Wow,this is probably the best video I’ve ever watched on KZfaq, the camera angle is just perfect, I mean perfect, thank you so so much
@daveknowles8632Күн бұрын
You are awesome to watch and very informative. I have so many question for you. I am just getting into everything. Just bought a MT-1502.
@HeartHustlePrintingКүн бұрын
Awesome!!! THANKS FOR WATCHING!! Let me know if you have ideas for a video.
@joshuac98776 күн бұрын
Sup bro great job can you tell me were you get the magnetic strip for the machine please and thanks?
@HeartHustlePrinting3 күн бұрын
Thanks for watching. You can buy it at Home Depot or Lowe’s
@joshuac98773 күн бұрын
@@HeartHustlePrinting thanks alot!
@Courtney-d1t8 күн бұрын
Quick question. You’re saying 285 but putting it on 385. Is it 385 correct I am new to this? First time using it.
@steve-vx3lx13 күн бұрын
roland and hp has had a baby
@lizmorgan915513 күн бұрын
what do you have the cap frame size (x size and y size) for the embroidery frame setting?
@lizmorgan915513 күн бұрын
thank you!! so helpful.
@cherylcampbell99416 күн бұрын
What size needle? I keep getting thread breaks n the need doesn't sew good on the seam?
@HeartHustlePrinting15 күн бұрын
What machine are you using?
@roseelston886617 күн бұрын
Hi Joe, I was trying to find a link to your digitizer, but I don’t see him down there. Can you post that thank you.
@yanirapena203917 күн бұрын
The best explanation, thank you so much!
@syltoy274518 күн бұрын
You mentioned your digitizer, but I didn't find his name /number below.
@analauravela475819 күн бұрын
Hi. What needle do you use?
@sweetliliane20 күн бұрын
Is LXI the same as flexi?
@khouavang324220 күн бұрын
Wow I am been an embroidery sewer for 25 years..I learn one trick from you by doing hats. Ricoma emb. machine looks very complicated for threading and adjusting the tensions. Maybe you like it. Barudan is use friendly for threading. Both machines sewing are equal good quality.
@rustydrake182826 күн бұрын
what is ur 3 year thoughts on the press? I'm about to purchase a press and would like some impute
@HeartHustlePrinting26 күн бұрын
Use it everyday. Message me on IG I’m printing right now.
@GOLDVIOLINbowofdeath26 күн бұрын
Where can I get one of those I love desert shirts?
@stitchartembroidery29 күн бұрын
Great Video thank you
@lorenzostewart9185Ай бұрын
I have a the same machine, how do I trace the design slower like on the mt1501? Where it moves slowly showing exactly where the design will go?
@HeartHustlePrintingАй бұрын
On the 6 head unfortunately you cannot do it.
@lorenzostewart9185Ай бұрын
@@HeartHustlePrinting thanks much
@jkj10Ай бұрын
Do you wash with cold or warm water? What lamp do you use for lighting, how long do you light it and what’s the distance between the lamp and the screen?
@MazeartshopАй бұрын
Thanks man I learned a total life hacks 👏👏
@darlenehermesmann4753Ай бұрын
Great info! Can you tell me why you use the adhesive spray instead of tape? Does it leave any residue on the item?
@MrSamisue27Ай бұрын
Interesting. You didn't use water or steam...or pull down hard while hooping (as shown by ricoma) and yet yours come out just fine....I think that's part of what makes learning these machines so confusing is there is so much variability in how people do things and what works for one, doesn't work for another. This leads me to believe we as individuals learning our machines need to try ALL the techniques to find out which one works for us!
@JasperOFlanigan-fb5lvАй бұрын
In true Army style there are no consequences. It’s not a sucker punch contest. You wanna settle it like men? Let someone be in a position to throw hands as well. Too many people hyping a coward who didn’t have the balls to stand toe to toe
@StraightOuttaContentАй бұрын
Hey, I sent an email last night if you are still interested in the TXF-300. We can still offer you the FLASH sale, just let me know.
No matter what I do I keep hitting that metal strap. Design is less that 2 inches tall. I've made design smaller, not hooped AS close to the tab, adjusted placement to the very edge just before it turns red (on the outline) and it's STILL hitting the strap....What am I missing here? Also, would it be helpful to put a layer of water soluble stabilizer on top or is that pointless? Appreciating your videos VERY much, thank you for putting these all here for us to be able to figure this learning curve out! <3
@HeartHustlePrintingАй бұрын
No water soluble needed. Send me file so I can look at it. [email protected]
@neyengwieregina232Ай бұрын
Good work. Interested in your videos
@tristanwayman4027Ай бұрын
Great nips!
