Enjoyed watching that. Glad you got this one put back together.
@Metallic-Sun6 күн бұрын
I'm definitely gonna hold onto this for it's historical val... <shatters> Lol 😂
@coin-opcorner6 күн бұрын
Don't watch my other videos... you might see that joke a couple times...
@ShaddySoldier6 күн бұрын
No lucky strikes? Camels will do, i suppose.
@thisshouldbeentertaining33866 күн бұрын
I'll raise your Sears florescent light bulb with a 1960's Sears chainsaw.
@coin-opcorner6 күн бұрын
I would defintely ACTUALLY hold on to that for its historical value
@waynegram89077 күн бұрын
How do you know if a DC motor has Wind down or has NO Wind Down? does it say on the motor specs
@coin-opcorner7 күн бұрын
@@waynegram8907 Not typically, I don't think
@waynegram89077 күн бұрын
@@coin-opcorner why did the original motor have wind down? The wind down was used for what reasons?
@coin-opcorner6 күн бұрын
@@waynegram8907 Just the way it was designed, I imagine it wasn't intentional.
@waynegram89076 күн бұрын
@@coin-opcorner yes but I'm saying how to get a brand new motor that has Wind Down in the specs. It seems that the mechanism assembly was made for the timing of the motors wind down? when you replaced the original motor with a brand new motor that doesn't have the wind down, the mechanism assembly timing is off?
@coin-opcorner6 күн бұрын
@@waynegram8907 Yeah I don't imagine you can, most machines would benefit from a motor that stops immediately, so this machine is probably the one fringe case where you actually need a motor with wind-down.
@DingleDarn7 күн бұрын
M I N T C O N D I T I O N
@overtimearcade7 күн бұрын
We’ll always have Kreamy Korner…
@Metallic-Sun6 күн бұрын
Overtime!
@oliviastrouse10107 күн бұрын
It took you about 100 years to make this… I liked the jokes.
@coin-opcorner6 күн бұрын
How would you know how long it took to make?
@oliviastrouse10106 күн бұрын
@@coin-opcorner….
@Wisdomforthechurch7 күн бұрын
The music, the cinematography, the skill of the craft, and yes, the cargo shorts - this is peak art making and I salute you sir
@coin-opcorner7 күн бұрын
@@Wisdomforthechurch This comment is sacred
@jerryvoluptuous95437 күн бұрын
Fascinating, educational, entertaining. ❤
@overtimearcade7 күн бұрын
@@jerryvoluptuous9543 10 out of 10. Would watch more.
@davidfrederick600318 күн бұрын
My late father became skilled an "emptying" these claw machines. He would fill trash bags FILLING them with dolls. We had a walk in closet with at least 4-6 trash bags jammed filled with dolls. He would give them over to Children's Hospital of Philadelphia. In 1992 when Hurricane Andrew destroyed Homestead, FL. The news stations called upon the area for donations to fill an 18-wheeler truck. The lines of cars for donations ended up filled 6 18-wheelers. We gave them 6 full trash bags FILLED with dolls for the children.
@atomstarfireproductions869518 күн бұрын
You should clean and relubricate the gears for the pusher Or not since it adds to the nostalgia factor with noisy motors
@coin-opcorner18 күн бұрын
@@atomstarfireproductions8695 I also don't clean the bathroom at my house, because it also adds the nostalgia factor of the local arcade.
@JamieVegas21 күн бұрын
what is that coiled spring on a screw to the lower left of the back of the mech?!
@tylerlondon505227 күн бұрын
What is that buzzing soldering tool?
@coin-opcorner26 күн бұрын
It's a desoldering gun- it melts the solder, then the buzzing is the sound of the vacuum pump sucking up the solder.
@tylerlondon505227 күн бұрын
I hit the thumbs up as soon as I saw the plug.
@andysodyssey817429 күн бұрын
Hey I just purchased a claw machine that was working . When I arrived after one or two plays it stopped dropping and grabbing . It is the exact same machine you are working on in this video . Could you suggest what I should look for on this cocktail claw to fix this problem. Since it failed it also does not return to home position . I’ve never worked on a machine like this so any information is greatly appreciated
@coin-opcorner29 күн бұрын
Reach out to me on FB and I'll help you: facebook.com/profile.php?id=100055156784869
@Metallic-SunАй бұрын
Arcade cab mating calls. 😂
@abrahamvalentin3225Ай бұрын
Where did you get that fixture, and what’s the brand name. because i might need a new fixture in to replace the one I have.
Hey man, I subscribed, I'm a huge fan of the videos. I can't wait for more possible repairs.
@frankkirkpatrick44522 ай бұрын
case in that you just took off when you were cleaning that's missing a piece on my left side
@frankkirkpatrick44522 ай бұрын
I have the exact machine that you're working on I really wish you could fix mine
@alexdragon92962 ай бұрын
*MUY BUENOS TUS VIDEOS,ME GUSTAN MUCHO.MAS CUANDO PARTICIPA EL GATO JAJAJA.LO DEL FUSIBLE DE LA MESITA PACMAN QUIZAS ES LO PRIMERO QUE UNO TIENE QUE REVISAR PERO CUANDO TENES MAS CONOCIMIENTOS EMPEZAS A REVISAR COSAS MAS COMPLICADAS EN LA PLACA,ME PASO ALGO PARECIDO JAJAJA.(SOLO ERA EL FUSIBLE!!! JAJAJA).GRACIAS POR TUS VIDEOS DE REPARACIONES.SALUDOS*
@coin-opcorner2 ай бұрын
Thank you!
