Жыл бұрын
Жыл бұрын
Жыл бұрын
Жыл бұрын
Жыл бұрын
Жыл бұрын
Жыл бұрын
Жыл бұрын
Жыл бұрын
Жыл бұрын
Жыл бұрын
Жыл бұрын
Жыл бұрын
Жыл бұрын
Жыл бұрын
Жыл бұрын
Жыл бұрын
2 жыл бұрын
6 жыл бұрын
7 жыл бұрын
7 жыл бұрын
7 жыл бұрын
7 жыл бұрын
8 жыл бұрын
8 жыл бұрын
8 жыл бұрын
Пікірлер
@tylerponds7 Күн бұрын
Where you get that throttle setup?
@billypetree5489 7 күн бұрын
Your good American sir. TY MEGA
@clintmidkiff5405 3 ай бұрын
Thanks for the paper plate trick!
@mtnguyen1696 4 ай бұрын
I have front bait and tear live wells that are not working. I’d guess both need to be done the same way. Would it work if I just do it to the discharge line only?
@waynedillman8137 4 ай бұрын
Poor features on all mako boats! I have the 18 lts with the same problem but my live well will not drain and just overflows into the boat mako has known of these problems for years but will not fix them. I will never buy another mako boat again!!
@fishlanier 5 ай бұрын
Cut the Fen music
@user-ce8hw2on5t 7 ай бұрын
Me and a buddy tried the crappie in 30 ft of water yesterday around 2946 bridge area. No success at all. We don't have livescope. Any suggestions of an area we need to be fishing for crappie?
@armadillooutdooradventures9792 7 ай бұрын
Try the 515 E Fish off the east side of the bridge about 20 ft
@user-ce8hw2on5t 7 ай бұрын
@@armadillooutdooradventures9792 thanks for the info armadillo
@user-ce8hw2on5t 7 ай бұрын
Thanks for the info armadillo. Will try it this weekend.
@crestonsimmons9862 8 ай бұрын
im a veteran and first responder both fire and ems thanks for your videos there were a lot of help
@armadillooutdooradventures9792 7 ай бұрын
I'm glad to hear it was helpful. Thank you for watching
@debrascaife7793 8 ай бұрын
Great job!
@armadillooutdooradventures9792 8 ай бұрын
Thanks for watching I will be putting out more content soon.
@budcat2 10 ай бұрын
great idea... good information. hard to hear you with the background music.
@armadillooutdooradventures9792 10 ай бұрын
Yea that was a while ago, I've learned a lot about editing since. Thank you for watching.
@alananderson2961 10 ай бұрын
Music is to much. Hard of hearing and not enough volume.
@armadillooutdooradventures9792 10 ай бұрын
Yea I've learned alot since this video. Much better quality now. Thank you for watching
@flslingmaker8612 11 ай бұрын
I have the same problem with both my live wells on my Carolina Skiff. Basically the same setup and I know its a air lock that's causing my issue. Tried rerouting the hoses so that there were no dips or low spots, but that still didn't help much. Now I'm going to try this vent setup as you did and see if that works. Mine goes to a "T" that splits off to the back and forward live bait wells, and if I break the connections at the "T" (pull the hose off) that pump works just fine. I can see the water in the hose that's causing the air lock so the vent should work just like pulling the hose off the "T". Thanks for the idea, it looks like a simple enough fix.
@armadillooutdooradventures9792 10 ай бұрын
Hope it works out. Thanks for watching
@dereksmith2929 Жыл бұрын
What did you do with the crankcase tube that ran the OEM pump? Did you just leave it venting to atmosphere? I’ve got a built 670 with a 34mm Mikuni flatslide. I’m running an electric fuel pump along with the OEM pulse pump. I’d like to just run directly from the electric pump to the carb, but I’m not sure what to do with the crankcase tube. Any advice?
