Hey man great video, do you have the internet link for the intake? Did you have any problems? Check engine lights?
@notalentgarageАй бұрын
Thank you:) No problems, no check engine lights! www.ebay.com/itm/284618481638
@slimjim4453Ай бұрын
Doesn't thr thread on stud get damaged
@notalentgarageАй бұрын
No, there was no damage, but the bolts got stuck in the socket, so I bought new ones!
@rayford86752 ай бұрын
*Promo sm* 🤩
@user-uo7ym6xf9j2 ай бұрын
Which diameter is the air breather?
@notalentgarage2 ай бұрын
Sorry, but I'm actually not sure about that!
@robertpalmer58032 ай бұрын
Just been asked to take one out and there isnt one in there...
@notalentgarage2 ай бұрын
Haha :) Good that you're putting one in!
@jeresuhonen75302 ай бұрын
I didn't have one either
@saabaero62113 ай бұрын
Hi do you have part numbers on the rotors
@notalentgarage3 ай бұрын
ebcUSR1408 :)
@snurrigt4 ай бұрын
Do you recommend these tints? Do they rattle while driving?
@notalentgarage4 ай бұрын
I can actually recommend these; I haven't had any problems with rattling myself. If you were to get them, you can attach more hangers, which come with it:)
@IsSOfficialY4 ай бұрын
About the air intake screws at the beginning, the left one just keeps spinning. Dunno what to do... I don't have another intake lol, I just wanted to see how u did it, but seems like u couldnt figure it out either. Any tips? I tried WD-40 and bunch of other stuff for hours. I dont wanna chop it off because I need it
@notalentgarage4 ай бұрын
We initially considered drilling out the screw, but at that time, we didn't have a sufficiently good drill. I think drilling them out is the most efficient method. Good luck :), many seem to have trouble with those screws being rusty/bad!
@IsSOfficialY4 ай бұрын
@@notalentgarageThanks for the quick reply! I dont have a drill :/ any other options I could try?
@notalentgarage4 ай бұрын
@@IsSOfficialY Sorry, buddy! It's also hard to comment on alternatives when I don't really know what it looks like other than the screw is turning. I think drilling is your best option, maybe you can borrow a drill from someone? Good luck, you'll figure it out one way or another :)
@IsSOfficialY4 ай бұрын
@@notalentgarageHmm, okay, would the Bosch EasyDrill 18v 38nm drill work? Goes up to 1630rpm. It goes for 70€ here on sale, figure I could buy it if it works. I think I have some metal drill bits laying around, what mm do u think would be sufficient?
@notalentgarage4 ай бұрын
That machine is more than sufficient, good luck, buddy:)@@IsSOfficialY
@antoniou55 ай бұрын
Do you have to remove the handbrake cable in order to remove the caliper?
@notalentgarage5 ай бұрын
No:)
@ajones68386 ай бұрын
big help, cheers
@notalentgarage6 ай бұрын
Nice to hear that the video was helpful :) Cheers mate!
@remonelke34686 ай бұрын
Toll erklärt danke.. vielleicht die Instrumente auch zeigen ...das wäre tolle Ergänzung...z. B. welche Schrauben da montiert sind welche Nussgrößen nötig zum lösen......etc..
@notalentgarage6 ай бұрын
Thank you for your feedback, I will keep this in mind in the future regarding the size of the tools, etc. :)
@mmmddd43666 ай бұрын
That cover doesn't exist. The whole shroud is one piece
@notalentgarage6 ай бұрын
Perhaps it varies between different models, etc.? On my CZT, there is a hatch there, even on the Mitsubishi Colt CZ3 1.3 from 2007 that I have replaced before. Hope you solve it in another way :)
@mmmddd43666 ай бұрын
The Australian RG is such a pain, can't get retaining spring for H7 in either, H7 I had to glue to hold it. 4 different fasteners. Worst design I have come across so far
@notalentgarage6 ай бұрын
@@mmmddd4366 But you fixed it, nice job!
@80skid836 ай бұрын
11mm bolt and do you need to change the washer on the bolt ?
