this helped me sooooo much, thanks a lot from Germany!
@craig61196 күн бұрын
I don't think that noise is from the engine. Something from final drive maybe. Something rubbing off the chain ?
@craig61196 күн бұрын
Sorry didn't see your post
@DavidGarside6 күн бұрын
@@craig6119 . It was the speedo head! Thank you.
@carenthusiast36628 күн бұрын
Love it! So many iconic cars & Ford's were so popular back in the day... think i spotted a Peugeot 205 GTi towards the end 😊
@Didomum8 күн бұрын
thanks for putting up both video it was great watching them. being stateside now I don't get to see much from home.
@DavidGarside8 күн бұрын
Thank you. Are you from this general area ? If so, there's other videos from around Newbury, which I've added too. Glad you liked them. 😊👍
@skyhawkthegerbil794311 күн бұрын
You're a pleasant chap to listen to, David. Thank you.
@DavidGarside11 күн бұрын
@skyhawkthegerbil7943 . Thank you too! 😊
@heartstation845911 күн бұрын
Thank you
@mpwheatley12 күн бұрын
Fantastic photos There are plenty of Andover town centre from pre-1973 but hardly any from the second stage of redevelopment in the late eighties so these are great, thank you.
@DavidGarside12 күн бұрын
Thank you for your kind words, it's much appreciated! 👍
@mpwheatley12 күн бұрын
These photos are like gold dust. So few of Andover from around the early eighties. I had no idea that you could drive all the way down London St this late, I thought it had been blocked off when the town centre was redeveloped in the 1960s. I moved to Andover in 2003 and I am fascinated by the massive changes that were made to the town. Thank you.
@BooHooRocketShip16 күн бұрын
So grateful for this. Thank you David ❤
@dougreed225721 күн бұрын
It actually makes photo's look authentic,we wouldn't want photo's to be HD, better this way😊
@newsgetsold21 күн бұрын
Didn't mention the exact type of bulb. I think it's a H4?
@DavidGarside21 күн бұрын
@newsgetsold . Yes, I think it is, but should tell you in your manual.
@termisium370628 күн бұрын
My side indicator gets water trapped in it after a wash. What can i do about it?
@DavidGarside28 күн бұрын
@termisium3706 Check to see if there's a crack or split anywhere, and if there's a seal missing where the bulb holder connects. If so, you'll probably need to replace it.
@milee8184Ай бұрын
Are you still live in Andover?
@DL-go1xhАй бұрын
I used to work here. In the Cambridge Bld. Third floor was the Newcastle College Marketing Dept. It was the think tank of the early campaigns and upwardly put the college on the map. Headed by Max Hamps and Sandra Gowar, PR Team. Circa 1992.
@DavidGarsideАй бұрын
I was there in the 1960s, so quite a long time before you, so there must have been many changes. Did you have access to the roof area?
@missredumbrellaАй бұрын
Winton school bridge used to sway in the wind ha ha
@roaming.spectre.Ай бұрын
It’s here newsagents
@user-hf5ju1yw9eАй бұрын
Thank you so much for this video
@nevillegoldsmith9570Ай бұрын
Brilliant video David, much better than Hitchcocks one as you included a number of sensible tips and great close-ups of positioning and fitting all the O-rings. You are obviously a methodical and experienced old school mechanic. Many thanks.
@DavidGarsideАй бұрын
@nevillegoldsmith9570 Thank you Neville, much appreciated. 👍🙂
@stevendudley7530Ай бұрын
Perfect video, just purchased gold star exhaust now can’t wait to fit it on my 500.
@jean2740Ай бұрын
Now that's the newcastle I remember and worked in as a girl 😢
RIP little ones😢 What's that infernal clicking noise in the background ?
@DavidGarsideАй бұрын
@joeblogs-vx4ep . The clicking noises at the Cemetery were workmen carrying out maintenance and repairs. The rustling noise is the wind on the microphone, it was a bit windy at times there! Sorry if was distracting. Thank you for watching.
