I’m sorry, but this is unacceptable. For the price of these aquariums there’s no way in hell you should have to deal with this. This should have been dealt with at the factory.
@andyblackburn669013 күн бұрын
Any tips for installing the rebound kit? I can’t seem to figure out the installation of them.
@allennewland974924 күн бұрын
Excellent video!! I'm going to do the exact same thing on my WB 150.4 just to remove the "tricking" from the OF teeth. I also just noticed something else, the e-drain is a bit too close to these OF teeth letting some water "spray" up into the top of the e-drain. Your HACK will solve both problems and allow a trickle of the e-drain to not drop so far (due to the 45's) and decrease those sounds too. Well done :)
@Saltyrootsjax24 күн бұрын
Thank you and good luck!
@philbert386624 күн бұрын
Is it still skimming surface good?
@Saltyrootsjax24 күн бұрын
So far so good. No oil slick look at the surface.
@nenocoelho4783Ай бұрын
Where do you live in Florida?
@SaltyrootsjaxАй бұрын
Saint Augustine
@cesarsreef5156Ай бұрын
Where did you find the extenders?? If you don't mind sharing the source
@SaltyrootsjaxАй бұрын
These are the pieces I used: a.co/d/iITq322
@stoneysscapes7544Ай бұрын
I know of a few things that you can get for getting out all of the water and it's just a good tool to have for whatever it may be ? what it is GOOGLE MILWAUKEE AIR-TIP 1 - 1/4 in. 2 - 1/2 in. Wet/ Dry Shop Vac Long Reach set ...... You could also get a dryer vent attachment for less than $10 and then always have a lint free happy Dryer. What alot of people will do is make it using PVC parts , and then different hoses etc. using a heat gun to shrink or expand in order to get it to work. GOOGLE Images to see what some examples of people who might have been breathing in some heat gun fumes lol😮
@yourfavoritegarconАй бұрын
awesome video! Thanks for sharing and look forward to part 3, 4. Question: Lifting the tank on to the stand, was you and your wife/2 people enough? Was ensuring the tank was level once on the stand challenging? Thanks!!
@SaltyrootsjaxАй бұрын
I had two neighbors help lift the stand, and we definitely needed all three of us. The stand has leveling feet so I spent a fair amount of time getting that perfectly level before the tank was on. Once the tank was on it was also level.
@queencityreefsАй бұрын
👏👏👏👏👌✌️
@MikeLemmingАй бұрын
What did you pick up?
@SaltyrootsjaxАй бұрын
Two stuffed octopuses and two balloon animals lol. We happened to be in Orlando for another event that day. By the time we left that it was late and we needed to get back home so we just stopped very briefly so I could see it and film some of it so and our daughters were the only ones that got something!
@MikeLemmingАй бұрын
@@Saltyrootsjax kids come first, I get it. But with money in my pocket and to be at RAP, i don’t think I could have left empty handed lol
@CJSAQUARIUMSАй бұрын
May still wanna let water trickle down that emergency drain.. otherwise you will get surface scrim buildup on the overflow.. a trickle shouldn’t make too much noise. Nice work stuff like this are lessons worth sharing for people starting their build off 🫡🤝🏾
@martinkester3501Ай бұрын
Those are 40mm 45’s right?
@SaltyrootsjaxАй бұрын
Correct. These - a.co/d/9SNIs7m
@martinkester3501Ай бұрын
What return pump are you using? I have same tank but peninsula the 6025 and I have been trying to quiet things down and have 3 areas creating noise 1 the return overflow weirs which after watching your video I ordered the fittings, so that will resolve that #2 the weirs in sump going from refugium to protein skimmer chamber, they water fall slightly at 600gph making a trickle noise, and 3 return pump sicce sdc 9 makes a pretty noticeable hum? Wondering if you have sump noise and what return pump are you using and how loud is it?
