Пікірлер
@STP-ok7zh
@STP-ok7zh Ай бұрын
Condor for me....wheeldock, as nice as it is, you need to be off the bike to release the wheel mechanism. Condor, besides little effort to back up, no mechanical parts to go bad.
@crazylouie68
@crazylouie68 3 ай бұрын
No scraping of front fender on a ‘19 street glide special ?
@ntucker5000
@ntucker5000 3 ай бұрын
nope, my 16' RGS is just fine, and my father's RGU also had no problem.
@richpenta-id9wy
@richpenta-id9wy 7 ай бұрын
The wheel dock almost looks like a two person job. The condor looks like a better design and pretty straight forward to use. Thanks for the video as I’m in the market for one.
@C.A.MARSUPIAL
@C.A.MARSUPIAL 10 ай бұрын
Excellent thanks from Australia. Keep well.
@FreedomRider1982
@FreedomRider1982 Жыл бұрын
Beautiful Bike and Beautiful ride! I just came across your channel in my feed actually. I'm happy to support your efforts and those of other fellow moto content creators. I look forward to seeing and hearing more from you in the future ; keep up the great work and ride safe out there.
@acreator24
@acreator24 Жыл бұрын
Never said which you prefer
@ntucker5000
@ntucker5000 Жыл бұрын
Wheel dock is the one I use the most
@dlmp70
@dlmp70 Жыл бұрын
@@ntucker5000 Do you use the Wheeldock more because of that hydraulic assist? Or is there some other reason? In terms of build quality alone, how would you rate them? Thanks for the video!
@ntucker5000
@ntucker5000 Жыл бұрын
@@dlmp70 The wheeldock is easier to roll the bike on and off of. Build quality for both is amazing.
@jacobhendrickson8935
@jacobhendrickson8935 Жыл бұрын
I’ve considered having mine painted blue to match my R1 &R6. I love that Yamaha blue. Mine is a 2009. Absolutely mint. Seeing this video showed me blue does look great
@user-id8ng9eq9h
@user-id8ng9eq9h Жыл бұрын
Never saw the wheel dock before, but I have numerous Condor products and agree - getting the bike out of the cradle takes some effort. Rock solid product, but that’s the drawback. wheel dock looks like a good design.
@FatDoodee
@FatDoodee Жыл бұрын
When you installed it on the right side, did you use a muffler clamp?
@user-bl3jw4bo3r
@user-bl3jw4bo3r Жыл бұрын
@3:40, who trailers their bike to Sturgis!? 🤣
@parishm
@parishm Жыл бұрын
an overpaid cop with an overpaid taxpayer funded pension !
@TrailBoundco
@TrailBoundco Жыл бұрын
with the second one could I put in the van bolted to the floor and not use tie downs or is it not sturdy enough?
@ntucker5000
@ntucker5000 Жыл бұрын
They both have provisions for that. Be real sturdy when bolted down!
@jeffhyde7934
@jeffhyde7934 Жыл бұрын
I wouldn't use either one without tie downs!
@kumanwaras849
@kumanwaras849 2 жыл бұрын
How many times you said "umm"
@mrsmile9760
@mrsmile9760 2 жыл бұрын
I need this same but with wheels
@jeffhyde7934
@jeffhyde7934 Жыл бұрын
They have a towing unit that has wheels....
@3101home
@3101home 2 жыл бұрын
The 2nd model didn’t appear to have any adjustment on the wheel lock mechanism for smaller light-mid bikes.
@ntucker5000
@ntucker5000 2 жыл бұрын
Correct. It’s clamping design self adjusts. Condor has a pin that allows movement.
@RideAmerica
@RideAmerica 2 жыл бұрын
I have both. The 2nd one has different models for different sizes wheels. You are more limited with the 2nd one if you have a significantly different front tire bike. With that said, the 2nd one is a great chock. Both are nice but I love the 2nd one a little more as the pivot style, such as the condor, can be more tedium getting the bike on and off - especially a heavier bike.
@lkeirnan
@lkeirnan 2 жыл бұрын
There are 4 different models for different wheels from the manafacture
@gbitsbitsg5447
@gbitsbitsg5447 2 жыл бұрын
Badass!!
@Zukilover305
@Zukilover305 3 жыл бұрын
Got it set up wrong!!
@snip_king428
@snip_king428 3 жыл бұрын
Will it work for 26" fat tire bicycles?
