You are very skilled. I'll enjoy following your progress on your own homestead!
@PlankmillsКүн бұрын
Thankyou!
@HecorToponКүн бұрын
Los aserradero para el Ecuador desde que precio lo tenemos ??? gracias por la información
@PlankmillsКүн бұрын
Unos 20.000 dólares. dólares americanos, con el que yo tenía. Si obtiene un paquete más básico, costará entre $ 10,000 y $ 15,000. Sé que envían a muchos países diferentes, pero no sé si envían a Ecuador. A ver si puedes encontrar Norwoodsamills.com
@stevewhitaker14748 күн бұрын
Good video. I advise to use your goggles to protect your eyes.
@charliesaul7299 күн бұрын
As usual, everything you build is amazing. Even though it's not "authentic" consider shooting spray foam in gaps to fill completely to eliminate bug and wasps and rot for longevity!
@billroberts38649 күн бұрын
The stairs will last for many years because of your quality craftsmanship. Blessings to you.
@Plankmills9 күн бұрын
Thankyou Bill!
@goatstead8149 күн бұрын
Nice job, that whole scribing thing looks complicated. I guess once you do it a couple of times it becomes easier
@Plankmills9 күн бұрын
Thankyou! It was kinda. Right.
@joecallahan337918 күн бұрын
Nice build young man.
@Plankmills18 күн бұрын
Thankyou
@peteklinner38019 күн бұрын
The guy is cute but the video is boring.
@Plankmills18 күн бұрын
Thankyou for watching.
@keithsimnacher89021 күн бұрын
Looking at buying sawmill like this one what upgrafes do you have o. This mill
@Plankmills19 күн бұрын
Hi, I had the basic hydraulics Log clamping and roller toe boards. That’s it. But I found that it was usually sufficient.
@jamesstroud8018Ай бұрын
You are quite a sawyer no matter you are running. 👍
@PlankmillsАй бұрын
Thankyou
@williamprophett9148Ай бұрын
Whats happening, brother? Good to see you back. Been banging out the testing on the HD36V2. The new guide system is pretty nice. Hope all is well with you. Glad to see you sawing!
@PlankmillsАй бұрын
Hey! Yeah, very nice! Thankyou
@kjellltveit9753Ай бұрын
Good to se you back missed your sawing videos. Myself located in Norway hav a HD 36 and this mashin take big lumber. Have upgraded with electrik raising and lowering of sawhead and electroninic scale..perfect. No hydraulic so far. Have lerned that sharp blade and quality blade is the key to nice planks. Checked and tested Woodland mills, ..not for me :) Thanks again
@justinrussell760Ай бұрын
Norwood beats Woodland hands down. Woodland Mills is nothing but a hobby mill, I don't like anything about them and the deck looks flimsy to me. I wouldn't want to try producing quantity with that. Can't do upgrades either. Norwood now has a new improved roller bearing system out for $450. Much more adjustable. Watch William Prophett, he shows the entire installation process and it makes some beautifully straight cuts.
@williamprophett9148Ай бұрын
I agree with you and thank you. However, Plank Mills was the first guy to convert over to roller guides on the HD36. He is the reason that I decided to change over. I'm not sure what his angle is "here," but he's a good sawyer.
@PlankmillsАй бұрын
That’s kinda what I thought until I used a woodland. They’re actually built a lot better than it looked like to me. I agree that it’s more of a “hobbyist” mill if you will. And yeah it’s definitely slower. Because of the manual log handling. But I do think you can add some stuff on. Or change some things. We plan on getting the better log clamps and modifying them to make them adjustable vertically.
@PlankmillsАй бұрын
@@williamprophett9148Thankyou, There are things I like about both mills.
@robertalexander6637Ай бұрын
Why did you get rid of your Norwood as I thought your shed and set up was quite good for a young fellow. Ihave a LM 29 with a 16 hp Brig and a 20 ft heavy duty trailer it sits on with Power feed up and down . Also Woodlands Tooth setter and Sharpener. I am a retired Builder and treat mine as a hobby and cut timber for people who bring trees to me. Bandsaw Milling for a business is a hard call for a small setup. I think the woodlands mill is good for the money. I would put it on a trailer to get extra height for Dogs and clamps it gives you more versatility for hydraulics and toe boards down the track. Good milling 😊
@PlankmillsАй бұрын
@robertalexander6637 I sold it because my parents sold their place and move out of state, so I had to move as well. As my mill shed was at their place. And I also moved to TN so I decided to sell. Now I wish I had kept it. But the money came in handy as I got married last September.