@SaltyrootsjaxАй бұрын
@@martinkester3501 I run the Maxspect Jump series on this tank. It’s turned way down but it’s virtually silent. Here is a link to them: www.maxspect.com/en/jump-series/602-mj-dc-pump.html I also use these pads under pumps, skimmers, etc and they definitely help with the humming noise: a.co/d/38C7Fsz
@philbert386624 күн бұрын
Is it still skimming surface ok?
@MikeLemmingАй бұрын
I wish my tank was silent like this! I plumbed it myself and with a slightly older mp40’s, there’s quite a bit of noise..
@farhodkalonov9370Ай бұрын
Why would you need to drill? Why not just submerge the tube?
@SaltyrootsjaxАй бұрын
You could make that work! You would just need to find a way to keep the tubing at the bottom as if it floated up, the siphon would break and no water would flow. Drilling this way and using a push connect fitting for the tube is just more reliable in my opinion.
@henryhernandez8108Ай бұрын
They also test the tanks more than a month before shipping. And cleanup to looking new and ships.
@nhathuynh1574Ай бұрын
What kind of main pump you using
@SaltyrootsjaxАй бұрын
Neptune COR15 on this
@zachwybrow638Ай бұрын
You would have gotten a far more natural look simply stacking the reef rock the rods and configuration make it look very artificial but the setup is nice man
@kevinw7044Ай бұрын
When the coral grows out it will probably look far more natural than a pile of stacked rocks.
@queencityreefsАй бұрын
Thanks for sharing 🙌💯🔥👏
@fishstix1988Ай бұрын
At 1:06, how are you able to keep the trident lower than the sump? I thought you're suppose to keep it higher so it doesn't create a siphon
@SaltyrootsjaxАй бұрын
Ideally, you are right, that would be best practice. However, as long as it is running continuously and the tubing does not come disconnected, it should be okay. I’m working with very limited space so I don’t have much of a choice. But again, if you have the option, best practice would be to have it higher up.
@TeshandorАй бұрын
informative video, good work. thanks!
@boosterman70232 ай бұрын
I love following your build! 8:30 How many 5 gallon jugs did you have to carry? That looks like a decent workout lol
@SaltyrootsjaxАй бұрын
Thank you, I really appreciate that! By the end it was 18 of those jugs. One of these days I will either do auto water changes or something a little more efficient.
@MikeLemming2 ай бұрын
It happens bro. Better not than later. The tank is coming along! Looking forward to seeing what you can do with this tank!!
@ylsReeftankinChina2 ай бұрын
sooner or later, ur cat might accidently fell in ur tank😵, need to put something block it from jumping around
@ylsReeftankinChina2 ай бұрын
need part 3
@Saltyrootsjax2 ай бұрын
Working on it now!
@ylsReeftankinChina2 ай бұрын
salifert po4 test is not that accurate, might still need hanna to test po4.. my salifert po4 test points my tank po4's at zero, but hanna test shows 0.1😵💫
@Saltyrootsjax2 ай бұрын
Yikes! I believe my issue is probably algae. I have quite a bit of bubble algae that I’m sure is holding most of the po4 making the test read zero. Once I get that cleared up, I’ll try a new test kit brand. Thanks for the advice!
@superneedypets2 ай бұрын
I had my Trident all boxed up and ready to send in for a service/repair due to this issue. I found flushing the water intake from the main manifold resolved the issue! All connected and working fine! Thanks for the video!
@Saltyrootsjax2 ай бұрын
So happy I could help and hopefully save you a few bucks!
@superneedypets2 ай бұрын
@@Saltyrootsjax yep, definitely. Like I said; I’d performed the shutdown procedure and packed it in its box ready to go in for the repair. I was even considering buying a replacement during the downtime! 👌🏿👌🏿👌🏿👌🏿👌🏿👌🏿👌🏿
@Dillio19882 ай бұрын
Just got my Infinia Reef 150.4 on Friday and they sent the wrong stand 🥲 Waiting until Monday to talk to them has been torture
@Saltyrootsjax2 ай бұрын
My stand had a scratch on one of the door panels. They sent me a new one with practically no questions asked. Their customer service is top notch!
