Great video! Can’t believe it doesn’t have more views. I owned this replica too last year. It overall felt great, but I’m personally quite disappointed by the slow semi ROF and trigger response even with precock set on the S3 ETU.
@DucknDiveAirsoft20 сағат бұрын
Thanks! Yeah a full build with a custom mosfet and trigger can get far better, but for a stock gun it's not terrible. I havnt really played with any settings in the ETU yet.
@NeilDjents10 сағат бұрын
@@DucknDiveAirsoft How do you find the trigger response to be? It's been a while since I played with it. Maybe the trigger is spammable if pulled in the right way.
@banksblast30954 күн бұрын
Can I use silicone grease to clean o rings and such? I want to avoid 100% silicone oil In gear box
@DucknDiveAirsoft4 күн бұрын
@@banksblast3095 for cylinder head probably not an issue either way. For the piston and nozzle you need lighter viscosity. Grease likley is to heavy and may not function well. Oil is a medium weight and only a tad should be used. An alternative that may work (don't quote me) could be TechT Gun Sav. I've never used it for an AEG but it is a bit lighter weight of a silicone grease. Not sure if it would impeded the piston or nozzle function (if it's too thick).
@BorelessAirsoft9 күн бұрын
Did the windshield take some bad hits?
@DucknDiveAirsoft9 күн бұрын
@@BorelessAirsoft it took all the hits Hahaha. Don't think any damage was done. Truck is meant to get hit lol.
@mikelondres387410 күн бұрын
Hey, do you know if it's possible to change the camera cable in order to make it even longer? I want to hide the main body in the battery pouch
@DucknDiveAirsoft10 күн бұрын
@@mikelondres3874 I'm not sure what you mean by hide the main body in the battery pouch but you can change the cable to any length you want.
@karimalarifi777816 күн бұрын
My trigger wobbles. When i opened the unit. There was no TRIGGER PIN installed on it😢
@DucknDiveAirsoft14 күн бұрын
Uh oh haha. That's not good!
@LandonLinker-ql5vp16 күн бұрын
I was there like 3 or 2 years ago and going here this year for my birthday
@DucknDiveAirsoft16 күн бұрын
@@LandonLinker-ql5vp awesome have fun! 😁 👌
@kamikadze_official19 күн бұрын
is it compatable with polarsar f2 engine? and what other mags can you use with this gun?
@DucknDiveAirsoft19 күн бұрын
I understand it to be compatible with AN F2 since it's a V2 gearbox but you'd need to consider the wiring due to split gearbox design (the ETU wires to the engine selenoids so may be tricky to open the gun) and also the nozzle length is not a standard M4 nozzle but I believe polarstar has options for ICS nozzle lengths. Mags are a bit annoying in that they are proprietary so ICS PDW9 mags are the best option. Honestly their PDW9 mags are quite nice. They also have a 9mm adaptor for the ICS drum mag. I've heard some people have succeeded getting other similar 9mm mags work but with modifications. The main issue is the mag catch system is different on the PDW9. I've only tried ARP9 mags and they don't work as is (I did not attempt any modifications).
@kamikadze_official19 күн бұрын
@@DucknDiveAirsoft Thanks for the quick reply! I'm gathering info because I just bought it without any research. Yeah, the mag compatibility is bad, and the ICS PDW9 mags are nice but quite expensive in Europe. Regarding the PolarStar nozzle compatibility, I found a few options on their website: 1. ICS MP5 A/SD length - 1.205 2. ICS SIG 550/551/552 length - 1.3435. Which one should I go for? I have a Maxx M4 hop-up unit lying around and I hoped I could use that with the PolarStar F2. Will it be compatible with the PolarStar ICS nozzle, or do I need a different PolarStar nozzle? Should I even change the hop-up unit, or is the stock one good enough?