@TrueBluDesignsАй бұрын
I used your link to start a free trial of Yo Print. Just finished the Demo with a rep. I think I'll be switching from Printavo! Thanks for the referral!🙂
@HeartHustlePrintingАй бұрын
Awesome!! Glad you liked it. Use link and get a %off
@lavernebillups3182Ай бұрын
😊hello joe
@jessiedejongh6837Ай бұрын
Thank you very much! I have an EM-1010 for 2years, and you teach super. I learned something today. I’m not an expert on my Ricoma jet, but I’m continuing watching you to learn more 🙋🏻♀️
@HeartHustlePrintingАй бұрын
Thanks for watching. Glad you learned something in this video. Make sure you clicked the bell to be notified when I put out new videos.
@maljnaey7634Ай бұрын
hello my brother , when i use CMYK Dual , How much ink is enough to run out ?
@HeartHustlePrintingАй бұрын
You can run it till it runs out. Then put in the new cartridge and it wont miss a beat
@maljnaey7634Ай бұрын
@@HeartHustlePrinting how many metter CMYK ?
@LovebitescreationsАй бұрын
My Man you saved me !! We have a 1501 and I had left my phone on the side and it blocked the carriage and got the 'No Needel' Thank you so much ! Kelly
@HeartHustlePrintingАй бұрын
AWESOME!! Glad this video helped you out. Don't forget to subscribe and click the bell to get notified when I put out new tip and tricks. Joe
@frankcurrentii6844Ай бұрын
Great video! What do you clean the loctite temp spray nozzel with? Having trouble with the spray leaving spray glue spots.
@zgagatwet1221Ай бұрын
love it
@DawnAdolfssonАй бұрын
can you use heat press plate on wood?
@BruceLeef2 ай бұрын
Hey Joe.... in 2024 would you still recommend this ink .. ?? Thanks again just trying to get started 🎨 👕 😊
@wwjd5262 ай бұрын
Thanks
@marianietes80672 ай бұрын
Just started following and your YT channel is amazing! Im a very newbie and just receibved my MT1501 recently. Did you use a Robot clamp for the bag? TIA
@HeartHustlePrinting2 ай бұрын
No, in this clip i use the mighty hoop.. Thanks for joining the ch..
@user-bt6kh8gh9s2 ай бұрын
Why no stabilizer?
@HeartHustlePrinting2 ай бұрын
It's a structured hat, so it doesn't need it. Again, this is my preference. You can add if you feel more comfortable doing it.
@tonyabenjamin2632 ай бұрын
Do you use an outside company for your embroidery designs? Please advise. Thank you in advance.
@HeartHustlePrintingАй бұрын
No we do in house.
@jerrywashington60052 ай бұрын
How much did you charge for a tumbler?
@jjolito46842 ай бұрын
Truly inspirational! Congratulations!!
@carinabam58332 ай бұрын
how do you get your bobbin thread in the middle? mine is of to one side?
@justseamsrightlindawoodsbr29142 ай бұрын
Thank you, thank you, thank you. Best video ever. I followed your instructions and my embroidery is 100% better.
@HeartHustlePrinting2 ай бұрын
Awesome!!! So glad this video helped you.
@syedzadi58672 ай бұрын
Can you print hologram on foil in plastic
@HeartHustlePrinting2 ай бұрын
I can do Hologram sticker
@saulflorez79472 ай бұрын
What is the sewing area on that hoop?
@upwardgfx47382 ай бұрын
mine is MT 2003 8S and the knob to return needle to have numbers instead of 0 (no needle error) is not moving, how can I fix that?
@HeartHustlePrinting2 ай бұрын
If you have Instagram please send me a pic. Instagram Is Heart and Hustle Printing.
@TheZehcnas10082 ай бұрын
Do you have any videos on embroidering the side of a Richardson 112 with mesh sides?
@unleashed702 ай бұрын
Im trying to get hold of them but no one is interested to answer all of my inquiries lol they probably dont like my money 😅
@HeartHustlePrinting2 ай бұрын
Send me a message on Instagram @heart_and_hustle_printing. I'll get someone to call you if you're interested.