@ntucker5000
@ntucker5000 3 жыл бұрын
Hum I guess? But I’m sure there’s smaller more cost effective options.
@Hippy1450
@Hippy1450 3 жыл бұрын
How was the noise level? I'm used to the thunderheader on the 2into1 system. Wonder how noise level compares with 2 slip ons? I want to fit some to my 05 Road King. Currently have v&h slash cut monster slip ons.
@Dazed207
@Dazed207 3 жыл бұрын
So you ran stock tune with no issues?
@ntucker5000
@ntucker5000 3 жыл бұрын
Yup stock tune, and stock air cleaner.
@gbitsbitsg5447
@gbitsbitsg5447 3 жыл бұрын
Great editing and you have a calming voice, keep the videos coming! Hell yeah brother!!!
@nobodysreview6137
@nobodysreview6137 3 жыл бұрын
Heal shifter is the best part.
@kuze32
@kuze32 3 жыл бұрын
what is the part number?
@ntucker5000
@ntucker5000 3 жыл бұрын
BMK Consulting 1045
@akulmonkel469
@akulmonkel469 4 жыл бұрын
Is the same procedure for every bike???
@ntucker5000
@ntucker5000 2 жыл бұрын
Every touring chassis.
@Blayze1017
@Blayze1017 4 жыл бұрын
This will bring the toe shift arm to the outside position, wasting footboard room.
@wb4514
@wb4514 3 жыл бұрын
Not if it's up high enough.
@DirtyDeez
@DirtyDeez 4 жыл бұрын
I notice that at the start of this video the toe shifter sits on the inside of the assembly but after the mod, it sits on the outside. Did you find that you were kicking the bar when you started riding it with the heel shift removed?
@ntucker5000
@ntucker5000 4 жыл бұрын
No, I really didn't notice the difference other than more room with the heel shifter removed.
@cruzcontrol8783
@cruzcontrol8783 4 жыл бұрын
I didn’t know about this heel eliminator, I’ll be looking into it since I’m removing the heel shifter on mine. Thanks.
@alexivack3453
@alexivack3453 5 жыл бұрын
Your sound quality is terrible.
@jameytorregrossa1498
@jameytorregrossa1498 5 жыл бұрын
Music drove me fucking crazy
@shanesigston1640
@shanesigston1640 5 жыл бұрын
That's a primary case not engine case and the heel and toe shifters are the same so you don't need to mark them front or rear
@wb4514
@wb4514 3 жыл бұрын
Also, if you removed the bolts from the front and rear shifter and pushed both levers all the way back, the rattle is eliminated.
@lenjames
@lenjames 5 жыл бұрын
Great vid...next time some classic rock instead I'm a old guy..Hog On
@neumaticayperforacion8551
@neumaticayperforacion8551 5 жыл бұрын
Excellent ride, excellent road!!
@gbitsbitsg5447
@gbitsbitsg5447 5 жыл бұрын
Awesome vid keep it up!
@jl456
@jl456 5 жыл бұрын
How's the slip-ons? Did they turn yellow yet or blue?
@ntucker5000
@ntucker5000 5 жыл бұрын
Hey Chuck, no discoloration. I have the stock tune and cat in the header.
@jl456
@jl456 5 жыл бұрын
@@ntucker5000 okay cool I ordered a set everyone was telling me I needed the heat shields that go over the slip ons to cover the discoloration that will show eventually.
@user-ng1ol2ny7o
@user-ng1ol2ny7o 5 жыл бұрын
I bought some right when I bought my 2018 road glide, and they sound good. I'm now at 250miles and they seem to be getting louder. I can still hear my radio at 80mph
@armandomartinez-jp9zi
@armandomartinez-jp9zi 4 жыл бұрын
I have same slip ons and mine are getting blue ish
@funrutfilms1926
@funrutfilms1926 5 жыл бұрын
My mount busted as soon I tried to tighten screw back on mirror
@ntucker5000
@ntucker5000 5 жыл бұрын
Ah bummer. Maybe too tight?
@shainecongelose8450
@shainecongelose8450 5 жыл бұрын
Helpful video, thanks!
@shaolinf4
@shaolinf4 6 жыл бұрын
Inspect the shaft.
@ntucker5000
@ntucker5000 6 жыл бұрын
That's what she said.
@lguzman130
@lguzman130 6 жыл бұрын
Did this bring the toe shifter out more to the left.
