14 күн бұрын
2 ай бұрын
3 ай бұрын
Пікірлер
@curtisck813 10 сағат бұрын
Good video!!! It has also helped me make my decision on which loader to get an why,I'm going with the kabolite 988 basically for the size and boom length, it's a full bucket size taller, that way,I don't need a ramp,but I've heard alot of good things about the xdrc loader, all positive
@digitrc 6 сағат бұрын
@@curtisck813 good choice. I would like to add the 988 to my fleet as well!!
@CuzzieCuzz 4 күн бұрын
Things are coming out nice. One day at a time.
@albertsternberg6852 6 күн бұрын
What? What make my big arm move by itself and small and bucket, but at the same time.
@digitrc 5 күн бұрын
@@albertsternberg6852 if it just started happening and everything has been fine it’s likely a problem in the valve block.
@albertsternberg6852 5 күн бұрын
Wish I had somebody that could help me with this in my area New york
@Rubbyred 7 күн бұрын
Is it connected to the p802 truck with the Tamiya trailer?😮
@digitrc 7 күн бұрын
@@Rubbyred yes. It’s a little higher but with the weight it works fine.
@Rubbyred 7 күн бұрын
@@digitrc Thank you for your answer. I was worried because I only had p802 trucks when I was going to buy a trailer.
@digitrc 6 күн бұрын
@@Rubbyred there are some trailers that have a higher goose neck that fit the 802 better but the ones that are lower still work. The front axle on the trailer rides high when empty but loaded it rides good.
@Rubbyred 6 күн бұрын
@@digitrc Thank you for the good information,sir👍
@ryanlagoda1352 8 күн бұрын
nice! did you have to make brackets to fit that aftermarket bucket?
@digitrc 8 күн бұрын
@@ryanlagoda1352 nope just a little modification to the stock setup and it’s worked great. I did heavy mods to the stock bucket to make it work with the quick connect. I even turned it into a sieve bucket.
@540tony 10 күн бұрын
AT LEAST HE KNOWS HOW TO OPERATE MOST OF THESE VIDEOS NO ONE KNOWS HOW TO RUN MACHINE
@ayars660 10 күн бұрын
Which scale is this 6015 and are they the standard tracks? I’ve seen some with much narrower tracks.
@digitrc 10 күн бұрын
@@ayars660 it’s supposed to be 1/14 scale. I have not verified the scale on the 6015B. The tracks are wider then the other 6015B models out there but I think that they are more scale machines too. This one is pretty good but I had to put a lot of work into it to make it nicer. I do like the wide tracks on this machine. The crawler portion of this machine is very nice.
@ayars660 10 күн бұрын
Where did you order your machine from?
@digitrc 10 күн бұрын
@@ayars660 AliExpress. (Sfmodel store) I will avoid that seller on future purchases. AliExpress has been good so far for the rest of my purchases.
@fiskrond9212 12 күн бұрын
I face a dilemma.. i need a dozer but want a 360
@digitrc 11 күн бұрын
@@fiskrond9212 that’s a tough one for sure. Do you have an excavator already or is the 360L your first excavator?
@fiskrond9212 11 күн бұрын
@@digitrc never owned an rc of any kind let alone a hydraulic 360. Looking at 4200xl as I'm not interested so much in the detail (mirrors, cab, etc) but the entry level operation (and anticipated repair at some point).. the better stuff will come later 🙂
@digitrc 11 күн бұрын
@@fiskrond9212 4200xl is a good entry level machine for the price. You can always modify it like I have mine to make it what you want also. The dozer it’s so much fun! If all you have is a bunch of dirt to push around then the dozer would be my first choice. If you have a dump truck to fill and move dirt then an excavator would top the list.
@fiskrond9212 11 күн бұрын
@@digitrc and that is exactly my dilemma.. got lots of dirt to push.. but i want a 360.. am fascinated by the arm.. fixated with arm since gas mains replaced with JCBs all around my area when I was really young. Back in the days (70's) when you could get really up close to observe as long as you behaved yerself.. happy days! 🙂 ..and then came the Hy-Macs!!!
