Very nice 👍 some driving videos without music or commentary would be incredible 😊
@scuderiaseliquella9 күн бұрын
@@thmartie ok check the latest video
@dylanwakley2553Ай бұрын
I’ve had both my variators replaced but I’ve started to notice the rattle again a month or 2 later intermittently, could it be the solenoid?
@IanB222 ай бұрын
yup... that'll do nicely ;) ... What cams? Any porting done?
@scuderiaseliquella2 ай бұрын
Basicallly flowed head, standard valves, 11:8 cr pistons, 90mm stroke crank, maxpeeding con rods Nord length, special cams, lightened flywheel, itb’s from gsxr 750, stand alone ecu etc
@IanB222 ай бұрын
@@scuderiaseliquella I have a similar setup (including ITB's from Yamaha R1) and larger bore, but not the stroked crank.... what Cams though? Custom? can't be the standard TS cams and reach those HP #'s??
@scuderiaseliquella2 ай бұрын
I have RJR550/785 cams installed. 0.5” lift 286 duration intake 0.46” lift 268 duration exhaust
@IanB222 ай бұрын
@@scuderiaseliquella Very nice.... that's the lift and duration that will get you the goods for sure - Enjoy the ride buddy!!
@155DTM9 ай бұрын
Hello, nice sound and clear bay! What about the internals pistons, heads, rods, valves etc? i will make a project for my 75 ts and searching best setup. Would you please share the part details?
@scuderiaseliquella9 ай бұрын
Hi you can see most of it in the forum below, id you need more details let me know. www.alfabb.com/threads/1300-gta-r-project.378577/#post-5949665 Basicallly flowed head, standard valves, 11:8 cr pistons, 90mm stroke crank, maxpeeding con rods Nord length, special cams, lightened flywheel, itb’s from gsxr 750, stand alone ecu etc
@HansvanderKooij10 ай бұрын
Ben benieuwd naar welk systeem je hebt gebruikt voor injectie en ecu ect.
@scuderiaseliquella10 ай бұрын
www.efignition.nl/c-3632985/efignition-46/ Deze heb ik erop zitten
@HansvanderKooij10 ай бұрын
@@scuderiaseliquella dankjewel, heb je de op en ombouw zelf gedaan?
@scuderiaseliquella10 ай бұрын
@@HansvanderKooij Ja en samen met Jeroen van BS-autotune nagelopen en opgestart
@arjanalfa Жыл бұрын
Complimenten met dit fantastische project! Ik ben beetje met vergelijkbaar bezig. Wat is de exacte kleurcodering die jij hebt?
@scuderiaseliquella Жыл бұрын
Dank je het is AR501 van Glasuriet lak met blanke lak eroverheen.
@thmartie Жыл бұрын
Very nice! What are you using for engine management? I see your spark plug wires being routed through the firewall and not to a distributor.
@scuderiaseliquella Жыл бұрын
I am using this one: www.efignition.nl/a-45615330/efignition/efignition-46-engine-management-system/#description
@thmartie Жыл бұрын
@@scuderiaseliquella Great to see! You've done an awesome job. Hopefully some more videos in the future. :)
@IanB222 жыл бұрын
Get that beast off-idle and out there driving boi! I started mine for the first time about 10 months ago after a 7 yr build….get emher out there running around at 1.5-3.5k rpm street driving for 20 minutes…then you can idle her a bit
@scuderiaseliquella2 жыл бұрын
That was not idle, but 2k running the cams in and adjusting the base map the EFI and ignition. Now have driven around 300km with alternating loads between 1500 and 3500rpm.
@IanB222 жыл бұрын
@@scuderiaseliquella nice! She feeling good? What cams lift and duration (if you know them)
@scuderiaseliquella2 жыл бұрын
@@IanB22 I have RJR550/785 cams installed. 0.5” lift 286 duration intake 0.46” lift 268 duration exhaust
@IanB222 жыл бұрын
@@scuderiaseliquella wow….beautiful setup
@scuderiaseliquella2 жыл бұрын
@@IanB22 and much more, high comp pistons 90mm crank, long con rods, light flywheel, 3D scanned and cnc ported head. See also www.alfabb.com/threads/1300-gta-r-project.378577/#post-8744133
@sprintn9182 жыл бұрын
Nice work! I can't wait to do the same with mine! Hopefully over this winter!