@armadillooutdooradventures9792 11 ай бұрын
I want to say I left it open its been a little while
@scotttomkins9439 Жыл бұрын
this is a common problem with these engines, the stumble. Back both jets in carb out 1 turn
@armadillooutdooradventures9792 Жыл бұрын
Thanks for watching. I was showing the process I used, there are alot of variables in tuning a carb. The number of turnes could be different depending on altitude barimetric pressure dewpoint in the air etc. I think you just tune until you are happy with the performance. thanks again for watching
@williecolon9678 Жыл бұрын
Music sucks
@WARD5KUSTOMZ Жыл бұрын
I dont know what he had for exhaust. I heard one of these going through the lake sounding like a harley
@armadillooutdooradventures9792 Жыл бұрын
Yes its a Vtwin with an open exhaust itsgot a beefy sound
@loganrexroat3063 Жыл бұрын
What app is that you were using for the mph?
@armadillooutdooradventures9792 Жыл бұрын
It was just an app I found on Play store I don't remember the name and its in an old phone. I know it was a free app wish I had more info for you
@truegrittt1857 Жыл бұрын
Is there a link for the fuel pump you got from o riellys
@armadillooutdooradventures9792 Жыл бұрын
I dont have a link to the pump but it was a basic low pressure pump. I just didnt want to go with the same one I puled off.
@crawdaddycustoms1655 Жыл бұрын
Thank you sir! How do you like the pro skiff? I’ve been on the fence about getting one.
@armadillooutdooradventures9792 Жыл бұрын
It has pros and cons just like any other boat. I will say it is very stable in rough water
@wisconsinbush2940 Жыл бұрын
What is the advantage of doing this?
@armadillooutdooradventures9792 Жыл бұрын
The factory exhaust is pretty restrictive and we were getting ready to put other mods into the motor
@wisconsinbush2940 Жыл бұрын
Did you build that surface drive?
@armadillooutdooradventures9792 Жыл бұрын
No it was a mud nuddy
@walteroquinn757 Жыл бұрын
To much noise to start so I didn't look I got my one music
@albertcanon1714 Жыл бұрын
Interesting
@armadillooutdooradventures9792 Жыл бұрын
Seems to work pretty good for me. If you try it let me know how it works
@kylexxneedham Жыл бұрын
How did you make the mud buddy work with the predator? Picking up a mud buddy frame and can’t find any info on it
@armadillooutdooradventures9792 Жыл бұрын
It was together when I get the motor
@CC-pi6gm Жыл бұрын
I’m so glad to come across your video! I’m in the process of putting a predator on a mud buddy frame. Did you use a 1” to 1 1/8” adapter sleeve?? Did you have to make any other adjustments or modifications to make it work?
@armadillooutdooradventures9792 Жыл бұрын
I think it has the 1 1/8 shaft
@CC-pi6gm Жыл бұрын
@@armadillooutdooradventures9792 They are 1” unfortunately, and the belt pulley/clutch is 1 1/8”. I’ve read about some people shearing adapter sleeves but yours seems to run well. I’m not sure what I’m going to do.
@armadillooutdooradventures9792 Жыл бұрын
@@CC-pi6gm I ran it trough all sorts of crap wfo it never gave me any trouble. I sold the motor recently and got an outboard. Will probably be getting a jet foot motor soon. That motor served me well but my needs have changed.
@wesleysexton7766 Жыл бұрын
I’m going to buy one of them predator 670cc V twins I was looking at one at Harbour freight and on it it said do not run vertically. Why do they say that
@armadillooutdooradventures9792 Жыл бұрын
Its in horizontal position here if you turn it up on its side fluids will run out
@camodupoutdoors1653 Жыл бұрын
Duck Commander song
@armadillooutdooradventures9792 Жыл бұрын
Didnt realize it I just pulled it straight out of the KZfaq audio library
@albertbradeis5144 Жыл бұрын
It worked 😊
@armadillooutdooradventures9792 Жыл бұрын
Thanks for watching
@nathanurick8320 Жыл бұрын
Please don’t play back ground music because we can’t hear you
@armadillooutdooradventures9792 Жыл бұрын
Sorry for that. It was one of my first videos and I was new to editing. If you see some of my newer ones You will see I have gotten a considerable amount better, Although still could always use improvement. Thank You for watching
@haileyknight Жыл бұрын
They gone say u making liqour
@armadillooutdooradventures9792 Жыл бұрын
Thats the barrels we hide. Just kidding it would be more like beer.