@heyyoubuddy6749Ай бұрын
I have the hd36v2 and love it. I hope to get hydraulics in the future. I was looking at the hm130 max on the trailer. Woodland mills make a good tough machine. When ya learn your machine then you can make clean accurate lumber. Just a learning curve. If I buy a piece of land in Alaska I will have a woodland mills sent there rather take my Norwood. Get the mill setter sharpener, the trailer package. Basically the whole shooting match with extra parts.
@PlankmillsАй бұрын
Yeah! Very nice. I have cousins that moved up there and built a log cabin. Their channel is called @montanahaven - Alaska edition Yeah I like the woodland mills build. I just wish I could combine some of the Norwood features to make it more productive. Someday I really want to build my own mill. I have some ideas I want to try.
@jamesstroud8018Ай бұрын
That was a great assessment. 👍
@cabinmanАй бұрын
I have the 126 with the 14 HP engine and the power is quite good. The scale I use is the white one which is setup with the kerf factored in. Depending on how many boards you’re cutting or the thickness each scale will yield a different result. But when cutting 1x’s on a 14” log it holds very accurate. Cutting 4” thick planks will yield much extra thickness. I also have the latest clamps and they are much easier and quicker although they can be a bit annoying sometimes. I’ve never had the bark issues on the bunks but I can see what you mean. I do like the quality of the steel and the thickness and how heavy built it is. There are a lot of spots where the edges of the paint come off or crack then start rusting a little.
@PlankmillsАй бұрын
Oh Nice! I like the Norwood’s scale much better and it was way more accurate in my experience. Also it has many different thicknesses of lumber scaled with the kerf factored in. So that was another feature that was super handy.
@markamilisitsАй бұрын
Awesome video's.. that is assuming that your bunks are level. I really do not think it matters if the blades is level in needs to be parallel with the bunks. So you can level the blade but also measure down from the blade to the bunks on each side to verify they are parallel to each other. Have a nice day
@PlankmillsАй бұрын
Agreed, 👍🏼
@dsandmansandy870Ай бұрын
The Norwood is the same way
@PlankmillsАй бұрын
Not in my experience. Occasionally I had a small cant like a 4x4 pop out, but that was probably just because the hydraulic log clamp only clamped to like 3 1/2” if I remember right.
@dsandmansandy870Ай бұрын
@@Plankmills probably not with hydraulic clamps. Haven't had the privilege of working with those
@tonydeeugenio1489Ай бұрын
buy the kit everthing u need comes with it jus bought one
@jamesmarks8099Ай бұрын
Had a portable about 20 years ago. Designed a two sided cam system. One side was short to support down to a 2 inch cut, and the other was for logs, down to about 7 inches i think.
@PlankmillsАй бұрын
Oh cool! The guy that owns this mill and I are talking about getting the cam style log clamps that you can get for this mill. And then modifying it to where it can slide up and down.
@NoBonesPressedАй бұрын
Its called a rough cut for a reason.... They're not made for accuracy at all...
@PlankmillsАй бұрын
Maybe, but if the cant is a 1/4 inch off square and flailing around threatening to leave the saw altogether! that’s a little too, “rough” for me. Haha
@NoBonesPressedАй бұрын
@Plankmills I would have modified it myself, too..
@brandonloefflerАй бұрын
It’s hard to see anything
@PlankmillsАй бұрын
Yeah, It’s subtle but it’s there. We’ve had every blade in that box have a bend in it at the weld. And they wobble back and forth on the band wheels every time the weld goes around. Has anyone else had that problem from woodland blades?
@CC88MLАй бұрын
You got the crappy clamps. Mine has different one that works much better
@PlankmillsАй бұрын
Oh nice, I’d love to get those!
@Ubergamer256Ай бұрын
Why do you turn the first face cut outside instead of press it against the back stops? Are they not perfectly 90/square to the bunks? My only concern with this HD36.
@PlankmillsАй бұрын
I always checked it either with a level or a square, just to be sure it’s square. And If your turn the first face out, you can cut into clean wood sooner, vs cutting through bark and potentially hitting dirt or rocks. But usually I’d turn the first face down onto the cross bunks. Another reason to set the first face out, is if the log has taper, I like to raise the small end to compensate. So If I turn the first face out, I can do both my compensated cuts first, at the same time. Vs having to do one, and then lower the toe board and then do the second one on the third cut. I hope this makes sense.
