfoandrade74533 жыл бұрын
Not really, you'd still need gasoline to start and reach operating temps, specially on cold weather when the pressure can drop.
@flappingflight8537 Жыл бұрын
There are only LPG powered cars usually Korean Hyundai,KIA that use injection in liquid phase in intake manifold runners . So it’s possible . The difference between LPG and gasoline is that the first one evaporates much better at low temperatures and doesn’t require the same air/fuel mixture enrichment as with gasoline on cold starts . So in order to avoid fouling of the spark plugs you have to trick the engine ECU by manipulating the temperature sensor readings only during the heating up period of the engine .
@desdevel3 жыл бұрын
Ik heb een bmw 535i op Lpg, alleen heb het raare probleem dat wanneer ik mijn kachel op minder als 32 graden zet de auto niet lang op lpg rijd ( hoog uit 10min ) daarna slaat die over op benzine, zolang ik em op 32 grade heb is er niks aan de hand, toevallig een iedee waar dit aan kan liggen
@PeugeotStuff3 жыл бұрын
Ik denk een warmte probleem, als je de kachel aanzet wordt er een gedeelte vd motorwarmte afgevoerd de cabine in. Ik zou beginnen bij het uitlezen van je gasinstallatie. Dan kun je vaak wel zien of dat inderdaad de oorzaak is.
@hassanamghar30313 жыл бұрын
Ik heb een lpg in mijn 307 ingebouwd sinds gisteren gaat het tanken extreem langzaam. Enig idee waaraan het kan liggen?
@PeugeotStuff3 жыл бұрын
Verstopping in het vulpunt? Rijdt u met een stofkap? De traditionele bajonet vulpunten zijn in elk geval voorzien van een terugslagklep welke verstopt kan raken.
@hassanamghar30313 жыл бұрын
Bedankt voor de snelle reactie Ik rijd inderdaad met een stofkap. Waaraan kan ik zien of mijn terugslagklep verstopt is geraakt? Als het goed is heb ik er 2 1 bij de tank en 1 bij de de bajonet aansluiting. Ik denk dat die laatste verstopt is geraakt. Ik ga maandag naar een garage om ernaar te laten kijken.
@PeugeotStuff3 жыл бұрын
@@hassanamghar3031 Bajonet aansluiting kan je eventueel perslucht op zetten (als hij van de auto af is). Alleen weet ik de openingsdruk niet. Ik denk niet al te hoog.
@hassanamghar30313 жыл бұрын
@@PeugeotStuff top bedankt! Ik houd je op de hoogte.
@kermets4 жыл бұрын
hi, thanks for the explanation.....can the third gen system (indirect liquid injection) us standard type petrol injectors ? fitted into each mainfold inlet runner. cheers Brett
@PeugeotStuff4 жыл бұрын
Don't think so, pressure on those injectors is usually way higher than on normal petrol systems
@LucianMarin774 жыл бұрын
be kind, what drill diameter in mm did you use?
@PeugeotStuff4 жыл бұрын
1.9 for 90 hp I4 engine
@sebas0511804 жыл бұрын
Mooie uitleg! Kan je ook een filmpje maken over wat er moet worden aangepast tijdens de inbouw? Wat moet er bijvoorbeeld worden aangepast aan in Ecu ? Moet de brandstof pomp worden uitgeschakeld? Wat voor een aanpassingen zijn er nog meer nodig bij een moderne auto ? Alvast bedankt!
@djordjepopovic83515 жыл бұрын
Hello, you reckon this system is enough for 92kw naturally aspirated engine?
@PeugeotStuff5 жыл бұрын
Yes, should work. You'll need to drill out the nozzles to appropriate size.
@djordjepopovic83515 жыл бұрын
@@PeugeotStuff Right, what'd be appropriate size for my car? I got Stag AC W01 injectors...