@ntucker5000
@ntucker5000 6 жыл бұрын
lauro guzman slightly, but I don’t notice it now.
@lguzman130
@lguzman130 6 жыл бұрын
I'm thinking about doing it because i wear size 13 and my heel sometimes hits the shifter when I upshift.
@ntucker5000
@ntucker5000 6 жыл бұрын
lauro guzman it’ll give you the room. I’d say go for it!
@lguzman130
@lguzman130 6 жыл бұрын
Thanks, will do
@Nate01693
@Nate01693 6 жыл бұрын
Just ordered mine! Thanks ntucker5000!!!!
@TheRedrocket99
@TheRedrocket99 6 жыл бұрын
Looks good. Any issues with the phone vibrating the mirror loose?
@ntucker5000
@ntucker5000 6 жыл бұрын
Thanks. No, but I used just a dap of Blue Loctite. Still using this same set up with an iPhone 7.
@darrenpunwl
@darrenpunwl 6 жыл бұрын
NICE !!! & CLEAN !!! THanks Bro from Singapore
@PATRIOT821000
@PATRIOT821000 6 жыл бұрын
Can’t hardly hear
@praisethelord4222
@praisethelord4222 6 жыл бұрын
excellent video brother. Thanks for this
@ntucker5000
@ntucker5000 6 жыл бұрын
Glad you enjoyed it! Rubber side down!
@no1but24
@no1but24 7 жыл бұрын
I did this on my 2015 Road glide the turn indicators on the dash were flashing like crazy it was an easy fix with the ignition on the accessory position turn your hazards on until the computer adjusts it
@Jaymil0935
@Jaymil0935 7 жыл бұрын
This might work for Road Glide Specials but not Road Glide Ultra. The actual plug it hooks up to is the one going into the rear fender. If you look on Custom Dynamics website on Fillerz install, it will be the same plug. They need to update their instructions.
@ntucker5000
@ntucker5000 7 жыл бұрын
Yes, the Tour Pack makes the connections different. Good catch.
@bobjohnson2920
@bobjohnson2920 5 жыл бұрын
I just did my 2019 RGU with Probeam taillight and filler lights. To get full space shuttle mode you need 3 separate modules. I only bought the module for the brake and filler lights. I set it on 0, flashes 4 times then solid. If you strobe out the complete tour pack, arm lights, tail lights and filler lights you will probably get rear ended because this will confuse the hell out of people on your intentions. It gets even worse during rush hour traffic, stop and go it will become white noise after hitting your brakes 20 times.
@218422100
@218422100 7 жыл бұрын
do you have to use the smoke lens they provide or can you use a different one?
@ntucker5000
@ntucker5000 7 жыл бұрын
You can use what ever lens you'd like - I just went for the smoked look.
@Romeomonaro
@Romeomonaro 7 жыл бұрын
is load equalizer required?
@ntucker5000
@ntucker5000 6 жыл бұрын
nope, the CANBUS system adjusts automatically.
@Romeomonaro
@Romeomonaro 7 жыл бұрын
is load equalizer required?
@ntucker5000
@ntucker5000 7 жыл бұрын
Alaa Ajaj no, not on the 14-17 model year touring.
@gaknskk
@gaknskk 7 жыл бұрын
I bought this same exact piezo siren for my 16 sgs and it doesn't come with the pins on it ...we're did you get the pins and what size are they? Thanks for any info you can give me on this.
@michaelrizzo7603
@michaelrizzo7603 7 жыл бұрын
Just completed the install. Like ntucker5000 implied, pretty straight forward. I got the part here: www.radioshack.com/products/radioshack-102db-piezo-siren?variant=5717358021. Its catalog number 2730079 and called "RadioShack 102dB Piezo Siren" it cost a whopping $6.99. I wouldn't shy away from it. Really, it's not bad. Black wire to white/green and red to red.
@gaknskk
@gaknskk 7 жыл бұрын
I just got one of these for my 16 sgs and now I need to find out were to get the pins to apply to the wires could you help me out with this ?
@michaelrizzo7603
@michaelrizzo7603 7 жыл бұрын
GM, I got mine at Radio Shack as well. I just wound up buying some cheat transistor, clipped the two leads I needed, soldered them and off to the races I went. Just be sure to used some heat shrink tubing of something similar to prevent the two separate leads from contacting one another.