Stated NO PROBLEMS. Yet it won’t even pass a simple smog check.
@teritennison6214Ай бұрын
Time lapse would be cool too.
@patrick60872 ай бұрын
A friend of might used a propane torch and scraper to remove the undercoating from is car. (914). He damaged his lungs so bad he did not survive. He was a good man, just messed up and inhaled too much toxic crap. Be careful.
@path38532 ай бұрын
Thanks, not my best work but it came out pretty good.
@williammucelli4182 ай бұрын
Very impressive work Pat!!!
@alfredsmalley254 ай бұрын
I know it's hard to listen to girls Jackson at your age. But sooner or later they'll be telling you what to do everyday. So go ahead and make your mistakes. But try to keep those lessons that you learned.
@gasholesgarage50834 ай бұрын
Yeah we all learn some lessons the hard way!!!
@williammucelli4184 ай бұрын
That plug has a drain and vent
@williammucelli4184 ай бұрын
It probably got clogged up from debris from the trunk
@randyross73394 ай бұрын
Glad you mentioned that you are going to be working on the porsche soon
@gasholesgarage50834 ай бұрын
Yeah I'm collecting more parts as we speak. My next goal is to hear this thing finally START!!!
@Zzus3215 ай бұрын
What happened to the 914?
@gasholesgarage50835 ай бұрын
Don’t worry, she will be returning real soon. Xmas took a big hit on the wallet. But with taxes coming in. Parts are getting ordered and she will be breathing to life real soon!!!
@kirstenspencer36305 ай бұрын
Ruined quary panal ? Noo way, just tig braze the little holes. NO DISTORTION AND VERY COMPATIBLE REPAIR. WOULD TAKE ME TWENTY MINUTES
@gasholesgarage50835 ай бұрын
The point was it never needed to be repaired that badly. Very easy to repair it properly without drilling a million holes in it!
@ScoutCrafter5 ай бұрын
When you’re 18 years old and have no money Bondo was your friend. When you’re 50 years old and have some cash you can do a better job. I guarantee you the 18 year old had more fun with the finished product. 😂👍
@path38535 ай бұрын
100%
@gasholesgarage50835 ай бұрын
Bondo is still our friend now, just less of it!!!
@pauldunn70005 ай бұрын
That wasn't to pull the dent out,,, it was to hold the body filler... The filler wants to peal up do to different expansion rates...
@gasholesgarage50835 ай бұрын
Pulled out properly it wouldn't need much filler was the point. Small amounts of filler doesn't need holes to hold.
@r.h.b.49805 ай бұрын
Cut it out weld in a patch panel
@gasholesgarage50835 ай бұрын
Thats the plan!!!
@user-ot1hn1yb6y5 ай бұрын
not ruined can be fixed easily in about 30 minutes...with mig...
@gasholesgarage50835 ай бұрын
The point was that it never needed to be ruined in the first place.
@user-jl7wn5nn7p5 ай бұрын
Hammer&dolly and yhen. Heat in dmall steas snd get a. Rag and quen h yo. Cool it wuick snd this. Pulls. Metal yught. Just. Keep. Doing ut. Yil you. Git it. Damn. Vlose. Put. Your. Bondi on snd. Dand file and. Walla
@gasholesgarage50835 ай бұрын
UM............OKAY
@nirmalperesh70215 ай бұрын
I cant see the holes properly. Is it drill holes or pits that happen when dent pulled
@user-ot1hn1yb6y5 ай бұрын
drilled its the only way they had to attach the puller back then before magnets and adhesive pullers...and painless dent repair ...
@gasholesgarage50835 ай бұрын
Unfortunately drilled. Since there is easy access from the insides NOT needed at all!!!
@jamesj80615 ай бұрын
Its always kin
@gasholesgarage50835 ай бұрын
This shit kills us😂
@MrLof85 ай бұрын
Hey Guys! What adapter, clutch, flywheel, starter are you using to mate the k24 with the Boxster s trans? Thanks
@gasholesgarage50835 ай бұрын
The clutch, flywheel and adapter all come from Kennedy Engineering. Starter is still the Porsche starter unless I get an aftermarket later!
@edjohansen2886 ай бұрын
I bought one for $3,600 that needs cats but I been driving it for a few months no big issues
@gasholesgarage50835 ай бұрын
Yeah the Black H2 I ended up buying is fricken awesome!!!
@briancavanagh70486 ай бұрын
Bit late now but did you ever consider the transverse front wheel drive honda motor mounted in the rear?
@gasholesgarage50835 ай бұрын
Absolutely, It was my first thought actually. But once I found the Renegade Hybrids kit for the Boxster S I went that route to keep it inline. If I did it over again I would do the transverse because I think it would of been cheaper and we would be way farther along.