@Frog_Puppet3 ай бұрын
Love the use of "We Have Heaven"
@coin-opcorner3 ай бұрын
Tell the moon dog, tell the march hare
@Arcadenut13 ай бұрын
Was the original flyback bad or did you just replace it?
@coin-opcorner3 ай бұрын
It was the source of the original cabinet fire.
@jacklick3 ай бұрын
Well done. That was entertaining!
@garyrose79623 ай бұрын
welcome back
@CameronMcCasland3 ай бұрын
This is the Game of thrones of arcade videos
@coin-opcorner3 ай бұрын
With just as much nudity
@overtimearcade3 ай бұрын
I now know why this video took so long - you were negotiating usage rights with Iron Maiden!
@coin-opcorner3 ай бұрын
"I'm waiting, in my cold cell, when the KZfaq notification bell, begins to chime..."
@thisshouldbeentertaining33863 ай бұрын
This video was sponsored by craftsman. 90's bob Villa would be proud.
@thisshouldbeentertaining33863 ай бұрын
Lolz trying to exercise the 666 beast with a Bible.
@waynegram89073 ай бұрын
So was the problem the transistor part numbers for the vertical circuit?
@coin-opcorner3 ай бұрын
No, those transistors were the same I believe. Those particular transistors just happened to be shorted.
@waynegram89073 ай бұрын
@@coin-opcorner So the new transistors fixed the problem because the resistor in the middle of the transistors blew up so that bad resistor might have damaged those other transistors.
@coin-opcorner3 ай бұрын
@@waynegram8907I think the first two transistors were just bad out of the box
@waynegram89073 ай бұрын
@@coin-opcorner oh ok thanks, most arcade games used chicklet capacitors any reasons why they used chicklet capacitors instead of non-chicklet types?
@coin-opcorner3 ай бұрын
No idea
@ocsrc3 ай бұрын
Was this from Japan ?
@coin-opcorner3 ай бұрын
Nope. US cabinet.
@M2P19603 ай бұрын
Do you have any video on changing out a Northwestern from candy to 1 in capsules? I got all the parts but when I use coin it just lets a mass amount of capsules drop
@coin-opcorner3 ай бұрын
Might have the blocker installed backwards like I did towards the end of the video
@jamesowens25593 ай бұрын
Kansas Power album in the claw machine.
@coin-opcorner3 ай бұрын
Only the finest of bands from Coin-Op Corner
@lonthrall56133 ай бұрын
Excellent video! I came here looking for info on the lock mechanism, and the more I watched, seems the better it got. Great work with the kids!
@coin-opcorner3 ай бұрын
Thank you!
@ProphetOfClaws3 ай бұрын
Super long shot here but do you still have this machine? 2nd question.....Are you interested in selling it?
@ProphetOfClaws3 ай бұрын
You know what the crazy part is about that machine. I think I see it on facebook marketplace now. It has the same damage in both spots as the one in your video.
@coin-opcorner3 ай бұрын
Yep, that's my machine. Sold it.
@stoneinthefield14 ай бұрын
Your favorite machine is mine too and was made and designed by my late uncles company. Oak Manufacturing in Vernon Ca. I have the same machine given to me by Lane Weitzman my uncle from his personal office collection. Thanks for rebuilding these OAK machines and keeping them alive.
@coin-opcorner4 ай бұрын
Wow, that's amazing! Glad I could keep the legacy moving!
@stoneinthefield14 ай бұрын
Goo Gone mixed with WD 40 works real good to remove sticker residue and keep the residue slime from resticking.
@EpicFurbynerd76YO4 ай бұрын
hahaha!
@cameraofchaoshollywood5 ай бұрын
Would you happent to know anyone who repairs cigarette machines in northern california? I have a Rowe Riviera 25 and it lights up but doesnt do anything as well.
@mixme86555 ай бұрын
New subscriber sir always watching your videos very interesting❤
@robertfreeman19666 ай бұрын
Where did you get the florescent light fixture? Power supply?
@coin-opcorner6 ай бұрын
Fixture: www.amazon.com/gp/product/B07KFTWSH7/ref=ppx_yo_dt_b_search_asin_title?ie=UTF8&psc=1 Power Supply: www.arcadeshop.com/i/930/midway-power-supply-kit-1.htm
@joshchannels73786 ай бұрын
What are you doing with the old square one
@davedewdney7 ай бұрын
I just came across your videos, just subscribed I live in the UK, just starting out on sweet vending machines, is there any way you can change the mechanism to take a different coin?
@shawncruiksh8 ай бұрын
Awesome episode! I enjoyed the Zaxxon explosions. 😆