@76honda762 ай бұрын
Very nice tank bro. I have the 4’ frag from WB as well.. clean and modern tank ! Btw looking at the spot your tank is in, you might think about leaving at least 6” gap in the back to run wires and or access / pickup things that may fall back there. I have mine roughly 6” and I got a UV hidden back there. Also, I dumped their Ato reservoir as it’s not big enough and the evaporation is bad. So I got the Innovative Marine 15gal reservoir that sits on the side that lasts a week. Congrats on the upgrade bro cheers !
@Saltyrootsjax2 ай бұрын
Thank you! Good call and I definitely did leave a fair amount of space on the back and that has helped with wires and equipment for sure. I did use the WB ATO and have noticed the evaporation rate but the bigger problem for me is size of the tank. As you can see, I have no space to the left or right of the display so no room for equipment outside of the cabinet. I may switch to a smaller/more compact ATO tank to free up more space in the cabinet.
@76honda762 ай бұрын
Redsea I coming out with a 5/10gal reservoirs. They are super slim and it’s called Reefcan which you can preorder now. I think $100 for the 10gal.. imo isn’t bad for the dimension. They have slim water storage containers for off road / rv that way more than 100 bux.
@MikeLemming2 ай бұрын
Off to a good start bro. Very nice set up so far! What’s the plan for the tank? And you have a real nice house bro. Doin big things!
@Saltyrootsjax2 ай бұрын
Thanks, Mike! Likely mixed reef but mostly SPS.
@MikeLemming2 ай бұрын
@@Saltyrootsjax ya that’s the plan for most of us. It should be a nice tank! Looking forward to watching the progression!
@boosterman70232 ай бұрын
That's an amazing location for the aquarium! You have direct access and view of the top from the opening behind.
@Alexkv111112 ай бұрын
Nice man 👌
@queencityreefs2 ай бұрын
Congratulations bud! Definitely best feeling in the world 🙌🔥💯✌️
@Daniel_SWE2 ай бұрын
Congratulations to the new tank! Perfect timing as I'm thinking of order a 190.5 myself. Looking forward to the next video.
@koltonramsey2 ай бұрын
😃
@mckenzie3902 ай бұрын
It’s great feeling,mine was delivered first week of January. Looking forward to the build 👍🏽
@jacklawer63893 ай бұрын
Nice video thanks Can you use dr tims with fish and corals ? Thanks
@Saltyrootsjax3 ай бұрын
Yep! Just make sure you follow the instructions closely.
@jacklawer63893 ай бұрын
@@Saltyrootsjax thanks
@MikeLemming3 ай бұрын
I’m dealing with the same thing brother. 23 nitrates and 0 phosphates. I started feeding a more and added reef roids to my food. I read it’s heavy on phosphates. Today is day 1 so I’ll give it a few days and test. Fingers crossed!
@Saltyrootsjax3 ай бұрын
Let me know how it goes!
@MikeLemming3 ай бұрын
After day 2 of feeding in the morning and once again at night with frozen and reef roids. Tested .006 with the Hanna checker. It’s not much but it’s a reading. Been getting 0 for a couple weeks now. It’s moving in the right direction!
@EllenKlocko3 ай бұрын
Promo_SM 🍀
@evancharboneau43444 ай бұрын
Very helpful. Thank you
@pruthvimgowda4 ай бұрын
It's easy to do these when your all alone ,but when ur with your family all this doesn't make sense to anyone.
@Jesus066454 ай бұрын
Can you please drop the link? I have the same tank. And would like to swap out the return nozzle as well. Thanks in advance!