@jesuscital67806 ай бұрын
No gloves? Yikes!
@monsta1k7986 ай бұрын
Why do you seem to expect some ones used item to be in like new condition? Other than the oil leak the truck doesnt look bad to us!
@gasholesgarage50835 ай бұрын
It was listed as having NO ISSUES and to pass smog. Both lies!!!
@path38537 ай бұрын
Big changes coming to this one!
@path38537 ай бұрын
Thanks Bill. We do like the way it looks but when it's done it won't be recognizable.
@williammucelli4187 ай бұрын
Leave has is ,looks great!
@marklangren31427 ай бұрын
Another butcher, please play with your Japanese cars and leave automobiles alone
@gasholesgarage50837 ай бұрын
Clearly you didn't see what we started with. This poor car was completely hacked up and would have headed to the crusher if we didn't show it some love.
@marklangren31427 ай бұрын
@@gasholesgarage5083 let it go to the crusher rather than being butchered
@marklangren31427 ай бұрын
Por-sha
@williammucelli4187 ай бұрын
Looking great!
@path38537 ай бұрын
Thanks Bill
@path38537 ай бұрын
Nice deck comments in: 5 4 3 2 1
@Level_Up_Nation7 ай бұрын
They also make a RWD oil pan for the K20/24 so you can site the engine up right head up.
@gasholesgarage50837 ай бұрын
Yeah But the Kennedy adapter plate has it clocked so it wouldn't matter.Plus it sits lower on the angle and it wouldn't clear the decklid sitting straight.
@williamprice39297 ай бұрын
All right, when you buy a use vehicle it is with the understanding it is "as is." That being said, if the seller writes in the ad, "no issues," then as is and no issues means it shouldn't have problem number one. You can sue and win; the seller is guilty of fraud, and ithe no issues statement in the ad proves this.
@gasholesgarage50837 ай бұрын
Yeah the guy was pretty shady all around!
@Level_Up_Nation7 ай бұрын
It just dawned on me that you are building a Del Sol if they would have put the engine in the rear. Where did you get the K24 trans adapter? I did not see one on the site, the 914 I got my hands on has a Honda V6 in it from a 96 Accura NSX and not sure if it's worth using, it has the adapter from the same company you got the K24 one from.
@gasholesgarage50837 ай бұрын
Kennedy engineering is where the adapter plate came from. But I purchased it through Renegade Hybrids in Las Vegas. The NSX V6 is awesome but NSX people actually remove it and put the K24 in it's place.
@Level_Up_Nation7 ай бұрын
@@gasholesgarage5083 Yeah, the engine is good, spins and everything, a few hairs from the firewall pulley wise, guy spent a lot of time making motor mounts and everything for me to pull it all out lol.
@Level_Up_Nation7 ай бұрын
If anyone is going to do this K-POWER makes RWD intakes and other parts for putting a K20/24 in a strightline configuration.
@gasholesgarage50837 ай бұрын
Yeah my list of parts to buy is long and expensive!!!
@Level_Up_Nation7 ай бұрын
@@gasholesgarage5083 yeah, when it comes to K engine those parts make you become a kid in a candy store, you want everything but your wallet is walking out the door 😂
@gasholesgarage50837 ай бұрын
@@Level_Up_Nation Yeah with Xmas here I can't get shit until February.
@kurtmartin83167 ай бұрын
Son pointed to all components wrong, probably caused confusion amongst us degenerates.
@Level_Up_Nation7 ай бұрын
I am 6's, so me fitting in one of these is out of the question? Planning on buying one with a v6 Honda swap already started. (1976 914)
@gasholesgarage50837 ай бұрын
I'm 6'2 so wish me luck!!!
@Level_Up_Nation7 ай бұрын
@@gasholesgarage5083 you good I'm 6'5 and fit in it fine, little snug but once you are in, it's all good. Getting out, now, that's a different story. 😆 Got to grab the top of the car and just pull yourself out or top off just stand up and step over the door 🤣
@gasholesgarage50837 ай бұрын
@@Level_Up_Nation Yeah but is your window raked back???
@Level_Up_Nation7 ай бұрын
@@gasholesgarage5083 🤔 have not even noticed, kinda the least of my worries lol, it's a 73, but if it is an issue will just 3D print the window frame bigger, was planning on putting a 911 vented roof on it anyways. In the process of 3D scanning the whole car.
@gasholesgarage50837 ай бұрын
Good luck my friend!!!@@Level_Up_Nation
@Level_Up_Nation7 ай бұрын
How did the swap work out? I just bought a 76 with a Honda Accord swap, they used the Kennedy Swap Kit.