@fiskrond9212 11 күн бұрын
@@digitrc I've got say a level-ish 3x5m of vegetation (say upto 50cm tall.. nothing woody.. just weeds )to be cleared.. there will be burn piles! 😀
@lilnazxfunny7229 13 күн бұрын
How did you get that counterweight for the 4200? I the video if the accesories for the machine and you said we need to add more weight. How did you do yours?
@digitrc 12 күн бұрын
@@lilnazxfunny7229 I used wheel weights and stuck em on the back in a neat offset stack to match the rear curvature of the machine. I picked those up off of Amazon. They come in that black color.
@lilnazxfunny7229 11 күн бұрын
@@digitrc can you send me the link for the weights you got?
@digitrc 11 күн бұрын
@@lilnazxfunny7229 I would but I don’t have a link for em. It’s been a long time since I bought them .
@lilnazxfunny7229 11 күн бұрын
@@digitrc do you remember what the weight of each weight is? and how much you put on the back?
@RRCCONSTRUCTIONMININGREC-tl8yf 14 күн бұрын
Awesome video thanks for the post my Friend.😊😊👍👍🚜🚜🚧🚧🚧🚧
@digitrc 14 күн бұрын
@@RRCCONSTRUCTIONMININGREC-tl8yf you betcha
@davejackson3497 14 күн бұрын
Are they metric allens?
@digitrc 14 күн бұрын
@@davejackson3497 yes they are
@s4sthur666 17 күн бұрын
Hello man I got this truck and I burned my motor and I wanna do these updates and I was wondering if you put this motor with the stock esc that came in the truck or did you update that too I love your videos been watching of of them if you could give me a list of your upgrades that would be awesome
@digitrc 16 күн бұрын
@@s4sthur666 thanks for watching. I used the stock esc when I upgraded to the 45t bruised motor and 3to1 planetary gear reduction unit. But when I upgraded to brushless I put in a 2in1 motor esc combo. That gave me more torque and more speed and now I can run 3s lipo packs.
@awesomusmaximus3766 17 күн бұрын
I broke my first track in 9 years i can't believe they lasted that long
@digitrc 16 күн бұрын
@@awesomusmaximus3766 that’s awesome! These things last if you don’t abuse them too bad.
@awesomusmaximus3766 15 күн бұрын
@@digitrc I was trying FPV it caught a stick they needed shortening anyway
@digitrc 15 күн бұрын
@@awesomusmaximus3766 fpv is so much fun!!
@CuzzieCuzz 17 күн бұрын
Great Job. getting there, little by little, does not happen overnight.
@digitrc 17 күн бұрын
@@CuzzieCuzz Rocky soil is so tough to work. These rocks are scale boulders!!
@Timothy-gt7rp 18 күн бұрын
Nice work bro good video keep pushing more videos out yes sir 💯💯💯💯💯🔥😎
@digitrc 17 күн бұрын
@@Timothy-gt7rp thank you. Will do.
@blackdawgrc8425 18 күн бұрын
Loved your video mr.digit, but where you purchase 🤔 the brushless electronics parts and glue from??? Mind me asking?????
@digitrc 17 күн бұрын
@@blackdawgrc8425 the brushless upgrade I got from eagle Mach on AliExpress and the glue can be found at Amazon or beacon website.
@blackdawgrc8425 18 күн бұрын
Badass video mr.dig it, but mind me asking what's the benefit for the fan on the hydraulic pump 🤔?????? Your professional rc feedback is always appreciated and love your bulldozer 😊videos too! Just 😊brought a used rc4wd bulldozer dxr2 last week .
@digitrc 17 күн бұрын
@@blackdawgrc8425 thank you for watching. I use the Fanny to cool the compartment when it’s hot out. Helps keep the battery cooler too.
