Thank you for this video. I have an older model of this strimmer (It must be at least 15 years old, it was in the garage when I bought the house and it’s still going strong!) I of course don’t have the instructions and there isn’t a metal guard on my version. The black plastic guard has just fallen off, but after a good clean and watching your video I realised there was a hole and the screw had fallen out ..but this was easily fixed back with a new screw! No signs of wear on the cable on mine even though I hadn’t fixed the cable in the safety clip but will do now I know how! 🙏 The strimmer wire length does need to be kept inside the metal cutter (have had it fly out at me before too! Ouch!) …but the line lasts ages… in fact I think I’ve replaced it only about 3 times .. but a great little strimmer all in all! Good old Bosch! Hope yours lasts as long as mine has! 👍🏻Tina 😘
@philipsouthall82238 күн бұрын
great job opened my eyes with that felt
@a68war8 күн бұрын
Bit late to the party, well done struggling one handed haha! I have one of these, love it, and yes we can park our bike in it (funny how so many people can't handle that prospect)! But if you pack it away flat laying it down front to back, fold it in twice (red x2 and black tops aligned together and the straight bottom edges together) it fits the bag nicely without measuring. When you lay it out left it like that and all three pole edges are together laid flat so you can put them in just walking around the edge easily. Also I know this was a demo but don't you place your guy ropes at a slight angle outwards, not just straight front and backwards?
@user-dp7zi6ih8p9 күн бұрын
Hi there. Can you use nail instead of flame to attach torch on felt?
@TheThorpester9 күн бұрын
That's exactly what I did here buddy.
@petermcintyreA110 күн бұрын
That was very helpful: I bet your wife was pleased!
@TheThorpester10 күн бұрын
For about 1.5 minutes
@markrefoy12 күн бұрын
Great video very informative, I’m in exactly the same situation, upgrading from a 2012 iMac to a Mac Studio and Studio Display. Like you I want the Apollo Twin but can’t afford it yet! Top tip about the wireless mouse and keyboard, that’s saved me a lot of head scratching, thanks.
@jamilamc54917 күн бұрын
My new iron not heating Y????
@aussiegirl65418 күн бұрын
Good review, thanks. I bought one today, but I haven't used it yet. Im going to buy some silicon and rack accessories to go with it. I own another brand of air fryer and got this because of the double drawers. The cord isn't very long, so I may connect it to a power board. A review on a site said beware of putting on stone benchtops as air fryers can crack benchtop. So put a board underneath or mat and beware if too close to a window as the reviewer said a friend cracked their window from the heat of the fan of another air fryer. Otherwise, it's a great airfryer from what I've read and has 5 stars, and your review shows how easy it is to cook a beautiful dinner. Happy cooking. 😊
@TheThorpester12 күн бұрын
@@aussiegirl654 nice one buddy and thanks for the top tips! 🫡
@olivo-viejo22 күн бұрын
the shampoo on the car did just nothing. There is a mondial problem with these bottles.
@rockythepitball27 күн бұрын
You need to move the ninja 🥷 about 12-15cm from the wall so the vents at the back have space
@hariselhag857929 күн бұрын
Dear, thanks for the detailed introduction, just a question, can a solid knife, circular, be mounted on it? Thanksss
@TheThorpester28 күн бұрын
Haha lol. Worth a shot! Make sure you're wearing full chainmail though when you test it. And a Helmet and Steel Toe Caps (or Crocks) :)
@darklord20098uk29 күн бұрын
Mug
@Sammy-st8iyАй бұрын
I´am in the same boat and will swap my iMac Late 2012 with a Mac Studio next week. Your video was very helpful because I guess I will need the same adapter to connect my old Thunderbolt 1 Audio Interface (Focusrite Clarret 8Pre) to the new Mac.
@geconucdАй бұрын
Thanks for the video. Sadly, I bought this to cut the edging around my lawn. The wire keeps breaking and I’ve yet to even cut a single blade of grass with it. Waste of money (for my purposes anyway).