@jamesstroud8018Ай бұрын
That was a great idea!👍👍 That made me appreciate my HD36 a little more. 😁
@PlankmillsАй бұрын
Do you have hydraulics or all manual?
@jamesstroud8018Ай бұрын
@@Plankmills My HD36 is all manual. I bought the ramps and loading winch along with the rapid dogging and rolling system log rest actuators, 2 two foot extensions, 4 board off loading rollers, trailer package, carriage cover, the quick-click indexing detect set works-scales, a couple of extra log dog/log rest receiver sets, quick drain oil valve and spare parts kit when I bought the mill in November of 2015. I would like to add the exact same amount of hydraulics that you did to your HD36. I am 74 years old now and that amount of hydraulics would help a lot. I liked the way that you could maneuver the logs and cants with that setup.
@PlankmillsАй бұрын
@@jamesstroud8018 nice! I count figure out how to use the quick- click indexing set works. And yes I’d say the basic hydraulics are well worth the money. I had the log clamping system, and the roller toe boards.
@jamesstroud8018Ай бұрын
@@Plankmills Yes, I remember your set up. That was nice. It took me a while to figure out the quick-click set works too. In reading your comments on the Woodland Mills HM122, I think the modifications that you and your friend are planning to make on it will improve it a good bit. I’ve never run a Woodland Mills sawmill but in 2015 I considered buying a Woodland Mills HM126 which was the widest that Woodland Mills offered at the time but I wanted to saw wider logs so I bought the Norwood HD36 and I like it but I still like the green ones too for the money. I like the simplicity of them.
@PlankmillsАй бұрын
@@jamesstroud8018 yes! Woodland is pretty good for the money. However there are definitely some functions I like about the Norwood better. But I think I like the build of the woodland better. I’m making a video kinda comparing things about my Norwood vs the woodland. Hoping to have it out in the next few days.
@Jared-BrubakerАй бұрын
Looks like you’ve got a lot to keep you busy for years. Is that in the ledges?
@PlankmillsАй бұрын
Haha I sure do!! Yes it is.
@Jared-BrubakerАй бұрын
@@Plankmills nice, I guess you were talking about Daniel’s sawmill then.
@PlankmillsАй бұрын
@Jared-Brubaker yes I’ve been milling lumber on it for our house. I’ve posted a few sawing videos already.
@am1frigiderАй бұрын
Hey man, good luck with stuff and all. Hope you get some lemonade after a hot day's work :)
@PlankmillsАй бұрын
Thankyou! I try to take care of myself! 😉
@blight2539Ай бұрын
Right on!
@jamesstroud8018Ай бұрын
Glad to see you back to sawing again. Woodland Mills are great for the money.
@PlankmillsАй бұрын
Thank-you! It has been fun! I agree! However, There are a few things I’d love to change about them, but I’m impressed with its cut performance!
@robs8882Ай бұрын
@@Plankmillsbetter cuts than your Norwood?
@PlankmillsАй бұрын
@@robs8882 it seems to do better than the Norwood yes. Until blades get dull, but this is also a smaller mill so it seems like the blade has more stiffness because the band wheels are closer together. So that could have something to do with it too, but I’m impressed with its cut quality. But have a few gripes with different features.
@PlankmillsАй бұрын
@robs8882 with a sharp blade, yes! not really when the blade gets dull though.
@jamesstroud8018Ай бұрын
@@Plankmills I think the band wheels being closer together probably play a part in that too.
@bobcaygeon4533Ай бұрын
Very nice! Now it can be used and admired for many generations to come. My grand parents have been gone for many years but I still miss them. They gave me such comfort and knowledge as a kid.
@PlankmillsАй бұрын
Thankyou! And yes! Grand parents are such a blessing.
@linzierogers50242 ай бұрын
First time ever viewing a hybrid methos of turning logs. Neat idea.
@nickieroyse85852 ай бұрын
How long did/will it take to make your money back.
@Plankmills2 ай бұрын
It’s not my mill, I’m just using it. A friend of mine and I got a bunch of logs together, and I’m helping him mill them up on his mill, But with this mill at the low price point I imagine it wouldn’t take long. And I’m impressed with its performance! Especially in pine. Compared to the Norwood that I had.
@heyyoubuddy67492 ай бұрын
Hi buddy I’m glad to see ya out making sawdust!! Thanks for sharing! God bless you and the family!