@bahamansour3178Ай бұрын
Dire straits ❤
@madhanakumar6155Ай бұрын
Hi nice video how much does this cost. Delivery period.
@DavidGarsideАй бұрын
Hi. If you look on their website, you'll get an updated price. It will be different now from when I bought this one. There are other suppliers too, which will come up if you google it. Thank you for watching and your question.
@Jess-wk5joАй бұрын
I have question where did cilla black family get her headstone from?
@DavidGarsideАй бұрын
I have no idea I'm afraid. I'm sure that info will be found in one of the many articles available on-line about her life and death, or from her fan club site. Thank you for watching. 🙂
@Jess-wk5joАй бұрын
@@DavidGarsideis it their way of asking. Please
@rachhan17 күн бұрын
@@Jess-wk5joil look next time I’m there it usually says the makers on the side
@Jess-wk5jo7 күн бұрын
@@rachhan1 ok Rachel x
@jonathanhall7815Ай бұрын
My grandfather used to work in that signal box before he retired in the late 1950's.
@kennethpointer7229Ай бұрын
Stupid question which position is on and off
@DavidGarsideАй бұрын
Not at all. The cold start position is when the lever is pressed down. I did find though on my particular bike, that it wasn't needed unless very cold, but may need it pressing until it warmed up a bit. Hope this helps.
@kennethpointer7229Ай бұрын
@@DavidGarside thanks for the video. Just changed choke over , just need to sort carb out. Running a little rich.
@kennethpointer7229Ай бұрын
Quick question. Did you have a problem with carbon on spark plug. Which plug are you using thanks. Any help would be appreciated
@DavidGarsideАй бұрын
@kennethpointer7229 . Hello again. No, never had any problems with mixture setting or plug fouling. I did also later change to a plug from Hitchcocks (possibly Iridium, cant remember for sure though) , but don't really think I noticed any difference. I took my time to set the idle and tick over settings and it ran lovely, as long as you don't let the fuel get too old. 🙂
@sidensvans67Ай бұрын
Thank you for this window into our past .
@jasonbevis6391Ай бұрын
I was 7 years old, on this very road, I ran out into it and was run over, I was in hospital for from what I was told at least 2 weeks. I was very lucky not to have died there.
@DavidGarsideАй бұрын
Yes, quite a busy road there. I'm pleased you came through it ok. 👍👍
@slimbo92 ай бұрын
Like another world now ! Bagleys at the end 👍🏻
@whitleybaymemories2 ай бұрын
Great video. I've just shared it (with credit) on my whitley bay memories group on fb
@DavidGarside2 ай бұрын
Thank you. I'm pleased you like it and I hope others do too. Much appreciated. 👍🙂
@Andy-wx4wx2 ай бұрын
Went a bit mad with mine, just cut them off and replaced with new. At least I know for next time. Good video!
@justaman17212 ай бұрын
Give it 200 years, Andover will bounce back!
@EenFan2 ай бұрын
Thanks, you helped me a lot!
@DavidGarside2 ай бұрын
Glad you found it helpful. Thank you for watching. 👍🙂
@mattypearson26832 ай бұрын
any one have any photos of " Isabella Street " used to run down from St John rd - st Johns Cemetery ?
@mattypearson26832 ай бұрын
wow!!! that first photo is of Mary travelian school ! the infants was a seperate school to the left of that block - i went to both 1967-72 ish - i remember our sports day on that grassed area ❤❤MEMORIES !!
@alex-E7WHU2 ай бұрын
@3:10 is that the Gibraltar rock ?
@DavidGarside2 ай бұрын
It is. 👍 I have another video from around the area on here too.
@rossdaveyentertainment2 ай бұрын
So the slipping noise you're demonstrating there -- was that the chain jumping slightly? Because that's what I'm dealing with at the moment on my 400. The front chain guide is completely worn but the main thing I'm trying to figure out is why my tensioner adjustment nut is able to rotate both directions without snugging up and the blade itself has very little up or down movement. Trying to figure it out before I pop the head so I can have all the parts lying in wait..
