**** To be fair, please note that I have never used a laser engraver/cutter but am in the research phase of getting one...maybe.*** What I don't want to do is to get a "starter" machine, only to realize that I need something more. What's holding me back right now are the price tags. Also, I emailed xTool customer support asking if they will be selling the Ultras on Amazon. They responded with a "no plans to list it on the Amazon platform now". I don't know if that's a "never", or just a "for right now". I have a decent gift card balance with Amazon which would help offset the purchase price. With that said, all of the video reviews I see here on KZfaq are very well done, including this one. No offense, but the problem I have is that the reviewers have either received a "free" Ultra, or they get a kickback of some sort. Since the live reveal of the Ultra, I have searched far and wide for a 100% unbiased review. So far, I haven't found any. The only negative comment "in print" that I have read said that LightBurn can be used, but is not fully functional on the Ultra. LightBurn appears to be the preferred industry standard.
@SoaringRedEagleКүн бұрын
whats with that massive mask...😅😂🤣 I never wear anything (eye).. never had any issues.(No safety)
@cykovisualsКүн бұрын
Great for an EDC valet on the nightstand or dresser.
@TheReformationWoodshopКүн бұрын
For sure 👍🏻
@conniq15852 күн бұрын
The IR laser will also work on the S1 correct? If im not mistaken, i believe that head will allow you to engrave most metals?
@TheReformationWoodshopКүн бұрын
XTool sells an IR module that works specifically with each machine and aren’t compatible across the two lasers.
@anthonywalters88092 күн бұрын
Hey, I’ve seen some people stain before and some after hanging the beam. Any reason you chose before? Asking because you have to fasten the beam, then fill and putty the hole. Does the stain hold after that?
@TheReformationWoodshop2 күн бұрын
Staining after would be best to conceal fasteners and putty for sure, often times folks just trim it in a way that hides the screws. So that’s always an option 👊🏻
@MRrwmac2 күн бұрын
Handy items for our woodworking. Especially like the inspector peeping around the corner so she can report to the boss what Daddy’s doing.
@TheReformationWoodshop2 күн бұрын
🤣🤣 always!
@mariobear46982 күн бұрын
Thank you
@TheReformationWoodshop2 күн бұрын
No problem!
@ProChaos5142 күн бұрын
If you don't care about looks, this stuff is awesome, if you want a clean look, buy the sticks of aluminum. I'm yet to see a system that looks good with this stuff. -Sincerely a dude that sells pneumatics for a living.
@TheReformationWoodshop2 күн бұрын
You’re right, it could be prettier. I’ll check out the aluminum option. 👊🏻
@monkeysbud36122 күн бұрын
4500 dollars 💲💲 😱
@TheReformationWoodshop2 күн бұрын
Definitely a hefty price tag
@digitaldoom35933 күн бұрын
Bought mine the Night they live streamed it just waiting for my shipping email.... the wait is brutal
@TheReformationWoodshop2 күн бұрын
Good luck when it arrives!
@gtasandman3 күн бұрын
lol ive noticed facebook market with them flooded at 50-60 dollars but its been sitting at lowes for 20 dollars for a month now.
@TheReformationWoodshop2 күн бұрын
You gotta love it!
@magnoliaoakswoodshop3 күн бұрын
Hi Markis, great video! I love the xTool lasers and look forward to learning more about the F1 Ultra. Already have the P2, D1, S1, and F1 so PROBABLY need to go ahead and complete the set...
@TheReformationWoodshop3 күн бұрын
That’s crazy that you’re working with all of them! Every-time I wanted a new one I got rid of the old one 🤣
@ShyneflowLC3 күн бұрын
To complete the set you'll also need the M1 as well... can buy mine 😜
@Lauren-ez2gd3 күн бұрын
How tall did you make this?
@henryskinner10925 күн бұрын
I need to weld something and I am not going to pay $150.00 for someone else to weld. I am gonna get me one. Thank you, Stay Safe, and God Bless. BTW I have never welded anything and I am 75 years young.
@TheReformationWoodshop5 күн бұрын
Good luck!
@lalathebenificent13355 күн бұрын
Can you add wheels to the bottom?
@TheReformationWoodshop5 күн бұрын
Absolutely! There are a ton of wheel options that can mount under the wall or to the face to make it mobile.
@2bshared5406 күн бұрын
Hi, love your video. How do you cut the different shapes around the images? Thanks
@Pasakoye7 күн бұрын
I'm gonna try doing something like this with a coping saw and files.
@TheReformationWoodshop7 күн бұрын
That’s definitely doable! Good luck.
@KittyNinjas9 күн бұрын
The man has talent indeed!
@TheReformationWoodshop5 күн бұрын
Greatly appreciated! 👊🏻
@alshaw94209 күн бұрын
gng
@michaelhall34859 күн бұрын
We have a new PAPR design coming on the market soon. Would love for you to try it out when we get through certification. MicroClimate Air3.
@marilynfranzua48529 күн бұрын
Hi, which one would you say is best for jewelry engraving?
@TheReformationWoodshop5 күн бұрын
I would say the F1… but if you really want a good Jewelry option XTool just launched the F1 Ultra and it does really deep obvious engravings on all materials including metal.
