Hey guys great work. The finish looks great. I’m helping my dad with the same project. This edge binding is the missing link for us to finish. I can’t help but notice you guys had a roll of it. The link in you description is only 5ft sections? Did you order from Amazon? I’m just having a hard time finding a roll like you used. Thanks!!

Excellent video, thanks for sharing.

How do you de energize?

We go down there a lot because my family has a house down there. We have never been where you are going. A suggestion I have would be to take the ferry from Port Bolivar to Galveston. The best part is that the ferry is free to ride. (just don't do it on a holiday week or weekend because it has very long lines.)🚐

I have the same fridge and the water tray gets filled to the rim I keep it on electric and on level 5. It doesn't seem to go out the tube because the tray fills all the way up and I have to dump it.

Nice review, appreciate it. I just had my camper tires replaced due to a belt breaking last week sitting at a campsite of all things. Really glad we caught it at the campsight but a TPMS system would really be ideal. Looks like a good setup with the Tireminder. I own an older rig so this would be a great setup for monitoring my truck and camper as well. The only drawback I can see is that the display looks like it would not be well placed on top of the dash due to how reflective it is. Easy enough to remedy. Happy Camping!

I have a 2023 F350 that is doing the same thing

The complete absence of Dampers ( shock absorbers ) probably had more to do with bouncing the contents of the Camper .

What size is the washer on bottom hinge. Tks

Fantastic informative vid. Thank you.

My display just spins and u cant set it. no hot water

Will be doing my first 2022 F350 XLT 2x4 dully by my self tomorrow. We normally have it done at the dealer when we're RV'ing, but now, we have a home again so I can do it my self now till we get on the road again next winter. We tow a 42 foot 5th wheel when we're traveling. Factory ordered Oct 2021, waited 6 months! She's got 43000 on and it's be a great truck.

Nice work!

Great video. Thank you for sharing

After reading all the comments Herb brought up my question at which no one responded too. .....that is by adding this upgrade it seems to me it will increase the probability of a bent axle. I currently have one driver's side rear bent axle. Need to do more research.

K heres my problem maybe its the same u had trailer brakes lock up and does like a jerk. I can see the tires locking up. Sometimes it doesnt do it but mostly every single time while slowing down itlocks up brakes then u get a jerk. Even at low speeds. I have tried 2 different trailers same thing my dad hooks up his truck zero problems to same trailers is this the problem u were having

I only have 30 amp no propane winter in BC Canada my fuses would blow

Thank you!

Hey, you have the first video I've seen that shows the shower drain pipe, and why we shouldn't use those little drain cleaners, nicely done, Sir! But I still have a clog, and I have the feeling I'll need to approach it from the gray water hook up side. It's not gonna be neat... 😮

Great video! Thank you for taking the time to put that together, I’m hoping mine is just a loose wire! : )

We have the same fridge

Do you know why my fridge is not keeping my food cold?

What make is the unit?

Link is not working. Very nice video

I have water dripping behind the drip tray. What did you use for the deflector on the fins?

Thanks for sharing! What suspension equalizer do you have and what ply tires?

I took my first trip with my sumosprings and they’re amazing. I just kept thinking while driving, that it’s an absolute shame that people can’t experience what these feel like because if they could, they would buy them. I was reluctant because of the price but now, I will never own another travel trailer or 5th wheel that doesn’t have sumosprings on them. These are amazing on my 5th wheel.

If I’m not mistaken, color means different weight category: blue for 3000 to 5000 and black 5000 to 8000 GAWR…

Thanks for the video. Always like to check how others do this process. I pull the screens out of the facets just to keep them clean from the scale while flushing. Also, your inside dial will be on for about 12 seconds, blink off and repeat. This is the Truma telling it needed the de-calcification process run. We are Ft in a Vilano. Safe travels

Currently unavailable on Amazon!

If you have an outlet tester, you can plug it into your generator and watch it fail over the floating neutral. I don't get why they don't do this in a inverter generators out of China, especially the 120V variety. There is an excuse for larger 240V generators because some people hook these into their homes and already have a ground-neutral bond. However for the 120V only generators, it doesn't seem anybody hooks them into stationary house power, so it doesn't make any sense to not have ground-neutral bond there. You should always have one and only one ground-neutral bond in your system. It is not safe otherwise. Your surge protector will either not be able to work or in this case refuse to work because it can't do its job without this ground-neutral bond. So when it refuses to turn on, it is actually doing the only thing it can do at that point to keep you safe, which is refuse to accept that power. Here is another way to put it. I have not heard legitimate stories of any of these Chinese inverters or inverter generators burning out due to someone setting up a ground - neutral bond. At the same time the NEC codes are there for a reason and everything is designed around them. So either you add a single ground - neutral bond when you can verify that there is none, which is very easy to check for or you operate an unsafe system. You can just look and see the label and even if you don't, just put the outlet tester in there to get a quick answer. You should have a tester anyway for your home / apartment as often there is something wrong there, especially with older homes and slumlord management for apartments. If you find you need to add this single ground - neutral bond, but are afraid of damaging your inverter / inverter generator, remember that not complying to NEC codes, especially around a ground - neutral bond can lead to you being electrocuted and subsequent death. This can be just touching any electrical appliance with a metal surface such as your toaster oven as they all may end up energized at the same time with no path back to source until you complete that circuit with your body unwittingly. Everything that is supposed to be safe to touch instead being energized is a very bad place to be all because you didn't have this ground - neutral bond there. So I would say better to burn out that PoS inverter generator now than to burn out your body later. If the inverter generator does fry, which I am pretty sure it won't, it is a lot easier to replace than your body.

Thanks for sharing.

Do I need one of these if I'm just going to run a window air conditioner in my house and maybe the refrigerator too I have the same type of inverter generator. Thanks

This works for RV's with outside enclosures. Inside an enclosed space the legal limit people can transport is 90 lbs, the cylinders must be upright, held by a strap and turned off while driving. I'm surprised more RV camp sites aren't offering a 100 lb tank to use for free and renting a cargo dolly to move it for $20 a day.

3000W is just under 28 amps; but the 110V 36” power cord on these units is 14 AWG. If that wire isn’t getting hot then they are lying about it being 3000W.

Hi, I have a 2019 F-350 with a trailer brake issue, who was the dealer up north who helped you fix? I’m in everett Thanks!

Since the time you posted this video have you noticed if it made a difference in resolving the problem?

what if hot water from remote water heater eventually come through the device, ,will it overheat? I guess it needs cold water to cool down?

Excellent review!! Always buy a dehumidifier that is bigger than you need.

I just put some on my ford ranger. They seem pretty good on road and helping prevent body roll on cornering. Off road I suspect they are going to be too hard and offer less articulation in axle movement. I'm going to leave them on for a while see how they go.

Did you have to prime the new pump with water first? Or is that always not necessary?

I just bought a 2021 Solitude 378MBS. I checked the shower connections because I watched your video- Thank God and Thank you that I did. Every one of those connections were loose. You saved me a huge problem I’m sure. Thanks again! Chris..

Very helpful video for fixing my latch. Thank you!

Keep an eye on your frame where the sumo springs contacts .You are adding shock load to the frame

So, to verify, the TCM, is the Brake Controller Module? So, it was the part, and not the settings accessible with Forscan?

How/where do you get the pin weight?

Link to product?

i read you need to have green knob hooking to propane tank and not the black as you have?

Can propane tanks freeze?