@DucknDiveAirsoft19 күн бұрын
@kamikadze_official id hit up polarstar either on their Facebook or email to confirm the nozzle variant. They should reply quick. I'd just leave it as the stock hop. In my opinion, the stock ICS hop is fine! Even with a short barrel I have no problem hopping 0.32g bbs 50m to 60m . I've had nothing but trouble trying to change hops on guns. It's hit or miss at best. If you did go Maxx there are specific ones marketed for ICS and then also ones specificly marketed for polarstar engines (I'm not sure if there is a polarstar + ICS version lol). I also don't really know what would be different between the various models of hops that Maxx has. I havnt dug deep into it so I'm not confident what would work best.
@kamikadze_official19 күн бұрын
@@DucknDiveAirsoft Thanks for the advice! I'll definitely reach out to Polarstar for confirmation on the nozzle variant. I'll stick with the stock ICS hop-up for now since it seems to be working well with. I agree, changing hop-ups can be hit or miss. If I decide to go for a Maxx hop-up, I'll make sure to do thorough research to find the right one for my setup. Appreciate the insights!
@DucknDiveAirsoft19 күн бұрын
@kamikadze_official good luck!! 🤞
@NoahBoner20 күн бұрын
This man is so violent lol. This pistol haunts me
@DucknDiveAirsoft20 күн бұрын
@@NoahBoner 😂🤠
@NoahBoner20 күн бұрын
@@DucknDiveAirsoft I need one so desperately lol.
@DucknDiveAirsoft20 күн бұрын
@@NoahBoner never a better time then now 😂
@NoahBoner20 күн бұрын
@@DucknDiveAirsoft I'm working buying one! Now isn't the best time. The time Is now!
@DucknDiveAirsoft20 күн бұрын
@NoahBoner 😂 yess! 🔫 💪 Gotta save slow for big dreams.
@Ziraffe.cat.studio23 күн бұрын
Will you be at rampage Edmonton tomorrow?
@DucknDiveAirsoft23 күн бұрын
That's the plan
@jonwheatley782523 күн бұрын
Great video bud! Enjoyed every minute of it!
@DucknDiveAirsoft23 күн бұрын
Enjoyed running with you sir
@albertamilitia228023 күн бұрын
Awesome video guys!! and Glad to have been there with you..... looking forward to soooo many more of this
@DucknDiveAirsoft23 күн бұрын
Thank you! We had a great time playing NATO with all!
@Asp700025 күн бұрын
Would you like a cup of tea with your SA80?
@DucknDiveAirsoft25 күн бұрын
🍵
@TotshotAirsoftАй бұрын
🔧
@e.7732Ай бұрын
Great review! Hoping to see more Rampage gameplays from you throughout the summer season.
@DucknDiveAirsoftАй бұрын
Thank you! On it 🫡🫡🫡. They are coming.
@BorelessAirsoftАй бұрын
Hey man sick video as always!
@DucknDiveAirsoftАй бұрын
Thanks man! ☺️
@twingarlicАй бұрын
BOOM .... hit 😔
@masoumi12Ай бұрын
So i tried this, my muscle memory accidentally set the hammer prime while i disassembled it any idea how to fix it???
@DucknDiveAirsoftАй бұрын
I'm not sure I understand what went wrong but I think you have it disassembled and the hammer is locked back keeping the rear saftey down too? If thats the issue then you should be able to gently put something like a small screwdriver up at the rear of the grip (parallel to it to) to reset the hammer forward just gently wiggle the screw driver around. The hammer spring and its housing should be out first of course. Be careful not to jam the sear spring as you don't want to bend the sear at all. Don't force it.
@BorelessAirsoftАй бұрын
Can you rig it so one hose cools down your neck for hot summer games too?
@DucknDiveAirsoftАй бұрын
Lol I'm sure all things are possible but that would put less air to your eyes.
@BorelessAirsoftАй бұрын
@@DucknDiveAirsoft Agreed. Great unboxing review!! 😁😁
@Car_Edits9999Ай бұрын
Is HPA the same thing as Co2? Pls see this comment😢
@DucknDiveAirsoftАй бұрын
Definitely not the same. HPA is high pressure atmosphere (air). Co2 is well Co2!
@Car_Edits9999Ай бұрын
@@DucknDiveAirsoft tysm
@Car_Edits9999Ай бұрын
@@DucknDiveAirsoft was that pistol a hpa?