@mariahrt111710 күн бұрын
We are getting ready to do some faux beams. Thanks for the simple video with your personal tips!
@TheReformationWoodshop5 күн бұрын
Glad it was helpful! Good luck!
@adamkreuz906810 күн бұрын
I was wondering how accurate this was or if it was a gimmick. Seems pretty darn useful! I am so bad with numbers
@TheReformationWoodshop5 күн бұрын
It really has been great!
@Bobapuppy90811 күн бұрын
Great video! I have hollow boxes in our front porch that is not touching the slab. I caulked around it. Now im not sure if i did the right thing. Would that trap moisture and lead to mold growth?
@jaredmcdermott81169 күн бұрын
I would think so. Many people use a nickel.
@mckaymnm11 күн бұрын
i just pulled mine out after sitting on it for 6or whatever months its been. i'm guessing the laser is how you turn it off. looking at the side i'm not positive i turned it off though. help?
@TheReformationWoodshop11 күн бұрын
Yes, the laser button does turn it off all the way, but your measurements remain on the OLED display. Even after your battery is fully dead, they’ll still remain on the display. That science is above my pay grade lol.
@LorenaOlvera1112 күн бұрын
For jewelry which one is the best?
@TheReformationWoodshop5 күн бұрын
I would say the F1… but if you really want a good Jewelry option XTool just launched the F1 Ultra and it does really deep obvious engravings on all materials including metal.
@MrDavidisdaboss12 күн бұрын
Do I get one of his shit filled diapers in the box ,too?😂
@4huntinfun12 күн бұрын
Unsubscribed.
@jack611612 күн бұрын
Shut up
@rudyrafferty590513 күн бұрын
I love it nice job and for the couple of negative comments go look in the mirror and try and convince yourself your better off with Biden then when Trump was president. I’ll wait lol
@ScottS-gc3wk11 күн бұрын
Plenty you name 1 thing trump gave you and don’t say tax breaks there was none only for the rich and inflation is his and also gas prices nope president has no saying on what gas prices are going to be so there is your 3 points you would give stop believing the lies you are told
@ScottS-gc3wk11 күн бұрын
Funny how you people worship someone who has never done anything for you shows how pathetic this generation is you are either real old at a 30 something trying to be relevant grow up buddy an realize no president or politician will ever do anything for you or the middle class working people anything you say is a false
@PierogiInspired13 күн бұрын
Nice dart board/cutting board
@Gladly12412 күн бұрын
Another example if the tolerant left
@Schwab.travis13 күн бұрын
Disgusting
@Speed-ku6jx13 күн бұрын
Trump 2024 baby!
@Willtrax11 күн бұрын
For sure 2024 Trump will be back in office!!
@MrSirlulzalot13 күн бұрын
Very cool.
@bradtimms20513 күн бұрын
I just ordered this sprayer to stain a really big privacy fence. Thanks for the video.
@TheReformationWoodshop13 күн бұрын
Good luck!
@michellemaynard204713 күн бұрын
Thank you. Great video. Do sell plans for those of us not so inclined to figure all of that out.
@TheReformationWoodshop13 күн бұрын
I don’t have plans for this one unfortunately. Sorry!
@joesa699814 күн бұрын
Can I use it with primer ?
@TheReformationWoodshop13 күн бұрын
Yes!
@maryelizabethbush2114 күн бұрын
Found a scroll saw at a thrift store. I didn't know what it was or what one does with it. But now I'm glad I have it. This is going to be fun!
@TheReformationWoodshop14 күн бұрын
Very cool! Good luck!
@dylandepuy371514 күн бұрын
No handle
@TheReformationWoodshop5 күн бұрын
Add one!
@Zamboni-080515 күн бұрын
You must have never used a good quality countersink such as the Amana Tool 55227 Carbide Tipped 82 Degree Countersink Set. Those HF will not even come close to thw quality and sharpness of the Amana
@BenYarcho-dd3vv15 күн бұрын
Anyway to get a material list for this? The plans on kreg just say (1 plywood) or (1 maple board 1x4) but the cut list suggets itll be more than that
@user-cd9js9eu7m15 күн бұрын
I use them to store my singer sewing stuff in I put little feet on them also use them to store my silhouette cutting stuff in I spray paint them to match my room and put decals on the it won’t let me leave a picture are I would show you I also bead flowers I use one for them I have four right now
@HazeDragonXx15 күн бұрын
I’m 30 been working with wood for about 10 years
@mslateshashaw17 күн бұрын
This is not easy because the average person does not even own these sorts of tools❤
@scottutube117 күн бұрын
Good stuff. I would: Use a select/premium grade of pine. Use a sanding sealer before stain. Glossy? That's not natural for a wood beam. I'd go with flat, satin at the very most.
@alexpalette17 күн бұрын
My favorite of the woodworking tools was the ratchet set.
@spinxt17 күн бұрын
When you measured the thickness of the butcher block, it read 1-7/16. I'm not aware of a butcher block manufactured in that thickness. I question this device's accuracy.
@jerryw522517 күн бұрын
My favorite is the one you didn't talk about. It's the glue cap/stand for the work bench. Thanks.
@jerryw522517 күн бұрын
I have found this to be so true. Making jigs that match vacuum connectors for those projects down the line that require a hose fitting. Just label said fitting with its size. Thanks