Aren´t you supposed to have silicone sealant at some places around the valve cover?

Downgrade on a m54b30

Your video actually helped me out a lot when I was first diagnosing this issue on my ‘87 528e. What I’ve come to figure out with this vehicle is that those wheel and speed crank sensor is play a big part in the rest of the vehicles operation. If they get too gunked up like mine did, i’ll eventually provide no signal and the car will not be able to start, I even did a test where I cleaned up the old sensor and put it back in and the car started but I still replaced the sensor anyway. Thank you again for this very informative video👍

you still have them? they are 200 more dollars now lol

Can you do a video on replacing the 4 accessory belts?

Hi, i have the E85 BMW with the Sat Nav version, is it still compatible on my car? Thanks!

Great video! I discovered a new way, with really a small impact, to have a new audio system! Thanks! :)

I think the same guy who has been wiring this 928 had been wiring my 928... With the loose seat and relay panel out. I bridged the connector by the battery that goes to the neutral safety switch to get car to crank on key again

Thank you for this video. I have a 2008 BMW X5 3.0si and my mechanic told me my Rear Axle transfer case carrier is completely rusted/rotten and is unsafe, and if the carrier brakes the transmission and transfer case will drop/hang causing other damage to the drivetrain and underbody. Unfortunately I did not take a good look at what he showed me, but would you happen to know what exactly is the rear axle transfer case carrier is? I've tried searching images online, but I only see what the transfer case looks like, but have no idea what the case carrier looks like.

You thing 535xi 2008 transmission fit 2007. 530 xi bro?

Very good video, I have an '06 with navigation, installed exact adapter, at first did not work, then rechecked the connections, you need to make sure the "aux" portion of the connector is pushed all the way in. Don't rely on the the clip lock closing, must manually push the plugs in the back of the receiver. Did this and it works perfect!

DONT TAKE THE BALL JOINT OFF TAKE THE FENDER LINER OFF >!!

I LOVE YOU JESUS❤

you are a f*cking legend, thank you soo much🫶🏼

Not covering the intake ports was stressing me out lol

Hi. Please How to dismantle the lower front bumper grille?

You do at home..?

Only video i've found for the 3.0 e83, you're the bomb man thanks so much for sharing this!

If just removing transfer case, is it necessary to remove exhaust?

We can’t see what you’re doing, what a waste of watching.

Quality video by the way

Hey man I can get it to start from the pin 14 and the live next to it like in your video. But the key won't crank it. I wonder if the ignition switch is broken. Do you know where I might find some diagrams

I did this exact mod but suddenly it switched to the aux port instead of the cd-port. Sound quality dropped significantly. Any ideas what caused this?

i watched it again. what is the other cable that runs parallel in the housing of the crank sensor cable?

Can you do a video on AC/alternator/power steering belt replacement?

Nice ,not as daunting as I would imagine. Looks just as involved as working on a 1UZFE. minus the spider plenum.

What bumper did you get and from where?

Are you going to share the STL file? Thanks

I need this done in my car and they are trying to charge me 1400 dollars for an hour job, that's insane.

How is Buick coming along

Gonna try this on mine started happening after driving a while and at 63k miles

is this the same process as changing the valve cover gaskets on a 2006 z4 which has an n52 engine?

hey I have a e60 528i and im trying to swap it with a 535i engine is that possible? And would I need different components for the 535i or would the 528i ones fit?

Was doing timing belt on my 1987 BMW 325ic and the CPS wire broke. Gave vin to parts supplier and the replacement CPS has a pigtail at the end and not a plug that goes back into the engine loom. Explained to supplier but had no answer. Thoughts?

Thanks a lot for the info !

what was the problem with the engine of the r53?? mine sounds like that too

How long should the whole job take?

Thanks you so very much. You made it look so simple and easy. You just saved me over $500. Now I feel I can complete this job

How long did the complete removal take

Can we fit 525i engine in 530 I

I’m looking at an ‘86 928s which has low compression on one cylinder. From everything I've read, it seems unlikely that the engine would have a lower end issue (only 65k miles). Do you guys agree? If yes, can the heads be removed without pulling the engine?

Are you willing to share the STL?

great video 🤣

That Buick had all the options. 👍

was it really that simple?

I have same module bluetooth, but when connect the adapter, cd changer don t work?! Can you help me with this problem, please ?!

Excellent work I enjoyed it

i have a 328i, im assuming it will fit but does anyone know anything i don't. thank you for any advice

Heck yea dude just enough motivation for me to pull out my old r53 engine n slap a replacement in !!