@blackdawgrc8425 17 күн бұрын
@digitrc ohhhh okay that's understandable! Mind me asking??? Do you know where I can purchase that fan??? The reason why?? My homeboy is trying to sell his to me
@digitrc 17 күн бұрын
@@blackdawgrc8425 you can get one on Amazon. I used a 12v axial fan. You can get them in various sizes.
@curtisck813 19 күн бұрын
I can't wait to get mine...I was going to get the kabolite 988...but I've heard so many bad things about it so I'm getting the XDRC
@digitrc 19 күн бұрын
@@curtisck813 that’s cool. What kind of things have you heard about the 988?
@curtisck813 19 күн бұрын
Mannn....u r a beast with that camera....and got the nerve to put chains on the tires???😅😅😅😅u are tooo much...love it!!!!
@digitrc 19 күн бұрын
@@curtisck813 thank you very much!
@josepenate7367 19 күн бұрын
Good work
@digitrc 17 күн бұрын
@@josepenate7367 thank you
@fiskrond9212 21 күн бұрын
hi again, is this before or after you modded it? looks like it's packing a good punch
@digitrc 20 күн бұрын
@@fiskrond9212 this is when I first started to modify. It’s running stock track motors, but I added a piece of led to the back to test how much counter weight I needed to add. You can really see it well at the end of the video. I also did a minor modification to fit the quick connect so I could use the attachments like this scarifier. It has plenty of dig power It just really needs more counter weight to make good use of that power.
@curtisck813 23 күн бұрын
That loader is bigger than I thought! I wanted the kabolite 988 because I have a Cat 793 mine hauler but I've heard soooooo many bad things about it and for that money? I think I'll get what you got...just in yellow 🐱....😉
@digitrc 23 күн бұрын
@@curtisck813 I’ve been happy with this one
@npalen 25 күн бұрын
You really need to get a small solvent wash tank to clean gears and bearings prior to greasing and reassembly. Also, not a good idea to be using an abrasive cutoff wheel right next to the bearings and gears.
@npalen 25 күн бұрын
WoWWWW!!!!!!
@ktmdude24 26 күн бұрын
Where's the best place to find rc equipment, i might get into the hobby one day
@fiskrond9212 28 күн бұрын
What does it weigh and how many/big battery can you get in this? Also there looks to be a bit of slop on the stick.. what is overall build quality like oob? I really want one of these but it will be a big spend (I thought sea-fishing was an expensive hobby!).. so trying to get an idea what entry-level in the +20Kg sector involves. 🙂
@digitrc 28 күн бұрын
@@fiskrond9212 mine weighs 44 pounds. I’ve added 4-5 pounds on the back end and that has helped with the dig capabilities. It has plenty of power. The overall quality is good. I’ve worn parts out and had to replace different items and make modifications. I have videos for most of those mods on my channel. I don’t think it’s the best machine but it has been pretty reliable after replacing the drive motors. The stock drive motors were the worse and broke every time I went out with it. Since I upgraded to the brushless motors for the crawler system it has been fantastic. So after what I have put into this machine it still came out cheaper then the 360L. It’s a fantastic entry level hydraulic excavator. I still use it a lot and have not replaced it yet. 4plus years and still going. I use 3s 5000mah soft packs. That’s all I could fit without modifications and being able to slip the battery in and out. With that I get about an hour of run time with it. Quick swap and I’m up and going again with a new pack.
@fiskrond9212 22 күн бұрын
@@digitrc just like to say a proper thanks for such a detailed reply 👍
@digitrc 22 күн бұрын
@@fiskrond9212 you betcha. Thank you for watching.
@CLAUDIOSRC9529 29 күн бұрын
@CLAUDIOSRC9529 29 күн бұрын
@fiskrond9212 Ай бұрын
why is the drive motor on the track exposed? You get fired for operating machine like that....
@digitrc Ай бұрын
@@fiskrond9212experimenting with a different brushed system. Didn’t work too well. Not enough torque. I upgraded to a brushless drive system.
