4 ай бұрын
6 ай бұрын
7 ай бұрын
Пікірлер
@soybeledward3 16 сағат бұрын
Dang wish i had a car so i can put some wax on
@soybeledward3 16 сағат бұрын
I bet it was hard to remove after because u got way overkill amount of wax but it still looks great
@soybeledward3 16 сағат бұрын
You put way too much on it but it looks great
@soybeledward3 16 сағат бұрын
Man that car looks great
@soybeledward3 16 сағат бұрын
Im sure that wax holds on even in super hot temp because its got chemicals that stabilize it
@soybeledward3 16 сағат бұрын
It looks fabulous, and black car is very hard to do because you see every imperfections on a black car
@soybeledward3 16 сағат бұрын
I bet in direct sun that black car is smoking hot does the wax stay on or does it melt off, i think they mix in some clay powder into the wax thats why it looks so good on the car because when you buff it off with the towel it dries out all the oils and its like you did a clay bar cleaning on your car its so good the results speak for themselves it looks fabulous
@soybeledward3 16 сағат бұрын
Carnuba wax is so great its so smooth and glossy like candy shells, truck looks great
@billbuss7542 17 сағат бұрын
I bought a Milwaukee 21mm cordless polisher not knowing that I would have been better off buying the 15 as I am fairly new to polishing.. Would you recommend selling the 21 and take the loss, or can I get better results replacing the 6 inch with a 5 inch backing plate?
@alisterweaver6279 23 сағат бұрын
Do a vid on replacing rear fog in bumper
@NicholasMata-qn7ks Күн бұрын
Do you know the engine model number? Or what type of engine it is
@brunnierivera6796 Күн бұрын
This can be used on rearview mirrors if they have anti glare? Thanks
@peterbowman5750 Күн бұрын
Hopefully eating Griots pods wont be ome popular like tide pods
@FABAutomotiveDetailing 21 сағат бұрын
🤣 I would suggest not doing it anyways!
@Ricky_R 2 күн бұрын
I just watched the official Griot's video on these pods. You didn't do anything wrong.
@FABAutomotiveDetailing 2 күн бұрын
That’s good to know! Thanks for watching
@sushinktattoo1366 2 күн бұрын
I find this product to be good after leveling it with another ceramic spray. It just adds extra shine is all.
@FreeYourBrains 2 күн бұрын
I’m trying to find the products and nothing. Any links?
@FABAutomotiveDetailing Күн бұрын
www.walmart.com/ip/Platinum-Series-Buffer-Polisher-6-Speed-Dual-Action-for-Car-Detailing-6-inch-5-Piece-Set/5018588282?athbdg=L1600&from=/search
@FABAutomotiveDetailing Күн бұрын
Here is the link! It all depends on where you live and the zip code you put in.
@Mowthe 2 күн бұрын
Awesome review video! This just might be what I'm looking for. Im a DIY'er and Im currently using a palm sander 😅 for correction and polish. I cant justify hundreds of dollars for something that will only get used a few times a year. Solid video, sir! You earned a subscriber today! Cheers!
@FABAutomotiveDetailing 2 күн бұрын
Thank you and welcome to the FAB Family
@Mowthe 2 күн бұрын
This review really must have made an impact, I cant find this DA in any store, and it's out of stock online! Any other budget friendly Diy-er DAs you reccomend?
@Marine2111usmc 2 күн бұрын
Im afraid of burning the paint.
@FABAutomotiveDetailing 2 күн бұрын
It can be done but if you keep your hands moving and use common sense then you will be fine. You would have to sit in one spot for a very long time to burn through.
@MNpicker 2 күн бұрын
Definitely does the job.. pretty well actually!!. I Like products like this👍🏻
@FABAutomotiveDetailing 2 күн бұрын
It’s always been a great car wash soap
@bhall7025 2 күн бұрын
I get better results with runny foam. I agree with you completely.
@FABAutomotiveDetailing 2 күн бұрын
Thanks man
@jaykid007 2 күн бұрын
Pods are convenient however usually more expensive and I’ll stick to the good ole jug of their soap. Appreciate the demo Brian
@FABAutomotiveDetailing 2 күн бұрын
You are welcome!