@notalentgarage6 ай бұрын
Yes 11 mm. I didn't change the oil plug this time! If it is in good condition, it can be reused, just check that the gasket looks good :)
@BorisLikesBeer137 ай бұрын
Thank you very much ;)
@notalentgarage7 ай бұрын
Thank you for watching:)
@billywilliams-nr6gw7 ай бұрын
Do I have to oil a foam filter ?
@notalentgarage7 ай бұрын
No, you don't need that, but you can wash it with soap and water if necessary :)
@darrencole83496 ай бұрын
What do you do with the cable that was connected to the side of the air box. On the left as you look at engine mate?
@notalentgarage6 ай бұрын
@@darrencole8349 Sorry mate, I actually don't know which cable you're referring to, is it visible in the clip? If so, what time, and I'll try to help you :)
@darrencole83496 ай бұрын
@notalentgarage sorry my bad its attached to the air box at the back then clips in around the front. So yeah it's all comes off together. Sorry having a slow moment lol
@notalentgarage6 ай бұрын
@@darrencole8349 No problem mate, nice to hear that you figured it out:)
@Yakobo02508 ай бұрын
At least show how to put them in. Useless video
@balangnhang81148 ай бұрын
i have problem with my nissan almera n16, the oil pressure sensor light waring alway flickering.. do u know what is problem ? bytheway you in Fin or Sweden ?
@notalentgarage8 ай бұрын
Hello! It could be due to many different things; the simplest and easiest to try is to start by changing the oil and oil filter. But maybe you've already done that? I am located in Sweden :)
@balangnhang81148 ай бұрын
@@notalentgarage thanks so much bro. i just got this problem today, maybe i have to change oil +filter tomorrow bymyself. cuz tomorrow is weekend, noone work.i just afair my car broke. if it not work, i can't go to work. actualy, i not finnish but i live in finland, fucking finland.
@notalentgarage8 ай бұрын
No problem, brother. I hope it resolves itself. If the issue persists after changing the oil and filter, you can at least exclude the possibility that the oil filter is clogged. Good luck :)@@balangnhang8114
@jaaa32399 ай бұрын
Witam jak można regulować żarówki w colcie ?(pomijając ustawienia w manetce obok kierownicy)
@notalentgarage9 ай бұрын
Hello, if I remember correctly, there should be adjustment screws behind the headlights, under the hood. There are probably guides available online as well :)
@jaaa32399 ай бұрын
@@notalentgarage Dzięki za wskazówki
@notalentgarage9 ай бұрын
No problem mate:)@@jaaa3239
@user-bh2kg2un8h9 ай бұрын
Black smoke and consuming excess fuel
@notalentgarage9 ай бұрын
?
@Nicksterpwn10 ай бұрын
Great video, nice and clear visuals of what you're doing and each individual step. A lot of other videos cut to halfway through when they've removed all the plates and trim already and say 'here's how to change the oil' while pouring it into the engine 😂 no shit 😂
@notalentgarage10 ай бұрын
Thanks mate:)
@gikaradi879311 ай бұрын
how many liters do you fill in ??!Great NTG!!
@notalentgarage11 ай бұрын
2,7 L :)
@37Retro Жыл бұрын
Thanks, great little video this one. I had seen a few others but with the camera angles you are always wondering what you are looking at with some of them. This one is nice and clear. When I picked up my FN2 I read up that it was a bit of a process to change the filter and was not sure I could be bothered with it and it's just easier to take to a garage but this looks ok. One thing, I did hear you have to remove the wheel as you have shown and remove the wheel arch lining, plastic panel. Those plastic studs? were there many of them to remove and did you break any? Just wondering if it might be worth trying to source a bunch before I start. Keep up the good work, subbed!
@notalentgarage Жыл бұрын
Thanks for the kind words and for the sub:) I just remove the two plastic studs that I show in the video, none broke. I have also previously changed the oil without loosening the plastic, it works too. But if you spill a lot of oil when you change the filter, it gets quite messy on the plastic. Overall, the work becomes easier if you loosen the two plastic studs in my opinion:)
@dickjackson25 Жыл бұрын
Could I do this by only jacking it up on the drivers side only?