@williamschmitz3362 Жыл бұрын
Great info. I've been doing old mallard and pintail hens. I believe if you have detailed hens it can't hurt.
@armadillooutdooradventures9792 Жыл бұрын
I believe the more detail the better. Thank you for watching.
@texasdboxoutdoors746 Жыл бұрын
Did you film this before or after the freeze?
@armadillooutdooradventures9792 Жыл бұрын
Right before the freeze
@blakesicking2308 Жыл бұрын
Interesting, dbl jig rig but with a weight on bottom. Not sure I've seen that before.
@armadillooutdooradventures9792 Жыл бұрын
Had some oldtimers suggest it. Similar to a drop shot. Been working pretty good
@blakesicking2308 Жыл бұрын
@@armadillooutdooradventures9792 Nice I give it a shot I figured that drop shot weight would spook them but I do like that nice big clear target on livescope
@greybeardfishing35 Жыл бұрын
Side note: to remove a hook that is swallowed deep, needlenose pliers through the gill plate and twist will get that hook out 99% of the time 😉 Tightlines brother! 🤘😎
@armadillooutdooradventures9792 Жыл бұрын
I think I will get some forceps, but the through the gill is a good idea
@greybeardfishing35 Жыл бұрын
Make sure the info is correct, there are only a few Texas lakes that enforce the rule of retaining ALL crappie caught and not ALL. Also, to help in the future and save a heartache, lose the Crappie sleeve. Local game wardens use a Check-It-Stik to measure length as the sleeves on alot of occasions are off as much as a 1/4 inch. And depending on their mood that day, whether you get a ticket or not. Ask me how I know from a few years back 🤣 Luckily I got a warning, with a 9 3/4" fish that measured 10" with the sleeve. Good video and tightlines! 🤘😎
@armadillooutdooradventures9792 Жыл бұрын
I spoke directly to Kurt Kelly who is my warden about this. I usually wont keep one that measures less than 11. Thank you for watching and I suggest anyone get to know their warden and ask questions regularly.
@446hemi Жыл бұрын
they will kill ducks for sure
@justinander_glock Жыл бұрын
Do you have a part number for the fuel pump
@armadillooutdooradventures9792 Жыл бұрын
I don't have the part number but it was the only low pressure precision pump Oreilly had. It was either that one or the Edlbrock I would suggest planning on replacing either one at least once a year especially if you run it much at all. Thanks for watching.
@justinander_glock Жыл бұрын
What size boat and what kinda speeds are you seeing
@armadillooutdooradventures9792 Жыл бұрын
It's a 1648 i'm getting 23 to 24 empty
@justinander_glock Жыл бұрын
Sweet I got mine on a 1444 monark 670 with an old Dixie surface drive frame still trying to find that sweet spot in my trim but hopefully I start seeing some speed soon I’ve only hit 16 so far I know it’s got more than that
@buckywharton3594 Жыл бұрын
This is what I done to mine. Replaced the carb with a true mikuni slide carb 38mm. Installed an electric pump just as you did, only I installed an adjustable fuel regulator so it doesn't flood the carb with excess pressure. I also used a relay to power pump instead of powering pump directly through key switch. This will help key switch last allot longer plus prevent smoking wires (fire hazard). This is how big industrial motors are ran. Use small power to control big power. In the case of boats it is dc power which is harder to switch than ac power. Enjoyed your video. Always something to learn. Thanks.
@armadillooutdooradventures9792 Жыл бұрын
Thanks for watching, The relay is a great idea I believe I'll try it. I have a 38 Mikuni will be installing soon. Going to try to put out the exhaust video this weekend. Keep your eyes open for it.
@camerongliganic7333 Жыл бұрын
What fuel pump and fuel regulator did you use?
@armadillooutdooradventures9792 Жыл бұрын
@@camerongliganic7333 the pump is a Precision low pressure from Oreilly no regulator.