@nelsonrivera4976 2 күн бұрын
El mismo cabeza de Ñame 😅😅😅 Ridículooooo 😅
@darrallmeharg6912 3 күн бұрын
Great video. Mrs. is on to something. Warm water may be the answer
@FABAutomotiveDetailing 2 күн бұрын
Thanks and I agree!
@pkk6428 3 күн бұрын
About 27 years ago there were pods at Walmart. Not sure of the brand
@FABAutomotiveDetailing 2 күн бұрын
That’s interesting
@pkk6428 2 күн бұрын
Funny how things repeat
@gabrielmacias4466 3 күн бұрын
How muck is the yearly subscription?
@yesla4tesla 3 күн бұрын
I am actually surprised it has taken this long for someone to do these lol.
@FABAutomotiveDetailing 3 күн бұрын
I’ve had them for a while just haven’t had time to use them until now.
@user-kk2mz4wk3l 3 күн бұрын
Some dealerships used car dealerships are putting them in vehicles so if they have to repo they know right where to go get them
@FABAutomotiveDetailing 3 күн бұрын
Yes they do but I had only owned it for 2 weeks and that corrosion wouldn’t happen that quickly. It was on there from the first owner.
@fiouable 3 күн бұрын
I don’t have the patience to wait for it to dissolve. And yes I passed 3rd grade, so I can use a measuring cup. Another gimmick to sell stuff.
@FABAutomotiveDetailing 3 күн бұрын
Nothing wrong with that!
@deactb59 3 күн бұрын
You know, that’s the reason why I like your channel so much I agree with you. You don’t have to have shaving cream type of foam and that’s what the so-called haters will always say the phone you’re producing with the Griots Garage Is exactly the phone I always produce thank you for always keeping it real and would great videos you do
@FABAutomotiveDetailing 3 күн бұрын
Always! I’m not one to go with what the crowd is doing.
@stevehoppenjan 3 күн бұрын
As a big fan of Griot's Garage, I am surprised they have a huge "miss" on this one. No thanks. And correct me if I am wrong, but I believe the cost penalty for convenience is quite steep too.
@FABAutomotiveDetailing 3 күн бұрын
The soap is great and always has been but the pods are more for convenience than anything else.
@v8tergt653 3 күн бұрын
I agree, They should’ve made the pod a little bigger so you only need one per foam cannon
@FABAutomotiveDetailing 21 сағат бұрын
Yes!
@v8tergt653 3 күн бұрын
You want thick shaving cream, takes longer to drop down and gives you more time before the soap dries on the surface , just my personal experience using runny soap like this vs thick shaving cream type.
@FABAutomotiveDetailing 3 күн бұрын
We all have a preference of what we like and that’s ok. I just wash as fast as I can so runny soap works better for me.
@v8tergt653 3 күн бұрын
@@FABAutomotiveDetailing honestly ph neutral soap alone doesn’t do anything at all than just lubricate the surface. So foam the car, use a pressure washer to rinse off as much as possible and the foam only help to avoid scratches, than foam again and use a good microfiber towel or mitt with the 2 bucket method. Ive done it a few times, rinse before without soap and with foam and theres 0 difference of how clean the surface gets without agitation. I use a touchless system by Chem-X and 9-10 cars it gets it nicely clean for a maintenance wash and passes the finger scrubbing test , also I use a deionized water filter so rinse off the last process and air dry and just dry with a towel the few spots where it drips down . By far the fastest method. I can finish a big 3 row Suv in 15min start to finish having everything set up already.
@KatrinaTrys 2 күн бұрын
The way it reads to me was to fill with water, add 2 pods allow the 2/3 mins to dissolve then attach top.... 🤷🏻♀️...
@FABAutomotiveDetailing 2 күн бұрын
@@KatrinaTrys Maybe so but the pods were in the water for atleast 30 minutes so I would have thought they would have dissolved even with the lid on. 🤷
@burresscounty 3 күн бұрын
Appreciate the honest review. Personally, dont think they're something I'm interested in.
