Acrylic One

Пікірлер

@namsoemmanson8338 Ай бұрын

Beautiful. Do you sell your products or office here in Nigeria?. I want to make use of your products. Thank you

@josefvintr670 2 ай бұрын

Hello,😀 I would also like to try the spray gun How big is the breech (bore) on the gun. Please Thank you very much

@kestasv9005 2 ай бұрын

In any case, I see that it was not possible to avoid the air bubbles

@23andreas55 8 ай бұрын

Thank you for making thus. May I ask, what is the green mold material?

@milenavanroon4922 6 ай бұрын

The green mold material is alginate from the Cavex brand.

@harshitham8793 8 ай бұрын

Thank you 🙏

@Jejakjambul Жыл бұрын

Nice sharing,,🙏👍

@prabhadavid9088 Жыл бұрын

Thank you 😊

@beatricecreations84 Жыл бұрын

😍😍😍😍

@beatricecreations84 Жыл бұрын

🤩🤩🤩🤩🤩

@Lovideos12 Жыл бұрын

If you're gonna sand any object that has fiberglass in it, wear gloves, safetyglasses and a dust mask! Otherwise your skin is going to get irritated and you're going to damage your lungs

@musmustofatofa888 Жыл бұрын

Cantik

@kadaridessouki3034 Жыл бұрын

It is amazing 👏🏻 Is it waterproof?

@kadaridessouki3034 Жыл бұрын

It is amazing 👏🏻 Is it waterproof?

@nilles12345 Жыл бұрын

Would it be possible to make a 1 time use mold for a buste? As in.. Can i zigzag cut open the alginate after 3 min? Would it be elastic enough or would it crumble after 3 min too?

@mohemmadusmankhan3378 Жыл бұрын

Would you please let me know the accelerator name and curing agent name for pmma acrylic resins

@AcrylicOne Жыл бұрын

You will find all products in our webshop: shop.acrylicone.nl/?lang=uk

@mohemmadusmankhan3378 Жыл бұрын

@@AcrylicOne please sugest names of your productd so i will search on your website

@AcrylicOne Жыл бұрын

@@mohemmadusmankhan3378 A1 - check for more information on www.A1Creatives.fun

@mercedesgarcia5808 Жыл бұрын

Es una preciosidad

@mohemmadusmankhan3378 Жыл бұрын

Please make video or tell how pmma granules can use as liqiud cold cast and mold

@Martiri____ Жыл бұрын

Mag ik vragen op welk materiaal dit gelijkend is? Is het vergelijkbaar met een kunststof of een soort gips?

@AcrylicOne Жыл бұрын

Het resultaat is het best vergelijkbaar met Gips maar dan vele malen harder.

@beatricecreations84 Жыл бұрын

Incroyablement beau 👏👏👏👏

@esraakar621 Жыл бұрын

Welk kleurstof kan men hiervoor gebruiken?

@AcrylicOne Жыл бұрын

Wij gebruiken hier onze A1 pigmenten voor. In onze webshop een overzicht van de pigmenten die we beschikbaar hebben: shop.acrylicone.nl/product.cfm?p_id=32&pc_id=&ps_id=1&lang=nl

@jealousharibo 2 жыл бұрын

Very informative, thank you. How long did it take in real time? (Minus making the clay sculpture, I'm mostly inetersted in how long it took once you started using A1).

@hironorikiyoshima3980 Жыл бұрын

It took almost 2weeks from making mold to casting with acrylic resin. Acrylic resin was easy to handle.

@UandMeGod 2 жыл бұрын

OMG I LOVE Zuri designs moulds! I have bought myself 5 or 6 of them now! I just buy them 1-2 at a time every other paycheck IF I can afford them that payday! lol But at least I am not out buying them all at once and having to live in a cardboard box! lol They are addicting to buy because there are no other moulds that come close to having the details that Zuri has! IOD Prima moulds were the ones I bought until I discovered Zuri! Anyways I am really loving that rust resin you showed! This video was done over a year ago do you know if I can get that rust resin in the US now? If so where can I get it? Thank you!!!!

@Jessica-lr7mc 2 жыл бұрын

I’d like to ask what kind of pigment can be add to acrylic one

@nathaliedavid3481 2 жыл бұрын

Another one: who is that reference lady to look for as it comes to how much A1 C is needed for each and every Zuri mold please?

@nathaliedavid3481 2 жыл бұрын

Hi Red Karin :) Would you be so kind to advise where to buy the A1 Creatives stuff as well as the Finnabair wax please?

