I’ve seen u jst posted. A video rebuilding the 5.3 is that because it went before or jst for extra power? Before u tune it ?
@OXCFilms8 сағат бұрын
Ooo that was due to the original engine blowing up due to hydrolocking. But at the time of the e85 install, all it had was a tune and long tubes and intake
@joeymorales171316 сағат бұрын
Have u got it tuned? Did u have to built the engine
@OXCFilms11 сағат бұрын
No the engine doesnt have to be built but you have to tune it to have the sensor function
@aaronhernandez828223 сағат бұрын
What fire extinguisher mount is that inside the cab?
@OXCFilms10 сағат бұрын
Its from desert does it
@hannahsimpson254823 сағат бұрын
Is it safe too say that when the cars at stop in drive shaking , in park shaking but in neutral smooth that this would be the problem
@OXCFilms21 сағат бұрын
Can be a possibility
@guerolil2 күн бұрын
Sick as truck!!
@christiandavidramirezgarci3173 күн бұрын
Bout work on mine tomorrow, fuck it let’s see how it goes. I’m just scared about stripping bolts and that famous pulley bolt.
@OXCFilms3 күн бұрын
Just take your time and organize everything while removing and you should be good
@youalreadyknow50393 күн бұрын
I have an ‘18… no engine mods. No headers, Cold air intake. Just a stock supercharger. I just received my NGK’s. Should I keep the stick gap? I’ve hearing they should be at .040… does that sound right ? Again, NO mods or tune. Thanks
@OXCFilms3 күн бұрын
Not surre to be honest. New era performance told us to gap them to 30
@youalreadyknow50393 күн бұрын
@@OXCFilms coo… u think that goes for mine, even though I have no upgrades? I bought some wires too. U think I should b okay without putting those boots on? Or are those wire boots for factory wires. This the first time I’ll be fking with my shii… I just don’t want to go in blind and mess things up…
@youalreadyknow50393 күн бұрын
@@OXCFilms btw, thanks for replying so quick…
@randywatson48705 күн бұрын
👌🏾👌🏾👌🏾👌🏾👌🏾👌🏾👌🏾👌🏾👌🏾👌🏾👌🏾👌🏾👌🏾👌🏾👌🏾👌🏾👌🏾👌🏾👌🏾👌🏾👌🏾👌🏾
@M5LICE6 күн бұрын
I installed mine and now i have extreme toe in
@OXCFilms6 күн бұрын
Check for bent tie rods. Or unibody damage
@JMAC4797 күн бұрын
I dig the Coyote
@vaboy_7 күн бұрын
You should shorten the rear end
@tonytmtautodetail15277 күн бұрын
Gracias compa 🫡
@OXCFilms7 күн бұрын
Ahi stamos 🤜🤛
@timothyodell52458 күн бұрын
Si kema ese yonke jajajaja
@danieljohnson84379 күн бұрын
Upgrade groundstrap.recomended. Excellent Thank you
@OXCFilms9 күн бұрын
Will do 👍
@danieljohnson84379 күн бұрын
Good stuff... 1994 Cherokee Thanks
@OXCFilms9 күн бұрын
Thank you
@JoseGarcia-yz3yb9 күн бұрын
Did the car vibrate/rattle after the new mounts were installed? I’m curious about the quality of SKP mounts
@krazykellz410510 күн бұрын
Super clean! I wish i never sold mine! 😩
@ismaelvergara564310 күн бұрын
Shoping link
@AlanGonzalez-o5c12 күн бұрын
is this the 6.2?
@OXCFilms12 күн бұрын
No its a 5.3
@shykesehart621712 күн бұрын
Damn
@chepechepedizel461913 күн бұрын
100k buikt and stock brakes no mames
@OXCFilms13 күн бұрын
Let us record your mustang or that c10
@fernandoluna507113 күн бұрын
I have the same car is a beast lol did u put black rtv only on the edges ? Or all the way around
@OXCFilms13 күн бұрын
Just on the edges
@corne667314 күн бұрын
Apparently mine just popped out out of nowhere, I have a rag in it for now. I thought the hissing sound came from the fuel pump. Ofc I couldn’t check the noise bc it would stall when I let off the gas. Thanks
@drake819215 күн бұрын
I'll take this over a hellcat anyday!!! 💪🏾💯
@israelhernandez95715 күн бұрын
Nice video
@OXCFilms15 күн бұрын
Thanks! 👍
@DaBundle16 күн бұрын
🔥 🔥🌹🔥🔥
@ArturoRosales-bv5fe17 күн бұрын
Where do the wires go???
@OXCFilms17 күн бұрын
Straight to the battery. Wired through a relay.
@dbanks899520 күн бұрын
Is it for sale
@rivi66621 күн бұрын
A1 TOP GEE! I had the exact problem and thanx to the powers that be for handing me this video! Truck is back on the road and running as it should! Good follow up on IG as well, thanx for the intel...
