la mejor explicacion para usar la fibra laser, jamas puede encontrar un tutorial en espanol que te dijera todo lo que nos esenaste. saludos bendiciones

New sub thanks to this video! I am concerned about learning how to use the rotary!

What is the foal lents? Send me here please

THANKS so much brother

Late to game on this but what size machine is this? 60w?

use the steps in the chuck jaws and you wont have to worry about it being strait

I know this is an older video, so I hope you respond. But why did the change of diameter from yeti to arctic change the focal length? Please and thank you

Hi could you help me with team Viewer to engrave on rotary with ez software

Hi sir good evening..Nice job.sir I have a question possible to help me out My machine is 50w and I want gold and silver engraving and photos..possible to tell me how much speed and power and frequency I put.. Thanks

It is said that EZCAD is a poor copy of SCAPS SamLight, can you confirm?

The round head clamp is different on my rotary. How do I change the head from the one I have. It came with my laser. Mine doesn't have that big chuck key. It's just sprung.

Whats about the parameters, I think i have a problem in that part. :( May you show them please?

Thanks for the info. my laser is marking that rectangle box in the background. Any idea why?

Bom dia!! Esse que esta sendo meu maior problema e o parâmetro do Rotativo ele fica copm umas linhas, se aumentar fica com maias aparência, nos copos cone da Stanley embaixo no fundo , fica muito junto e em cima na boca fica separados com linha maiores , como resolver ?

I don't know what to do. I have a 30w fiber laser, set my ezcad2 the right way, and it's just jumbling the text together. I'm stumped

I heard that mocking bird in the background and it sounds like you're in Florida! We have them everywhere here in St Pete FL.

Laser engraving can be significantly improved with these chemical substrates, the process is shorter and uses less energy: kzfaq.info/get/bejne/oJZ2lNyqu92ypmw.html

Thanks,very helpful. I have a 50W JPT and I tried your settings but it takes more than 1 pass of the 3 loops. Not sure why?

What brand of Fiber laser engraving machine did you use please?

Hello can u show what do u have inside the Param(F3) Thank you

Thank you i have just ordered a 50W JPT and this is just the help i need

Bro why is this shit so complicated and hard to understand

I am buying this!

Have you tried to engrave in something smaller ? Like 12-14 mm round stock

I tried using the 3mm split size on a a solid color object on the rotary and I get a noticeable line every 3mm instead of a solid object, what am I missing?

if you mark 2020 savior in horizontally rather then vertically it will be more good looking

Great video!!! thank you for taking the time for it...cant wait to see more from you!

No entiendo como en un video en inglés, los subtítulos son en inglés. Entiendo que este no es un problema del autor del video, sino de los anormales de youtube. Gracias cabrones!!! I don't understand how in a video in English, the subtitles are in English. I understand that this is not a problem of the author of the video, but of the abnormals of youtube. Thanks bastards!!!

Can't wait to watch more. Just starting and needing more knowledge

My dad served in the navy on subs. Would you be willing to share that design with me? Please.

thank you so much for your help . I would like to you to show us the parameters for engraving a external pattern on a round band that fit all around Thank you

Awesome video!! hope to see more ...have a great 2022111

Yeah doing it wrong... Get the right jaws to start with and clamp from the small end...

Hey, good morning from Santa Rosa California! Whose rotary chuck is that? Now I'll enjoy your vid maybe my question will be awnsered. Thx, Barry

Excellent video! How would you compare this to a standard co2 laser for tumblers? Which would be best for engraving in bulk? We are planning to purchase a traditional co2 laser with rotary tool.

All those parameters work with CO2 marking machine

@7:02 you mention "if your laser start and laser stop are off it ill give you problems" how do you figure those setting out. I am trying to do a graphic similar to yours and i get gaps (3mm gaps) when the thing rotates

I know a fix for your 9.35 probleme.! There is a way to mark in 0.15 lines or 0.10 its just a trick. ^^ Select object / Ungroup / Hide / Mark Now your probleme is fixt!

I think you would benefit from casting an epoxy mandrel for the various cups that you mark. It would save you most of the time you spend handling the workpieces. like 90%.

NICE video what is your laser ?W and lense size? Please and thank you!

I have 2 quick questions. 1. What does the focal length do? I guess if you have an automatic focal adjustment it moves the head, but if you don't, does it actually do anything? 2. Are you using a fiber or an RF? I have an RF and always have to clean it with LA's finest and its a pain in the butt!

Once you have your settings set for a Yeti 30 oz, can you just save those settings are a profile? On some of the US built machine's custom software, it seems easier to use in that you can just select your product and go. Thoughts on this? Thx much

Cool... Dolphins ... Submarine Qualified Myself

Morning , I’m new to all this but have purchased a laser and a rotary piece I use the same program that you use but for the life of me I can not make it work using an image !! Works perfectly when I just input text but when I copy customers logs onto the program, then got to rotary mark . Press f2 nothing happens at all!! Driving me insane , but I’m self taught watching your videos. Is there anywhere I can go for training in the uk?

DO YOU OFFER CLASSES

Every time i try to do an import my Ezcad2 crashes. Any tips ?

Do you have a video on your F3 parameters? Cause once I engrave it once and go to redo it ....it rotates 3/4th of the way back and ruins my engraving.... It sometimes will not rotate and I have to line my rotary with the lighting cause I can't move it once I'm in the rotary mark

So this setting works pretty well for me but between each split there is a roughly .5 mm space that is not engraved. Any thoughts on how to eliminate these? I've had this thing for a year now and these have been the best setting so far but the image is still not coming out at a level of quality that I feel could be sold to my club members.

Hello there,I've watch your video a couple times to understand some of the main priorities as dimensions, width and height for when you engrave the LOGO, i heard that usually you have to match you hatch dimension ( 0.02 for example ) to your split in order to make it run and engrave properly, and do as many passes as necessary to have a good finish, my question is i follow those steps very carefully but for some reason on some of my logos i end up with a split mark, do you ever change the focus length ? or your parameters when you click on the rotary tab ? if you would have time to do a team viewer of course with your cost time, please let me know, i would be very interested on paying for your services and help, maybe is something small I'm missing but who knows ☺ [email protected] that's my e-mail if you can help thanks

what das continius do?