Hey buddy where can I get a set of those carbon frame guards
@wadenvern2 ай бұрын
i think you had no compression because you adjusted your valves without putting it TDC, which left your valves open, so you would be able to blow air into it. Try lining up the piston tdc then check the clearances. I know this is 4 years old, but someone else might have this problem too, and you should always make sure you're top dead center before touching any of your valves :)
@dylanerekson27203 ай бұрын
y
@sebdul4 ай бұрын
After 3 years the stabilizer is still working? Did you need to rebuild it?
@morganmoto88855 ай бұрын
Where did you get those jets from
@morganmoto88855 ай бұрын
Can I run the stock pilot and the 155 main jet?
@franciscocamacho93445 ай бұрын
My quad is backing firing and popping on idle and when reving. Do you what it can be?
@reggiexp695 ай бұрын
no more videos???
@dqlton52005 ай бұрын
do you guys not ride anymore??
@brokejokeratv58515 ай бұрын
3 days to get mine
@redrider5335 ай бұрын
Just a FYI Never adjust the slider using the cable adjuster. That is used to make sure there is some “free play” in the throttle cable so that when the handlebars are turned side to side that the RPMs don’t increase. Idle is always adjusted on the carb itself.
@rafaelmercado57717 ай бұрын
What brand front bumper on the ltr 🔥
@ronbang8 ай бұрын
Did it come with the cross bar?
@atvdave62688 ай бұрын
Hello. What did you do with the ignition?
@CozoneCozone8 ай бұрын
Link???????
@Floridawoodsbanshee8 ай бұрын
I have 15 front and 41 back? Seems like to much acceleration. Wheelies way too much. Should I try 16 front?
@reggiexp695 ай бұрын
jesus what mods you have? that is crazy i mean to be honest i'm stock 350cc hotrod crack, all new parts, jsuth ave twin air filter in air box all stock + fatboy silencers (stock pipes) and it does wheelie in 1 and 2nd and then does a power wheelie in 3 rd and 4th like for a stock bike with stock gearing 20/11x9 rear tyre and 14/41 gearing.
@Floridawoodsbanshee5 ай бұрын
@reggiexp69 I just started a channel in January. I just did a leak down test on the fresh top end. I will be installing the motor next week. I have a video on the cylinders and ports. It's a 4 mill crank. I will be talking more about pipes and carbs, etc. My bike hits hard. If it gets traction, it easily comes up in 4th gear. I've almost gone over backward because it comes up so fast.
@reggiexp695 ай бұрын
@@Floridawoodsbanshee damn i mean my stock banshee i find it already damn power full i just a got a cheap header pipe fmf but its dented and welded but i just wanted to see how much it will change vs my stock header. cause the stock header is missing top end alot. but has torque. even my friedns they tried it they did a power wheelie in 4th gears came back looked at me and said nahhh im gonna kill my self on this. its like there nothing nothing and ow here is all the power i got. and i will take a look at your channel i love channels with quad stuff. (i upload random stuff about quads also exhaust sounds or when even i do a ride out alone or with friends) i need to film a bit more i always forget.
@Floridawoodsbanshee5 ай бұрын
@reggiexp69 Thank you, and I will talk with you more next time. 👍
@reggiexp695 ай бұрын
@@Floridawoodsbanshee no worry :) for sure :)
@saltygummer57889 ай бұрын
Got confused on this rubber thing, That's why we have kids!! 😂
@mrjamesroe9 ай бұрын
LOL the "I think I might need to go watch Michael Sabo" comment had me
@xxthewolfxx10 ай бұрын
Dam she's smokin hot. I'd totally smash that.
@LuisDiaz-kg1fy10 ай бұрын
Question, do you have to grip on the left hand lever in order for it to start. If not what is the wiring coming out for.
@michaelsalt753810 ай бұрын
S o how do you park it? In 1st gear?