@Plankmills2 ай бұрын
@@heyyoubuddy6749 hey buddy! Thanks man ! God bless you to!
@FrankHampton-yv3dy2 ай бұрын
Awsom video, we saw pine on a Norwood bandmill, it's good to watch someone else work, great setup you got there🇺🇲✝️
@bobcaygeon45332 ай бұрын
I have the same mill. Thx. for the tip. I have not had to move the set screws yet. 3 blade changes later, the blade still tracks true on the wheels. Just curious, how often do you have to adjust the tracking screws.
@Plankmills2 ай бұрын
Your welcome! If I remember right, sometimes I’ve have had to adjust almost every blade change.
@bobcaygeon45332 ай бұрын
@@Plankmills Thx. for the quick response. I’ll keep an eye on it. Cheers from Ontario. Just subscribed to help your channel. Now I have to binge watch your videos to catch up.
@Plankmills2 ай бұрын
@@bobcaygeon4533 not a problem! I think I mentioned on one of my videos that I found it cuts better if the blade is positioned slightly further back on the band wheels, my theory is that it gives it more rigidity in the leading edge of the blade. So I’d usually run it with the bottom of the gullet flush with edge of the rubber pulleys
@solidsunny1112 ай бұрын
Top! Glückwunsch! :-))
@jamesstroud80182 ай бұрын
That’s a good start. It will be good to see you milling again. Looking forward to seeing whatever you build.
@Plankmills2 ай бұрын
Yes indeed! Thankyou! Me too! Haha Planning to do a small single level house With cathedral ceilings, with rough sawn beams from these trees for rafters. And roof framing. Exposed beam rafters with T&G on top Then rafters and insulation and roof on top of that. Similar to a log home roof system. And I thought about doing half-log siding and making look like an authentic log cabin from the outside. But inside just normal framing.
@jamesstroud80182 ай бұрын
@@Plankmills That should be really nice. Will be beautiful!
@heyyoubuddy67492 ай бұрын
Hi buddy it’s good ya see ya out working in the trees. I’m thinking working with a small mill will be different a lil more work, but that’s ok, making saw dust is always fun!! I’m looking forward to the build!
@Plankmills2 ай бұрын
Hey you buddy! Good to hear from you! Yeah! I think so too! Yes! Thanks hopefully starting soon!
@jamesstroud80182 ай бұрын
That is a really nice piece of equipment!
@Plankmills2 ай бұрын
Yes it was! well built too1
@bobcaygeon45332 ай бұрын
Have the same sawmill for four years. I was about to move it to a new location ( 2 hours away on hwy). I had totally forgotten how to lock the cutting head down. Thx for the video. Anything I should worry about moving it so far?
@Plankmills2 ай бұрын
Awesome! Glad I could be helpful! I’d recommend putting a post or small log on the from end to give it ample tongue weight. Other wise I noticed it was too well balanced. But I also had an extra bed extension on mine. And make sure your lights work. And stop every so often to make sure the carriage head is still secured tightly. But not to over tighten them. I sheared one of the bolts off by over tightening it.
@bobcaygeon45332 ай бұрын
@@Plankmills Awesome my friend. Greatly appreciate the info. Where are you? I’m in Ontario, Canada.
@Plankmills2 ай бұрын
@bobcaygeon4533 your welcome! I’m just across the puddle… haha in Michigan. But I sold my mill and move to TN last fall. Which I wish I wouldn’t have sold the mill. But I’m actually over here right now for a wedding.
@bobcaygeon45332 ай бұрын
@@Plankmills Cheers. All the best in your new home.
@jamesstroud80183 ай бұрын
Very professional!👍
@jamesstroud80183 ай бұрын
Love the music. I had no problem hearing you. 👍
@Plankmills3 ай бұрын
Sorry about the poor quality audio. I this was my first video using a new camera I got. So I have to figure out how to get the audio sounding good.
@jamesstroud80183 ай бұрын
I like the scripture written on the green wall in your sharpening shop. Eph 2:10👍
@Plankmills3 ай бұрын
Yes!! My sister who enjoys painting did that.
@goatstead8143 ай бұрын
Hey glad to see you back! That sawmill has seen better days and definitely has missed the periodic maintenance schedule. Frontier has just come out with a new mill, the OS 35. Worth looking into, probably the best bang for your buck right now. Pretty sure they have a hydraulic option for it.