@FABAutomotiveDetailing 3 күн бұрын
Always! Thanks for watching
@mnmn1665 3 күн бұрын
The pods look like an answer to a question that no one asked. Thanks for the review.
@FABAutomotiveDetailing 3 күн бұрын
You are welcome!
@hartlanddetailer5670 3 күн бұрын
Brian, thanks for the video. In my experience, when a company changes the packaging or how they distribute the product, you will be paying more? For companies, it is all about the bottom line. I prefer to measure my own products.
@FABAutomotiveDetailing 3 күн бұрын
Nothing wrong with doing it yourself! Thanks for watching
@arcforceworld 3 күн бұрын
youve probably already heard this, but the easiest thing would be to just pop the little pods and squirt the soap into the foam cannon. that way you kill all risk of getting that plastic jammed up in your cannon.
@FABAutomotiveDetailing 3 күн бұрын
Yes that would definitely work but for a proper review I wanted to do it the way they say to in the directions. Thanks for watching
@JhawkerZ 3 күн бұрын
Great demo. I think Mrs FAB is on to something lol. I think Griot's should put a suggestion of using hot water to help dissolve them. I think it would work better and less risk of getting anything in the pickup tube. Just my opinion on it. Thank you for doing this. The culture needs FAB.
@FABAutomotiveDetailing 3 күн бұрын
Thanks! I think hot water would definitely help dissolve it.
@timmclaughlin7576 3 күн бұрын
Great review Brian! You always give great honest reviews! ❤ your channel. Keep putting out the great content.
@FABAutomotiveDetailing 3 күн бұрын
Thank you Tim!
@raysfishroom2929 3 күн бұрын
Great video but I think you didn’t have to make excuses that you may have done something wrong pods not good in foam canon I too had problems. I also love the company that shouldn’t matter it didn’t work right. Ok thanks for your videos I enjoy them
@FABAutomotiveDetailing 3 күн бұрын
Thank you! I wasn’t making excuses just more or less wondering if I should have done something different. It worked great in the bucket.
@marklittleton1309 3 күн бұрын
Great review, Brian! I hope they don't discontinue the original Super Concentrated Car Wash product, because those pods don't look that helpful to me at all...
@FABAutomotiveDetailing 3 күн бұрын
Thank you!
@ronz101 3 күн бұрын
Penske, Ryder etc. have them in too Sometimes taken out... sometimes not. 😮
@michaelm1739 3 күн бұрын
Brian what is the PH rating on these pods? Thanks for another informative video
@archiepezek 3 күн бұрын
At 10:39 and 13:01 in the video, Brian said that they're PH neutral.
@FABAutomotiveDetailing 3 күн бұрын
They are PH Neutral
@richsmith3120 3 күн бұрын
Good review FAB.
@FABAutomotiveDetailing 3 күн бұрын
Thanks!
@jimflanagan6029 3 күн бұрын
Not bad, looks like you have to give the pods time to dissolve. Nice shirt.
@FABAutomotiveDetailing 3 күн бұрын
Yes sir! Thanks
@1stfrompuertorico568 3 күн бұрын
Super Brian!👌😜
@FABAutomotiveDetailing 3 күн бұрын
🤫 Don’t want the word to get out
@1stfrompuertorico568 3 күн бұрын
@@FABAutomotiveDetailing 😜😜🦸♂️ok Clark Brian 😜
@1stfrompuertorico568 3 күн бұрын
First!!!
@FABAutomotiveDetailing 3 күн бұрын
🏆
@mywa8314 3 күн бұрын
Real question is HOW LONG IT LAST
@longlivefreedom9853 4 күн бұрын
problem is you have no idea in the comments who works for the CCP or Maxpeeding rods........... ps... what a name MAXpeeding Rods
@larrythompson5617 4 күн бұрын
Fleet tracker. If it was law enforcementment you wouldn't have found it.
@number1pappy 4 күн бұрын
How was its performance and sound level after removing the original grease and properly applying the new grease actually on the gears?