@Car_Edits9999Ай бұрын
I have a co2 and I’m looking everywhere online can u help me find good price for under $200?
@DucknDiveAirsoftАй бұрын
Your looking for an HPA setup?
@GreensofterАй бұрын
I got one of these and I found that it is super heavy and sometimes slows my gun down, should I just get an aluminum one?
@DucknDiveAirsoftАй бұрын
The outter barrel is aluminum and doesn't move so it shouldn't slow down the cycle. Is it catching or not fitting well?
@GreensofterАй бұрын
@@DucknDiveAirsoft I got the airsoft masterpiece steel outer barrel and stock Mauri spring could it be to spring?
@DucknDiveAirsoftАй бұрын
@@Greensofter if you have the stock slide I wouldn't use a stiffer spring because it can crack the stock TM slide. An aftermarket aluminum slide can handle a stronger spring which could potentially help it cycle better but it depends why it started not cycling well in the first place. The actusl outer barrel itself shouldn't effect your cycle unless it's not fit well.
@GreensofterАй бұрын
@@DucknDiveAirsoft alright I will order a new recoil spring, what will be the best one. For short stroke
@EvgeneXIАй бұрын
Good advice for life in general. Listen to the instructions you are given.
@DucknDiveAirsoftАй бұрын
😂 Yes!
@TagrixАй бұрын
Where is this field?
@DucknDiveAirsoftАй бұрын
About 45 min North of Edmonton Alberta
@TagrixАй бұрын
@@DucknDiveAirsoft cheers
@gerardov.99302 ай бұрын
What gb shell did you end up using?
@DucknDiveAirsoft2 ай бұрын
It was some random one a friend gave me honestly not sure what it came out of. Trial and error turns out to be a big part of tech work sometimes.
@gerardov.99302 ай бұрын
@@DucknDiveAirsoft ah gotcha, was wondering since a buddy sold me a vfc m27 body with no gb shell. so I wanted to know what you happened to use since i ordered an f2
@twingarlic2 ай бұрын
I love this field
@DucknDiveAirsoft2 ай бұрын
It is a great field! 😁
@nikolausparczen87352 ай бұрын
Lol dang
@DucknDiveAirsoft2 ай бұрын
I know right. There was more I could only fit this into 1 min 😂
@nikolausparczen87352 ай бұрын
@@DucknDiveAirsoft lol amazing
@christianbellamy87262 ай бұрын
"THANK YOU FOR BLEEDING OUT" is crazy
@airsoftaxolotl21402 ай бұрын
Duck jun 8 or 9 can we play each other? In taz edmonton. 12am to 5pm or 4pm😊
@DucknDiveAirsoft2 ай бұрын
I'll be at the milsim outdoors at Rampage
@nightcoreperson99722 ай бұрын
Man Airsoft looks so fun
@BorelessAirsoft2 ай бұрын
We need more HPA gameplays! 😈😈
@DucknDiveAirsoft2 ай бұрын
I need more consistentcy in the HPA rifle first lol
@BorelessAirsoft2 ай бұрын
@@DucknDiveAirsoft whats wrong with it?
@DucknDiveAirsoft2 ай бұрын
@@BorelessAirsoft random fliers and inconsistent hop as mag empties. I believe it's midcap syndrome. I've tried more then than i can count to resolve it. I have a few other tricks I may try still just need time and a 3d printer.
@BorelessAirsoft2 ай бұрын
@@DucknDiveAirsoft Mine did too with cast alluminum hop unit. Never again lol.
@DucknDiveAirsoft2 ай бұрын
@@BorelessAirsoft the upgrade hops are often not an upgrade at all actually. They are quite difficult to make work well. I've tried 4 hops, 2 barrels, alignment tricks, 2 engine and at least a dozen different mags.
@Smile951522 ай бұрын
Could you tell me what fps does AEG L86A2 LSW have? if you tested the fps.
@DucknDiveAirsoft2 ай бұрын
It's about 1.4 joules.