@Plankmills3 ай бұрын
Hey! Thankyou! It’s good to be back! I’ve got a logging video coming soon! Getting some logs for my house build, using mostly rough sawn, hopefully coming this summer. Oh interesting! I guess I won’t need a mill at this time because the fellow that I’m buying land from would be my neighbor as well. and he said I can use his mill. He’s got a little woodland mill.
@jamesstroud80183 ай бұрын
Great video. That one has definitely seen a lot of lumber. I prefer the vertical stops and clamps too. Cook’s do make good sawmills. I wish Norwood would offer a diesel engine. Keep your videos coming. 👍
@Plankmills3 ай бұрын
Thankyou! Yes it had! from what I could tell it didn’t make very consistent lumber anymore. I’d be happy with a Honda, I guess Koehler is pretty good too, but Briggs are just not that great! I had to have mine rebuilt once. It was around $900. The governor came apart on the inside and had to have a bunch of stuff replaced inside the crank case. The repair guy said it was over-revved I guess I was running to high RPM’s so it would be good to check yours and adjust if needed. Just look up the rpm specs for your specific one. Then I had trouble with it for a while seeming to have a sticky throttle. But after a while with returned to normal.
@jamesstroud80183 ай бұрын
Yes, I think the Honda engine is a real good engine. I have changed my engine oil to the Valvoline racing oil VR1, high zinc, as your mechanic recommended. The biggest thing that I don’t like about that B & S Vanguard is the non adjustable, (government regulated carburetor). I have to let off the gas slowly at the end of the cut to keep it from back firing. Those carburetors are very sensitive to ethonol gasoline (more government stuff) too. I had to switch to ethanol free. Glad you are back on KZfaq. Thanks for the information on the B & S engine. I will check that out.
@Plankmills3 ай бұрын
Oh nice!! 👍🏼 Mine did that quite a lot too. I mostly use rec fuel (100% gas) Or premium.
@jamesstroud80183 ай бұрын
I really hated to see it go. I really liked watching you run it with the limited amount of hydraulics that you had on it. I have no hydraulics on mine and I know you know how tough that is from hearing you say that you started out with no hydraulics. I have thought about adding just what you had on that one because I don’t really need the loading arms and think they would mostly just get in my way and I think I would rather push the saw than have auto feed because I like to feel what the saw is doing and as for as power up and down, that crank handle that is on it works pretty good and helps keep me in shape. 😂 If I could find the right buyer for my HD36 I think I would sell it and buy an Hd38 and add the hydraulic log stops and clamp to it. The reason for my thinking on that is for the increased throat capacity above the blade on the HD38.
@jamesstroud80183 ай бұрын
I forgot to mention the roller toe boards. They looked like they worked great on your mill also.
@Plankmills3 ай бұрын
Yes! I certainly agree! Where are you located? I may be your buyer! I’m located in TN. Although i would like to go with the HD38 for several reasons. The bigger cut throat and capacity. And also the better Honda motor! But there is a guy were planning to buy property from here who has a woodland mills mill he said i can use.
@jamesstroud80183 ай бұрын
@@Plankmills I am in north western Horry County, South Carolina about 40 miles from Myrtle Beach, SC. I like the Woodland Mills too for the money.
@Plankmills3 ай бұрын
@@jamesstroud8018 oh cool! I’ve been to Myrtle beach! I’ve never ran a woodland mill, but hopefully soon I’ll get the opportunity. I don’t like there blade guide system, I’d prefer the roller guides but we’ll see how it does.
@jamesstroud80183 ай бұрын
@@Plankmills What part of Tennessee did you move to? Tennessee is a pretty state and I think you will like it.
@jamesstroud80183 ай бұрын
Congratulations!
@Plankmills3 ай бұрын
Thankyou!
@natalieskoien21653 ай бұрын
I've heard you should not install standing seam roofing on a low slope roof. We are building a patio cover that has a slope of .5/12 and we want to do standing seam roofing on it. We live in Idaho and get quite a bit of snow load depending on the winter. Thoughts? I've also heard you shouldn't do nail strip install on low slope, only mechanical.
@Plankmills3 ай бұрын
I’m guessing that’s because of ice damming. If that happens or even a lot of snow and the water could possible seap in through the ribs if it has enough water standing or puddling under the snow and ice. But the only scenario I’ve seen a low slope roof like this leak is where there was a low slope valley that wasn’t installed correctly. Are you saying the roof is 1/2 of 1/12 pitch?