@sudavies3629Ай бұрын
Gotta do mine this weekend, and like you I’ve never done it before but this vid is really helpful thank you. You did a great job on yours 😊
@TheThorpesterАй бұрын
Nice one buddy. All the best with it. You'll have it sorted no problem
@sudavies3629Ай бұрын
@@TheThorpester Yea considering I’ve never done it before it’s turned out pretty well 😃
@gianlucasbernaАй бұрын
Ma perché? Non tutti siamo youtuber! Anzi…
@chickenlickin3820Ай бұрын
Hi mate, Gosh was in the same predicament about 5 years ago when my digi 002 rack headphone out died. (had an old G5 Tower) then new imac, apollo interface took over. now i'm going to be moving over the the mac studio m2 max and maybe a cheaper monitor?
@TheThorpesterАй бұрын
Hey buddy. I'd deffo look at a cheaper monitor. The one I got doesn't blow me away at all. I'm sure there's better out there. Refresh rate is far too low @60
@mikerusbyАй бұрын
my shed is is worse shape than the titanic. i am still going to do the shed felt today though :) nice tutorial
@TheThorpesterАй бұрын
@@mikerusby good luck. I’ll be thinking about you 🫡
@mikerusbyАй бұрын
@@TheThorpester cheers, just hope the weather holds out :)
@shirleycassidy4990Ай бұрын
Just got this one today. Thanks for a good demonstration. Look forward to trying it out. 👍
@TonyTheakstoneАй бұрын
The strimmer wire just breaks every couple of feet of strimming. Driving me nuts. Tried rewinding the wire a number of times in the spool to ensure not tangled but still keeps breaking
@TheThorpesterАй бұрын
@@TonyTheakstone sadly it breaks when you strim anything but grass. Even your bare toes
@C.Brown5150Ай бұрын
Good job for your first build.. What really matters in the end is that you're happy with your work.. You build for you and what you like. 👍
@C.Brown5150Ай бұрын
Everyone has to start somewhere and for your very first kit , I think you're doing a great job.. Model building is all about live and learn.. You'll find out what works best for you.. Just remember one thing about model building :: It's a hobby and nothing more.. It ment to be fun and enjoyable , so don't make it difficult .. And build your model for you and the way you want it to be.. Everything doesn't have to look just like it does on the box.. And in the end all that matters is that you're happy with what ever it was that you built.
@shuggiemcg1Ай бұрын
Can you refill the spool with cheep wire or do you have to buy a whole new cartridge?
@TheThorpesterАй бұрын
@@shuggiemcg1 I think you can pal. You can get stronger wire too I think
@darattaqwaАй бұрын
Good video, my shed is leaking through, I’m planning on repairing it but I’ve always wondered won’t rain water get through the clout nails in the felt?
@TheThorpesterАй бұрын
@@darattaqwa the felt seals around the nails so all good. Mines still fine pal
@wingrider7931Ай бұрын
Very nicely done!
@kotliboy2 ай бұрын
Can anybody recommend a better line? The one it comes with is very fragile as mentioned in the video.
@TheThorpesterАй бұрын
@@kotliboy not bought any yet but I think you can get stronger wire and wind it on the spool.
@ichosethishandle2 ай бұрын
Much better than the B&Q video
@PokerMuppet2 ай бұрын
It's all very well packing the tent in to your top box but you totally forgot the poles and all the other gear.
@TheThorpesterАй бұрын
@@PokerMuppet poles etc were in the tent bag with the tent
@thisjaredrussell2 ай бұрын
Actually thinking of picking one of these up in 2024 to replace my old faulty Roland A90. Don’t want to spend much so the Mk1 is looking favourite. Am I the only one who hates the led key lights? Anyone know if you can turn them off?
@thisjaredrussell2 ай бұрын
Apologies - should’ve watched through before asking. Glad you can turn them off. I know you made this 8 years ago, but thanks 😊
@TheThorpesterАй бұрын
@@thisjaredrussell lol no worries. Yea you can turn the lights off. Careful though as I don’t think NI support the 1 or 2 anymore
@thisjaredrussellАй бұрын
@@TheThorpester bought one a couple of weeks ago. You’re right it’s not supported by the latest NI Kontrol software, but the previous version is still available to download. I really like it. Keyboard feels good, and as for the lights I actually like them after all! Cheers for the reply, and all the best.