@gasholesgarage50837 ай бұрын
Not done yet, Xmas has been quite a hit on my wallet so I'm taking a little break. It's really close to getting it started. we will continue the project in February.
@gasholesgarage50837 ай бұрын
Not done yet, Xmas has been quite a hit on my wallet so I'm taking a little break. It's really close to getting it started. we will continue the project in February.
@Level_Up_Nation7 ай бұрын
@@gasholesgarage5083 I am torn between putting in a Rotary in this one and selling the V6 Honda motor, it being a 89, I do not know anything about it, not even sure if I can sell the adapter plate. K24 914 would be fun, I called Kennedy and sadly they said they don't make those adapters. 🤷
@preciador67 ай бұрын
Nice selling my 05 for 13500.
@gasholesgarage50837 ай бұрын
Good Luck my Friend!!!
@travismull9446 ай бұрын
How many miles does it have on it
@preciador66 ай бұрын
@@travismull944 210,000
@steinjohansen31427 ай бұрын
Porsche is pronounced with the "e", not "posh". In American English try to say "Porscheh"
@gasholesgarage50837 ай бұрын
Yeah WE all say it wrong😁
@adamburns24528 ай бұрын
I have a 03 has lots of issues but less than 70,000 on it I like it still runs good not putting any money into it lol
@kenchinn32758 ай бұрын
How can I contact you guys I have a 2009 Hummer H2 I'm trying to sell it
@gasholesgarage50838 ай бұрын
Message us on instagram. Gasholesgarageonlyfans. But we have bought one.
@sean.3798 ай бұрын
always said that truck is just awesome 👌
@gasholesgarage50838 ай бұрын
Thanks🙏, and yes I think so! Pat not so much!!!😂
@muds178 ай бұрын
I knew a guy like the dude in orange once...
@williammucelli4188 ай бұрын
Nice job guys!
@path38538 ай бұрын
Thanks, Bill.
@jakobmead51878 ай бұрын
Don’t get hit
@Sweyin4208 ай бұрын
I wouldnt, im pretty good with degreaser 😂
@gasholesgarage50838 ай бұрын
How do you like to remove this crap???
@Zzus3218 ай бұрын
I can't believe how rust free it is for a 72. What motor are you using??
@path38538 ай бұрын
I can't believe how little rust it has for a 51 year old car either. For the motor I'm going to retain the 360 because it runs so good. I will be updating the fuel and ignition systems though.
@Mr10usdad8 ай бұрын
Where are you guys located?
@gasholesgarage50838 ай бұрын
Southern California, I'm in Murrieta to be exact and Pat is about 45min from me.
@Mr10usdad8 ай бұрын
This is a cool project!
@gasholesgarage50838 ай бұрын
Thank you and I think so. I'm just hoping I actually fit in it when it's done!!!
@gasholesgarage50838 ай бұрын
Thank you and I think so. I'm just hoping I actually fit in it when it's done!!!
@Mr10usdad8 ай бұрын
@@gasholesgarage5083 I am 6.1 and I fit.
@angeloc7008 ай бұрын
This was a little bit of a bummer because I thought you were going to actually show something happening. I have a 1973 long nose 911 shell and was going to swap either a K or some kind of electronic motor build.
@gasholesgarage50838 ай бұрын
Well we are just average JOE'S working on our project's one day a week. But there are tons of episodes now and they show all the way up to where we are now. Which the engine and trans are in. It's not running yet but getting close. I think your car would be pretty badass with a K series engine in it. Good luck in which ever way you choose!!!
@adhuffman98 ай бұрын
Just subbed! Love this content. It's like being in the garage with my dad again. I'm looking at the H2s currently on the market. I'm looking at an 07 with 95k-ish miles. Any input on whether it's a worthy purchase? They currently have it listed around $20k and looks to be in great cosmetic condition. Can you give an update on fuel economy you're seeing? I'm coming from an 08 F250 6.4L diesel that I average around 12.7 mpg out of. I'm hoping it'll be somewhere in that range so I don't see a big change in fuel expense.
@gasholesgarage50838 ай бұрын
Hard to say if it's worth it without seeing it. But with the mileage it sound like a safe bet. As far as MPG it really matters were you live. I"m in CA with my stupid smog laws. I only average 11.5 mpg. But a friend of mine who lives in Arizona gets 17mpg. All he has done is free flow exhaust, high band O2 sensor and a full custom tune by a skilled shop. I'm going to get a second computer for my H2 so I can just change it out with the O2 when I have to smog. Really glad you enjoy our shenanigans and THANK YOU for the sub!!!