Aftermarket regulator clips are junk 12years with my e36s and I’ve never had to pull oem bmw regulator cotter pins the way you did shown here past the middle point. A customer brought me regulator clips that aren’t bmw and they kept poping out so I’ll try to lock them in the way you did here and hope I don’t cut my hands in the process. Anyone reading this do yourself a favor and get them thru bmw and just a hard snap will pop the ball into the plastic socket and leave the clip alone no need to pull them further forward than how they were unpacked

Are the angel eyes an addition to the existing halogen lamps ?

This is fantastic work!

Nice video. My window will not go up straight, bought an entire new regulator arm still no luck.

Gracias por el video. me va a servir para instalarlos en el mio.

dont put brake cleaner on a rubber belt.

Why are you wearing flip flops?

SO NICE!!!!! Thanks You

Awesome tutorial. I'm about to swap all of my power steering hoses and reservoir.

Depo head lights are shit

great video - the clips you bought look good (at 0:22) because they have the black rubber 'buffer' part integrated, as the original BMW ones did. I got some and they didn't have them so I had to re-fit the old ones (the old black rubber parts). I'm not sure they are essential but they are probably better installed than not. Many thanks

hey mate, do you know if this shift knob will fit onto a short shifter?

I gotta do all 4 doors - this video is perfect. Thanks for the help.

Great video

That sound is so nice, defo a great upgrade. Im highly considering getting this same catback exhaust from muffler kings considering we have the same spec car. If it's alright, how much was the exhaust job done for?

Hi! Also is this m42 or m44?

thx bro I fix it

Good job bro.. I equally have a E36 wagon BMW, i need these angles eyes, how can i get it to fix it in my car?

How comes it uses atf and not power steering fluid

How many cans of paint and primer did you use ?

how’s it handling? and drastic riding difference?

What size is that spacer? I’m at the tool shop and I can’t find that spacer

The air bleeds by only turning the steering?

I was considering the same route, but then I stumbled upon another one: - jacking up - sucking reservoir empty - pulling return line (thinner one) off - closing/plugging connection at reservour - leading pulled off return hose into empty container - moving from lock to lock while engine off - keeping open reservour topped off with fresh fluid, making sure it's never empty Supposedly, once the fluid drips into the empty container the same color you pour into the reservoir, the system is flushed. Has anyone tried this with a BMW?

This is 😡

This is amazingly useful, im doing the same job and was feeling smth wrong with the mounts and luckily i went over this video and realized that i needed these spacers, keep it up mate

Very clean work mate. Thumbs up.

Good video mate. You did a nice job there. I have an E36 M3 and it's been in storage mostly the last 5 years or so. Initially the driver's door window stopped working, and it's not a failed window motor as such, it just seems to be jammed somehow. I recently moved the car to another location and to my surprise, now the left one has also jammed up.. sheesh !! When you press the buttons, you can hear the "click", but no movement. I've been told it could be a bad bushing. It's a bushing which resides between the motor and the regulator. Hopefully, I will have a chance to go in and take a look, but I'd thought I'd share my issue here in a hope that others may have had the same problem. Replacement bushings from BMW show a plastic type and a metal type, but I don't know if the metal ones are supposed to be a superseded part over the plastic or are they specific to perhaps coupe or sedan. Not too sure at this stage. What is weird is that the car has low mileage and doesn't get much use, so wear and tear is not primarily the issue. One day it worked just just fine and then the next, nothing. Just a click. The tell tale sign, was when I go to open either door and the window drop option didn't do its thing. This was the uh oh moment... Then further checks revealed the inevitable. I do have a brand new Genuine window motor ready to go in on the driver's side, but I'll have to wait till I get it open and investigate more thoroughly. I may need more parts, like that bushing I mentioned.. If any part looks suspect, it will be replaced. No good having one new and some old parts in there. Freshen the whole lot up so it all works perfectly I reckon, for the few extra bucks. It's worse having to go back in the second or third time.

yea thanks for not sharing how to connect it. Im going for another youtuber :))))

Thats not a catback lol, catback means it is straight piped from the cat

Awesome video, definately got a sub from me! Hope to see more in the future!

Theres in the trunk and holes on the side of the car jack stand on the trunk.... Wtheck. I've had my car for a long time and did not know that

Well done .

Great video! May I suggest an m3 bumper? :)

Normally I don't like the exhaust noise on these but this is 👌

Hii first yo say that de negative is brown and 12v + yellow and then when you done the installation you weld the brown and grey why?

nice e36 man! quick question, are you running spacers or pcd adapters to fit those rims? if so do you have any names or links to em?

Hi, can you tell me if these headlights fit on the bmw e36 96, but 4 doors?

Good video bro! Check mine too please 🤗

Did you notice if the steering wheel was a lot easier to turn, after changing the fluid? I have 133k n=miles on my e36, and not sure if and or when the fluid was changed

Did you delete the cat?

Bro, quick question, my window doesnt line up with the rubber frame, any advice? also it keeps popping out from the butterfly clips.

Hi mate, sounds and looks good, we are restoring a 318is coupe and was wondering if you had xforce part number/description for resonators and muffler?

Thx im going to apply this to my z3. I think its similar to e36 .

Did this to my left rear break light light today, worked well. But the break switch is still playing up so I've ordered a new one. Hope it works. P.s nice e36 you have

Hey mate how much did the custom exhaust cost if you dont mind me asking? thinking of getting one done myself

Brilliant. Thanks for making this.

Is it possible to install the angel eyes onto the original e36 headlights?

extremely late, but nice video :) think this should work for most bmws? unfortunately i don’t have an e36, i have a 330i sedan 😬

Wow! Clear, concise and to the point. Great instructional video!!