@TheThorpesterАй бұрын
@@thisjaredrussell nice one pal. Glad you like it. Mega controllers
@jameelchoudhury2 ай бұрын
Just bought this. Thanks mate enjoyed the video a lot
@ezekielgskeen86072 ай бұрын
Thanks a million! just Ordered one off the strength of your review off Amazon, should come by monday Cheers Sir! 🔥🔥
@DWAIN612 ай бұрын
Nice job.
@bhekashambira96002 ай бұрын
😊
@paulbrown87712 ай бұрын
Great video I’m about to do the same thing , going from a Mac Pro 2008 machine to studio m2 , wish me luck ! 😂
@TheThorpester2 ай бұрын
Thanks buddy and good luck!
@grv13m2 ай бұрын
was just looking for headset reviews,,, landed here, it was surreal to listen to you sing, surreal
@stefanwosinsky19352 ай бұрын
I mean ideally the combine harvester would be in the fields, but in order to get there they need some roads. Introduce too many impatient drivers and it becomes a problem. Everybody should ask themselves what they can do differently, not what someone else can. We don’t enjoy using public roads but with all the city folk spreading and settling in the countryside there’s no real way around it is there?
@andyninja9492 ай бұрын
Great video bud 👍🏻 but I just carnt understand folks wanting to put the bike in a tent when out camping
@TheThorpester2 ай бұрын
Thanks mate and yea, I don't put the bike in the Tent. I use the space for cooking and activities lol
@324462 ай бұрын
I cannot understand the instructions at all. Why can’t they send things already assembled. Thank god I found this or I would be sending the whole thing back.
@TheThorpester2 ай бұрын
Nice one buddy. Glad the vid helped!
@ShowRyuKen2 ай бұрын
Thanks for making this video. I've never really done repairs/DIY before, but I was able to reattach the top layer of felt to my shed today (which had presumably been torn off by wind) - and it's been a day of filthy weather again, so I'm especially grateful to have been able to do the job myself using some of the principles you outlined in the video. From a complete and total novice, you did indeed give me the confidence to have a go myself - so thanks again.
@TheThorpester2 ай бұрын
That's great news buddy I'm super glad the vid helped you. Well done mate.
@adelinetamayem75432 ай бұрын
Thank you for this video, it help me assembly mine, which i bought yesterday from Homebase
@websnuzy62402 ай бұрын
Great video, thanks. I've just bought one from B&Q.
@andrewarthurmatthews66852 ай бұрын
I have this one but have found the line breaks or wears very quickly thus you don’t get the optimal length of cutting line .
@papasouzas6573 ай бұрын
The best review !!! Thank you 🙏
@zulkharnainmuhammad30963 ай бұрын
most of the time mic is disabled and difficult to enable thru settings
@karlbratby43493 ай бұрын
Fabulous job
@nas4apps3 ай бұрын
Second Kärcher and like how many hours does somebody wash stuff and tiles at home? The unit (now the capacitor, seemingly) often breaks down. Such a shame because the rest seems like a solid build quality. To me it is a big pain on just getting the (2018) capacitor out of the unit, seems stuck. Why why why? My central heating pump is running 20 years, EVs drive 150000km without issues. Kärchers only x hours .... ? or just me? What are your experiences? Mine is now taken apart on my garden table - capacitor stuck, what a mess, didn't clean anything ... seems like a consumer - market choice that stuff needs to malfunction. What would be a better power cleaner than my K4, a durable one!
@khudson49013 ай бұрын
Background music too loud
@zulkharnainmuhammad30963 ай бұрын
mic is stiff
@stephenmoore56553 ай бұрын
Thanks for video, just about to use mine for first time
@usht97853 ай бұрын
Thank you for taking the time to go through in detail... my instructions are missing... would you be able ( or have you done) loading/replacing wire please: that's where I burn each strimmer out... i think i've killed three so far...