@buckywharton3594 Жыл бұрын
As to the pump and regulator, I used an old Holley canister or in line pump I had from an old hot rod I had years ago. Not a racing one, just one that would feed a quadrajet. I had an old napa brand reg from back in the day with a pressure port for a pressure gauge. It is regulated to around 2 psi. Your set up may have different requirements depending on carb, cam, heads, etc. My engine is NOT stock by any means. It operates from 5 to 6000 rpm but it's still only two cylinders and too much pressure overcomes the float seat and will flood the carb. I'm sure you can find these two items at any AutoZone, advance, O'Reilly's, etc. You will probably have to experiment with your engines pressure requirements at idle and WOT to see how much it needs to keep engine from starving from fuel. Here's a freebie. Mount the fuel pump as close to your fuel tank as possible, as some pumps don't like to much suction head. Obviously take all precautions to make it intrinsically safe. (No sparks.) I would give you guys some part numbers but they're are all wore off. 🤷 Good luck and most of all have some fun.
@McFarlenCrew2014 Жыл бұрын
Can you list everything you did from bone stock?
@armadillooutdooradventures9792 Жыл бұрын
At the point here all I have done is adjust the carb. Since then I have installed a new fuel pump,that video will be out soon. I have gutted the exhaust and opened it up. I built a pretty cool grab bar and I have a mikuni carb to put on. I have a few videos made just not edited yet and will be making more as I progress. Thanks for checking it out.
@garrywaterman7570 Жыл бұрын
Do you have a link for that book
@armadillooutdooradventures9792 Жыл бұрын
I got the book from a taxidermy supply company vandykes or wasco should have it
@garrywaterman7570 Жыл бұрын
First time seeing you I’m going to join please your music is too loud don’t be playing music when you’re talking. I love your details about how to tell us to do things thank you
@armadillooutdooradventures9792 Жыл бұрын
Thank you for watching and following. Those are early videos I was still very new to editing. It has gotten better I'm still learning tho.
@garrywaterman7570 Жыл бұрын
@@armadillooutdooradventures9792 I have several decoys that I bought that I am wanting to paint now canvas thank you
@armadillooutdooradventures9792 Жыл бұрын
@@garrywaterman7570 Sure hope I have made it easier for you. I've had hundreds of decoys given to me over the years and I had to figure out what to do with them so I just made them fit my needs
@georgebonafino7161 Жыл бұрын
Music is WAYYY to loud AND you don't need it. Good info. Thanks!
@armadillooutdooradventures9792 Жыл бұрын
Thanks for watching
@andreiromero6044 Жыл бұрын
Exelente ❤️🔥😇✌️
@armadillooutdooradventures9792 Жыл бұрын
Thanks for watching
@BrokeBackBob4559 Жыл бұрын
Great video for helping others out
@armadillooutdooradventures9792 Жыл бұрын
Glad to help
@EastTexasAnglerJordan Жыл бұрын
Nice to see people catfishing fork!
@armadillooutdooradventures9792 Жыл бұрын
It's my back yard and bass don't do much for me.Thank you for watching.
@EastTexasAnglerJordan Жыл бұрын
@@armadillooutdooradventures9792 I'm right down the road I catfished it in my kayak before the dam repair, I've been fishing Tawakoni dam lately 👍
@armadillooutdooradventures9792 Жыл бұрын
@@EastTexasAnglerJordan I havn't done quite as good on Tawakoni as I normally do. Keep watching and if you see me out be sure to holler
@mikeoxlong9823 2 жыл бұрын
Great video!
@armadillooutdooradventures9792 2 жыл бұрын
Thank you for watching Mike. Are you familiar with lake fork?
@armadillooutdooradventures9792 2 жыл бұрын
Mallard hen is in the works. I'll be posting content again soon.
@shawngriffiths9480 2 жыл бұрын
Hello my name is Shawn and I would like to see a hen mallard repaint.
@armadillooutdooradventures9792 Жыл бұрын
I'll be making more decoy videos soon. thank you for watching
@screamingeaglesoundinc7604 2 жыл бұрын
I'm making my own decoys and learned to paint em from you . I like your video. I love the detail you put into it
@armadillooutdooradventures9792 Жыл бұрын
Awesome! Thank you!