@carlgar200711 ай бұрын
nice chain. love your torke wrench. NOT
@dpmahootie11 ай бұрын
This is quite possibly the WORST DIY video I have EVER watched!! Yall so close I have absolutely no idea where this thing is they are working on
@Kevin_Yagoonie Жыл бұрын
I got the same nerf bars for my raptor 660. Gonna get this same bumper but in blue 👍
@natetheaxebattles2898 Жыл бұрын
Had to stop watching. Kids are obnoxious! Ill watch someone else imstall shocks that has a crotch goblin babysitter.
@kieranbever9818 Жыл бұрын
That's why I have a Yfz 450 and a raptor
@normangettys76 Жыл бұрын
How do you like the Pro Taper grips? I just installed ODI grips on mine
@normangettys76 Жыл бұрын
I just bought a 2018 Raptor 700R SE, great videos. Now to do mods on mine
@normangettys76 Жыл бұрын
I like that bumper
@HisHolinessMadarchode Жыл бұрын
Did any bolts fall out? You didn't use any tread locker
@MultiGuille11 Жыл бұрын
If I ride in a dusty area and I would like to have the air box lid (on) with only a slip-on, is a 140 main jet enough for it?
@paulleadingham Жыл бұрын
I wish I still had my WS6 :( I had a black 02 manual t-top. Anyway, picking up a Yamaha 50 for my grandson this Saturday. Can't wait to see his reaction. Eventually I will circle back around how to make them go faster. He's not quite 5 yet so got some growing into it to do but he is fearless. Loves sitting on my wife's lap and driving our Yamaha Viking side by side.
@agentoneonesix Жыл бұрын
As a Hispanic, I love my fellow Americans 🇺🇸 good comedy 🎭
@chrisrieger9201 Жыл бұрын
Would you have the part# for the riser
@chrisrieger9201 Жыл бұрын
Question- what size are the original bars? Will the riser work with the original bars 7/8
@sergiosalazar9946 Жыл бұрын
would you know how to change an clutch’s grabbing point , would it be the perch?
@viraptor1956 Жыл бұрын
Can you send me a link where I can make the purchase? GRAZIE
@nathanhelms1674 Жыл бұрын
I bought a 05 z400 for $400 and just had a buddy of mine install a 440 bbk and a few other things on it I’ve got roughly $2,100 in it now and can’t wait to take it out
@chrisrieger9201 Жыл бұрын
What year raptor is yours? Is the se or r or standard
@thequadcouple8085 Жыл бұрын
2016, standard. Long sold off this bike though
@chrisrieger9201 Жыл бұрын
@@thequadcouple8085 I’m looking to update my front shocks and thought about the shocks on the r model as a replacement. Thanks
@kamimao9104 Жыл бұрын
I’d like to adopted in the family I am 14 great with kids and love quads with everything I can do my own work on the quad and rebuild a motor suspension I can set it up please adopt me
@geneolivant5575 Жыл бұрын
green coolant and gray gear oil........off to a great start
@jchcameron Жыл бұрын
Just found your channel. I really like your content have an LTR myself. What happen the last video you made was a year ago?
@thequadcouple8085 Жыл бұрын
we’ve been over at our other channel called “Trucking Together” - I have lots of footage to edit just been busy doing the other channel so it’s been on the back burner - will try to turn that around though!
@TheBestCruzthereis Жыл бұрын
Sho what settings have u guys kept it on and how has it held up?
@devinmcgraw4334 Жыл бұрын
I have a artic cat dvx 400 it sounds like its starving for fuel when you get it started you have to bring the idle up to keep it going but it has no power just wondering how to fix it?
@77olzillabarr47 Жыл бұрын
😎
@Striderexe2 жыл бұрын
How are the Chinese handlebar adapters ?
@justinsandvig31812 жыл бұрын
Atta Girl!
@KBMOTORSchannel2 жыл бұрын
Top ends are cheap for those.
@teufelhunden2222 жыл бұрын
Would love to try this. I refuse to run nerf bars though so that prevents me.
@teufelhunden2222 жыл бұрын
Just snapped off my fuel tank bolts. I am very annoyed at those stupid self tapping bolts