@Gwen457495 2 жыл бұрын

Hoe is de parelmoer in een van de voorbeeldjes verwerkt in A1? Bedankt voor de hulp :)

@marcelpopescu8311 2 жыл бұрын

Când dați filmele astea mai și vorbiți ca rămâneți cu marfa în soare

@marcelpopescu8311 2 жыл бұрын

Dacă tot faceți o demonstrație faceți dracu de aproape sa priceapă lumea idioților

@lineschjlberg4066 2 жыл бұрын

Hi, very interesting video! Did you paint the sculpture in the end with silver? Or what kind of paint did you use? Thank you!

@beatricecreations84 2 жыл бұрын

incroyable

@beatricecreations84 2 жыл бұрын

j'ai une question peut on réutiliser l'alginate svp ?

@Matsakonistis2 2 жыл бұрын

Does it have conductive properties?

@Celtjuh 2 жыл бұрын

Is dit ook geschikt voor kleinere siliconen mallen met veel details? Ik zie dat er ook a1 creative is, maar dat is best prijzig.

@AcrylicOne 2 жыл бұрын

A1 is met name geschikt voor silicone mallen met veel details. Tijdens het uitharden heeft A1 een klein beetje expansie waardoor alle fijne details perfect voor weergeven.

@Celtjuh 2 жыл бұрын

@@AcrylicOne Heb je het nu over de substantie in het filmpje of de a1 creative? Beide beginnen met a1. Ik denk het eerste, maar vraag het toch maar even voor de zekerheid.

@AcrylicOne 2 жыл бұрын

@@Celtjuh je kunt gewoon A1 gebruiken. In onze shop shop.acrylicone.nl kun je een overzicht van onze producten bekijken.

@Celtjuh 2 жыл бұрын

@@AcrylicOne Ok, ik ga bestellen, bedankt!

@hmuck0188 3 жыл бұрын

You're fantastic!!!

@Gerardkrielaart 3 жыл бұрын

hoe maak ik de plastic mal ?

@AcrylicOne 2 жыл бұрын

Bedoel je de grijze mal? Deze is gemaakt van een afvoerbuis.

@DearSalad 3 жыл бұрын

Hi how long did it take to cure?

@AcrylicOne 3 жыл бұрын

It will start to cure after approx 20 minutes and is hard enough to demould and to handle after 1 to 2 hours. Curing will continue for a few days depending on the A1 object and temperature/humidity of the environment.

@blackwolf-cj7hu 3 жыл бұрын

Great work.what kind of clay did he use ?

@jealousharibo 2 жыл бұрын

at first? probably standard sculpting clay, not necessarily pottery clay.

@hironorikiyoshima3980 Жыл бұрын

Actually I used ordinally water based clay made in Thailand. but It was slightly too fine glanded easy to clack...

@beatricecreations84 3 жыл бұрын

C'est génial Karin

@claudiu8376 3 жыл бұрын

Can i hard coat EPS/XPS without fiber glass? I don't need it to be like very very strong, i just want the corners not to round when i press them..

@coenvanveen3618 3 жыл бұрын

It could work depending on the density/hardness of your EPS/XPS, the thickness of the A1 layer (minimum 3 mm) and of course what kind of external force the object has to withstand. For outdoor use we would always suggest to use Triaxial Fibre reinforcement as the EPS/XPS might expand and contract as a result of thermal influences. I would suggest to sent us an email ([email protected]) If you would like to discuss further.

@claudiu8376 3 жыл бұрын

@@coenvanveen3618 OK! Thank you very much!

@creared5058 3 жыл бұрын

Wauw really wauw

@beatricecreations84 3 жыл бұрын

j'adore le rendu et franchement j'ai fais 2 fois ma main c'est spectaculaire

@beatricecreations84 3 жыл бұрын

Je vais essayer aujourd'hui.. j'espère y arriver

@DINHVANTAM-QTRI 3 жыл бұрын

Your video is awesome. Please visit and support me. I also work in art. this is my video. kzfaq.info/get/bejne/a-CaZZCAsa-shZs.html

@user-nr9dg1py4h 3 жыл бұрын

Интересный опыт. Очень сложная работа, но она этого стоит. Браво.

@hironorikiyoshima3980 Жыл бұрын

Спасибо за комплимент!

@beatricecreations84 3 жыл бұрын

merci pour vos vidéos explicatives

@creared5058 3 жыл бұрын

Super vet gedaan!!

@beatricecreations84 3 жыл бұрын

j'adore de trop:!!!!!! fantastique

@beatricecreations84 3 жыл бұрын

super

@SophieDufortArt 3 жыл бұрын

It picked every single detail! Amazing! <3

@beatricecreations84 3 жыл бұрын

Superbe

Ең жақсы KZfaq

Пікірлер