@DavidGarside2 ай бұрын
My chain wasn't slipping on the sprockets, but the play in the chain was allowing it to suddenly jump forward when the tension was released. Hope this helps.
@rossdaveyentertainment2 ай бұрын
@@DavidGarside It does, thanks. I suppose that's what's happening here too. Back to it I guess
@alanjones93812 ай бұрын
Would you have a video to put a supersport trigger back together????
@DavidGarside2 ай бұрын
Hi Alan. I don't I'm afraid. This was just me putting my old one back together. Sorry! I hope you manage to get it done OK. Thank you for watching and for asking though.
@thomasbollen93782 ай бұрын
Great video extremely helpful. Just saved me 😂
@keithrh75992 ай бұрын
No sign of graffiti and litter, maybe photographer avoided those places ?
@DavidGarside2 ай бұрын
No, my brother took the photos that were relevant to my memories. If there'd been graffiti etc, I'm sure he'd have included it for me! 👍☺️
@qaisermehmood80102 ай бұрын
Thank you sir I saw it very easy and helpful video amazing sir ❤❤❤❤❤❤❤❤❤ tomorrow i will be try thank you so much
@DavidGarside2 ай бұрын
When you've finished the job, before driving the car make sure you press the brake pedal a few times to pump it up. Take your time so you don't forget anything. If you're not sure, take it to your local garage to get it done as it's a safety issue. Good luck. 👍👍
@qaisermehmood80102 ай бұрын
Hello sir i hope you are very well can you make a video front break pads change if you have any video please send me link thank your videos very helpful ❤❤❤❤❤ thank you
@DavidGarside2 ай бұрын
Good morning. I've posted a link below to my video on cleaning the caliper pins, which does involve removing and refitting the brake pads. You would also need to remove the brake master cylinder cap and push the caliper pistons back in too. There is another video on here by someone else showing how to do this. Thank you for watching. kzfaq.info/get/bejne/bLKVe5uCncm1ZZs.htmlsi=HS-SVNDeLCB5c_YF
@qaisermehmood80102 ай бұрын
Thank you so much sir i appreciate quick response ❤❤❤❤❤ love you
@HongKong.Shenzhen.2 ай бұрын
Nice place
@HongKong.Shenzhen.2 ай бұрын
Very good photos!!
@docproc85082 ай бұрын
I miss those yellow buses. Made the place unique, at least for me. It shocks me to see how “old” these look yet I was there!😮
@DavidGarside2 ай бұрын
Yes, me too. Part of my childhood growing up in Newcastle was riding on these old buses including the Trolley Buses too. Great memories!
@cipriani96073 ай бұрын
David..after 5 years when you post this video..now 2024 I used your advaces and done the job !! You are a star in 2024 as well...bless🙏🙏
@MLAM1683 ай бұрын
My dad bought a TV from Bakers in 1990 I think, a massive 21" Sony Trinitron TV with a SCART socket, he may well have saw you on that day. Amazing how much Andover has changed, saddest part is now there is hardly any shops.
@DavidGarside3 ай бұрын
Yes, that's a possibility as I was there most days. Good old tv's the Trinitrons, hope it's still going strong! 👍☺️
@MLAM1683 ай бұрын
@@DavidGarside it developed a fault after 15 years where it lost colour, we then gave it to a friend who then did some spot soldering and sorted it. Not sure how much longer it went on but knocking on the door of 20 years at least. Thanks again for the archive footage.
@DavidGarside3 ай бұрын
Dry joints, quite common on some sets. It did well, 20 years.... Well worth the money!.
@workineu3 ай бұрын
I sold my Alto recently, but I still like to enjoy your video from the road. Thanks for help and inspiration, David.
@DavidGarside3 ай бұрын
Thank you, much appreciated. Pleased you are enjoying them! 👍😊