@Smile951522 ай бұрын
@@DucknDiveAirsoft thank you so much i like your youtube channel
@Smile951522 ай бұрын
@@DucknDiveAirsoft 1k soon :)
@Smile951522 ай бұрын
@@DucknDiveAirsoft oh i saw an l86a2 on the internet store and it said it shoots 460 and i cant find the video for it. there are only vids from 2010-2015
@DucknDiveAirsoft2 ай бұрын
@@Smile95152 haha close!!
@Mr-th5hw2 ай бұрын
So do i have to take the safety apart too or can i leave it on the frame
@DucknDiveAirsoft2 ай бұрын
I suppose it could stay with the lower frame if your lucky and the wing levers don't fall off. Once the slide is off they are sort of losely held in place. Not a terribly big step either way.
@JasonFolk072 ай бұрын
Coming from another tech great video! very informative and detailed
@DucknDiveAirsoft2 ай бұрын
Thank you!! 😁
@blackrock16543 ай бұрын
That was a really good video. I enjoyed watching
@DucknDiveAirsoft3 ай бұрын
Thank you! Appreciate the comment ☺️🙏
@TotshotAirsoft3 ай бұрын
Helmet camera is a cool idea How come you got the runcam orange in orange instead it black though?
@DucknDiveAirsoft3 ай бұрын
The first one I got a while back was orange because of availability. This time I just stuck with the same 😆. It didn't make a difference to me because I have my housing covered in Multicam vinyl anyway so you can't see the camera color haha.
@TotshotAirsoft3 ай бұрын
@@DucknDiveAirsoft fair enough
@BrazinBull3 ай бұрын
can't wait to go, i'm going in may so i'm excited for that!
@jacobrideout32143 ай бұрын
Sounds like you are near end game so they unload the arsenal perhaps? 😅
@DucknDiveAirsoft3 ай бұрын
Actually this was probably about 1 hr into a 2 hr segment haha.
@jacobrideout32143 ай бұрын
@@DucknDiveAirsoft hehe gotchya bro. I've only played paintball in forested areas. Would love to try it. I'm a sucker for shooting friends and the warfare that comes with it. Thanks for the reply!
@robertjraines3 ай бұрын
Anyone else here for the mosquito?
@TotshotAirsoft3 ай бұрын
🤣
@TotshotAirsoft3 ай бұрын
🥚
@TotshotAirsoft3 ай бұрын
Clean
@DucknDiveAirsoft3 ай бұрын
Thank you!!
@TotshotAirsoft3 ай бұрын
Brrrt
@elvissakanovic61443 ай бұрын
How would you shim the engine... I have the wobble issue ! 😅 ... what is the alternate?
@DucknDiveAirsoft3 ай бұрын
You mean back and forth slop? Polarstar has shims that go around the holes by the head of the unit. You can try those. I also thought of 3D printing a plastic shim shaped like a cylinder so you can slot it behind the engine body and fill any gap to prevent it from sliding. polarstarairsoft.com/products/gearbox-shim-kit Good luck!
@elvissakanovic61443 ай бұрын
@@DucknDiveAirsoft yes ( back and forth ) . No problem ordering the polarstar shims. But they bill it to much by sending it to croatia 🤣 i mean probably il do it in the end. Just wanted to hear a alternative solution. Thnx anyway👍
@tacticalwolf-jb8cp4 ай бұрын
is rampage open already???
@DucknDiveAirsoft4 ай бұрын
April 13th Saturday 10am is their first date planned. Follow their Facebook for updates incase that changes due to weather or something.
@OwMo43 ай бұрын
@@DucknDiveAirsoft I saw that! im going! and that's gonna be my first time outdoors! (just saw it was in edmontom, I'm in Calgary)
@DucknDiveAirsoft3 ай бұрын
@@OwMo4 sweet hope you enjoy it. Sunday will see more airsoft usually. Saturday guys go too but typically not as many. In the Edmonton field I mean (I'm not sure how the Calgary field is).
@BorelessAirsoft4 ай бұрын
Looks good! Does it fit an SSD too?
@DucknDiveAirsoft4 ай бұрын
I havent checked but would be a interesting SSD enclosure lol.