@OXCFilms21 күн бұрын
👍
@youngleanin112521 күн бұрын
🔥🔥🔥
@CalebTheHumbled22 күн бұрын
Bro, that thing looks sick!! I usually dont even care for duallys but the single cab makes this one look sweet. Absolutely beautiful.
@rivi66622 күн бұрын
I'm having the same problem right now. AC started acting up, #5 stopped working awhile ago. Yesterday it finally left me stranded at work and I was able to jump it from the relay to get home and the ac wasn't turning on at all. I got my V PEAK scanner for my phone and plugged it is and gave me a salad of unrelated codes from trans solenoid this and that and also fuel pressure issue P008B, as well my ABS/PARKING BRAKE lights popped on with the check light. Drove it home on limp mode. I was told that the battery was the problem considering it's 5y.o. now, put a new battery and still nothing. I jumped the relay from the 87 post to the battery to start and move the truck and sure enough still on limp mode and the codes popped back up after I replaced the battery. I will update later once I pull the fuse box and source the problem with success.
@ryanlewis7598 күн бұрын
Any updates? Literally exact same as my truck. Pulled fuse box apart and it wasn’t burnt on the backside but still thinking it’s that wire causing a problem.
@OXCFilms8 күн бұрын
@ryanlewis759 yes this fixed the issue. Truck sold but was running great after fixing this issue
@djeskandalo839423 күн бұрын
Perro su video eh la verdad grabaron muy vien y claro com detalle💯💯💯
@OXCFilms23 күн бұрын
Gracias 👍
@djeskandalo839423 күн бұрын
@@OXCFilms otro exelente video 💯💯💯
@OXCFilms23 күн бұрын
@djeskandalo8394 gracias 👍
@fiys56723 күн бұрын
Do you feel like it handles bumps/potholes etc better?
@OXCFilms23 күн бұрын
Yes big difference. The ride quality improved
@jgr443827 күн бұрын
Nice looking ride.
@TWENTYNINEJEANSS28 күн бұрын
Any driving pov of this car ?
@Mirroman2129 күн бұрын
Clean asf
@Streetstyle2129 күн бұрын
4x4 tooo 🥵🥵
@DaBundleАй бұрын
So the bed is just a kit added to a normal bed but since you got it painted it was molded on? Nice truck and is Rust Free tooo
@OXCFilmsАй бұрын
These beds only came on the trucks with the quadrasteer system
@Clintwalker85Ай бұрын
Heat the metal bushings with a torch. It slides right out. Same with the rubber bushing. I just figured it out.
@OXCFilmsАй бұрын
Good to know! We will forsure try that next time
@Clintwalker85Ай бұрын
@@OXCFilms your video for the upper and lower control arms is spot on man. Helped me a lot! Thank you!
@OXCFilmsАй бұрын
I am glad it helped out
@velossatech113Ай бұрын
Looking good! We enjoyed watching this!
@Nmatenum420Ай бұрын
Any steering stabilizer mods? My 2016 will go thru electric front ends beating on it in the mud/sand on 35s.
@OXCFilmsАй бұрын
No mods yet. Truck has been sitting for a year now
@Samuelhayden1Ай бұрын
Is your top speed 140?
@Clintwalker85Ай бұрын
What size is the strut rod nut at the bushings?
@OXCFilmsАй бұрын
I think it was a 21mm
@christianmendoza7598Ай бұрын
Did you add the RTV to the entire edge or just the spots where you pointed at? It’s my first time doing anything like this and don’t wanna mess up. Awesome vid though thank you!
@OXCFilmsАй бұрын
We added rtv just to the spots that we pointed at. We are glad you found the video helpful
@xbrobeansx7619Ай бұрын
I wonder if the 6.0 can fit in that thang
@OXCFilmsАй бұрын
Yes same thing
@alansundayАй бұрын
Big difference! Did you replace the headlight bulbs with auxito as well?
@OXCFilmsАй бұрын
Huge difference! Yes also the headlights were replaced with auxito
@alansundayАй бұрын
Awesome job! Thanks for this video!
@OXCFilmsАй бұрын
Thanks!
@Elviejon_91Ай бұрын
Do i need to take the rear caliper off just to put in new brake pads? Or can i just take the pins out for brake pads???
@OXCFilmsАй бұрын
Just pull the pins out to replace pads
@Elviejon_91Ай бұрын
@@OXCFilms hell yea thanks bro 🙏
@Elviejon_91Ай бұрын
@@OXCFilms do i just replace the pads , or do i gotta bleed the line aswell ?
@OXCFilmsАй бұрын
@Elviejon_91 we would replace the brake pads and flush out the brake fluid if it was us because the fluid also makes a difference