@fiskrond9212 29 күн бұрын
@@digitrc I suspected there would be a good reason.. 🙂
@fiskrond9212 29 күн бұрын
@@digitrc am very much in favour of lower speed with higher torque.. 👍
@digitrc 28 күн бұрын
@@fiskrond9212 that’s why I like brushless. You get speed and torque. They cost way more but are worth it.
@fiskrond9212 Ай бұрын
have you got any more specs on it?..
@digitrc Ай бұрын
@@fiskrond9212 what kind of specs are you looking for?
@fiskrond9212 Ай бұрын
@@digitrc weight (with only basic battery) and how to get as many batteries in it as possible 🙂
@royrezac381 Ай бұрын
Hey bud, the much you paid for that machine I would call a dealership and say hey and tell them all about the problem that swing not with lose but I hope it works out for you bud
@royrezac381 Ай бұрын
I’m sorry bud that’s pretty dang bad. I have a Volvo not hydraulic. I don’t even move near that much not even third of that. That’s pretty bad.
@royrezac381 Ай бұрын
You have to try take them off and turn around and put the screw back in
@jaredgreenhut9768 Ай бұрын
Cab alarms definitely went off on that one. 😂😂
@digitrc Ай бұрын
For sure
@Aloneboy-yw6sz Ай бұрын
What's price
@RRCCONSTRUCTIONMININGREC-tl8yf Ай бұрын
Awesome thanks for the post.😊😊👍👍🚜🚛🚚🛻🚧🚧🚧🚧🚧
@digitrc Ай бұрын
Thanks for the view.
@TinylandsRC Ай бұрын
nice view 😎
@digitrc Ай бұрын
Thanks. Something a little different.
@winstongsd4273 Ай бұрын
wow…really nice. good work.
@digitrc Ай бұрын
Thank you very much.
@gordusbar Ай бұрын
Good luck, may you be full of blessings, excuse me for asking how much does that remote control DXR2 bulldozer cost and more or less where can I get it, thank you and sorry for the question.
@digitrc Ай бұрын
No problem. Thank you for watching. You can find the current price on RC4wd.com.
@winstongsd4273 Ай бұрын
Looks like fun. Probably need a few flagmen for safety though.
@digitrc Ай бұрын
Yeah I need more crew on location for sure.
@ryanlagoda1352 Ай бұрын
I definitely need a wide track kit for mine.
@digitrc Ай бұрын
It has made a world of difference on mine. I would highly recommend it.
@FortycadeConcept Ай бұрын
Your channel is just awesome. ! Let me ask you something. This Sotiriadis sticker you got there, this i mining company here in Greece. Did you print that sticker ?
@digitrc Ай бұрын
Thank you so much! 😊. Those stickers came with the machine and I liked it so I kept them. I did have them reprinted on vinyl for better quality. The stickers that came with them were a coated paper sticker so they absorbed oil. The new vinyl ones are awesome.
@bdalrzaqa Ай бұрын
حفاره ياريت عندي مثلها
@mertkaya2152 Ай бұрын
nerden satın alabilirim ?
@digitrc Ай бұрын
AliExpress or toucan hobby.
@johne8941 Ай бұрын
The beginning looked so real! Nice job
@digitrc Ай бұрын
Thank you very much!
@Timothy-gt7rp Ай бұрын
What Up Nice Camera Work Keep pushing more videos out yes sir 💯💯💯💯🎉🎉🎉🎉🎉.
@digitrc Ай бұрын
Thank you very much will keep it up!
@curtisck813 Ай бұрын
Dope ass video....nice camera work!!🔥🔥🔥
@digitrc Ай бұрын
Thank you very much!!😊
@CharlesZweck 2 ай бұрын
love videos dont stop making them
@digitrc 2 ай бұрын
I’ll keep them coming. Thanks for watching.
@RRCCONSTRUCTIONMININGREC-tl8yf 2 ай бұрын
Awesome thanks for posting have a nice day.😊😊👍👍🚜🚜🚛🚚🛻🚙🚙🚧🚧🚧🚦🚦🚦
@digitrc 2 ай бұрын
Thank you. You have a great day too!