@Saltyrootsjax4 ай бұрын
@Jesus06645 These are the parts I ordered. 1/2" for both. 1 Y fitting and two nozzles. www.bulkreefsupply.com/loc-line-y-fitting.html?queryID=a9ef81097f5252aa4b2c9914af585946&objectID=1709&indexName=brs_prod_m2_default_products www.bulkreefsupply.com/loc-line-flare-nozzle.html?queryID=935dbf58cac465369168a3a6c426649b&objectID=1699&indexName=brs_prod_m2_default_products
@Grantdaryn4 ай бұрын
I'm starting a Fowler! Been out for a while getting back into it subscrbed
@Saltyrootsjax4 ай бұрын
Thank you for the support! FOWLR tanks are great. So many fish options that you otherwise couldn’t keep in a reef tank!
@Grantdaryn4 ай бұрын
@@Saltyrootsjax Exactly!
@Grantdaryn4 ай бұрын
3 screws in 2x6s
@kalamazoo_reefer5 ай бұрын
I think you’re the first person I’ve seen who actually uses that tiny little reservoir that sits on top. It would be convenient to fill, I guess, but I’d look into a 10 gallon tank and hide it in a side cabinet or something. Too lazy to fill up the reservoir every couple days! 😂
@Saltyrootsjax5 ай бұрын
😂 definitely not ideal! Will be upgrading that to something better soon.
@MikeLemming5 ай бұрын
Enjoy your vacation bro. Happy holidays!
@Saltyrootsjax5 ай бұрын
Thanks, Mike. It has been some full days. I was blown away with the Disney aquarium area by Nemo. Their reef tanks were so well maintained and mature. Got some nice shots and will post a video when we get back.
@MikeLemming5 ай бұрын
@@Saltyrootsjax looking forward to it!
@xisotopex5 ай бұрын
does the chemi clean kill coralline algae?
@Saltyrootsjax5 ай бұрын
No, not in my experience at least.
@xisotopex5 ай бұрын
hmmm... thinking about it.... never had a sump, but other than the sump over flowing, a sump seems like superior filtration over everything else.... I imagine these are made locally in Jax?
@Saltyrootsjax5 ай бұрын
Yes, I would definitely recommend running a sump when possible! There are various ways you can ensure it won’t overflow such as sizing the sump appropriately, making sure your return output nozzles are just below to surface of the water to minimize the amount of water siphoned when the power goes out, drilling a small siphon break hole in your return output, etc. Yes, the Pro Stars are made locally in Jacksonville!
@MikeLemming5 ай бұрын
Off to a good start. Enjoy Florida bro!
@Saltyrootsjax5 ай бұрын
Thanks, Mike!
@moereefer6 ай бұрын
i’ve moved my tank twice but that was 150 gallons i don’t think i can do again with that size. my TDS is 540-570. coming in.
@Saltyrootsjax6 ай бұрын
I had a 300 and 125 in Indianapolis but there was no way I was going to attempt moving those. 540 to 570?!?! Wow! Where do you live?
@Lee-he2qp5 ай бұрын
10 is better than bottled water, mine is 300+, you have high standards lol, tank looks great at the end, could have sworn I saw two Banggai cardinalfish when you were filling the tank?
@Saltyrootsjax5 ай бұрын
@@Lee-he2qp I didn’t realize how high TDS can be for others! I agree, I should be very happy. Didn’t have Banggai Cardinals right away but I actually do have two of them in there now.
@Lee-he2qp5 ай бұрын
@@Saltyrootsjax your sediment filter depends how long it had been running did look ready for a change, but that catches solids, shouldn’t really affect your TDS dissolved solids, probably why you were thinking 10 was high from looking at your sediment filter…might be worth moving to a 1 micron sediment filter if you’re using 5, they are near enough the same price where I am.
@Saltyrootsjax5 ай бұрын
@@Lee-he2qp thanks for the tip!
@rabidhamster88847 ай бұрын
Nice basic stand. Would look better for a clutter free look if doors were added to the front tho. Can you do a video on that?