Hi Scott. Question: How many harnesses does a Columbia have? I have a 2009 so it's probably similar to yours. Thanks.
@Starkeyfamilyfixing2 күн бұрын
Well every truck is ordered different, so you have main harnesses and sub harnesses. Mine would be very different, my truck does not use the def or the filters , only an Egr system.
@idrismansaye885210 күн бұрын
I learned a lot thank you sir
@Starkeyfamilyfixing2 күн бұрын
You’re very welcome !!!
@caselink507617 күн бұрын
What happens if you use the screw driver and it doesn't start does that still mean it's the solenoid
@Starkeyfamilyfixing15 күн бұрын
All you’re doing is crossing the posts on the solenoid to bypass the key switch. If the truck turns over and does not start then where you start the truck at key switch or solenoid will not matter , you have other issues.
@clementwilson473919 күн бұрын
Exigent schooling
@Starkeyfamilyfixing19 күн бұрын
Thank you !!!
@publicEnima22 күн бұрын
is it the same process for the drive belt on top? I am assuming you have to move the deck belt out of the way and put the drive belt on?
@Starkeyfamilyfixing2 күн бұрын
Yes , take the long mower deck belt off or out of the way to remove the main drive belt above. I would suggest putting the back of the mower on ramps to give yourself room . This belt is a pain to change do you the room that you have to work with
@cholpon-ata26 күн бұрын
I like the beard bro.
@ussenterp6526 күн бұрын
It's a good idea to test the new one before you put it in
@ussenterp6526 күн бұрын
Mine is 2200 for a oem part at peterbilt
@Starkeyfamilyfixing15 күн бұрын
That’s a good price for being at a dealership
@caselink5076Ай бұрын
How can I tell When air dryer is bad. When I push in the trailer brakes I hear an air leak behind the dash so I decided to change the mv3 valve in the back still same problem. When I am driving air pressure goes up to 75 PSI then stops then when I get to a stop light the air pressure drops to 65 psi and buzzer goes on the driving again goes up to 75 PSI with the buzzer constantly on. Is it my dryer? But when I am parked all brakes are set it builds up pressure no problem
@Starkeyfamilyfixing22 күн бұрын
If the air dryer is bad nominally it blows air out constantly or keeps releasing on and off all the time. . If I were you I would set the trailer breaks and release the truck breaks and do a walk around . For air leaks . Normal if the air will not build up it’s your air governor that the problem is. But if your hearing air flow thru your brake valves , that means it is a lot of air flowing out somewhere. Air bag , brake chamber, leveling valve, are the normal things to cause this .
@Homemade240sxturboАй бұрын
Great detailed video. Keep it up!
@StarkeyfamilyfixingАй бұрын
Thank you !!!
@royalflush8173Ай бұрын
i drained the air tank and drained airdryer and still had to use a cheater bar to get it off
@StarkeyfamilyfixingАй бұрын
Sometimes that still happens!
@stevenrobinson2381Ай бұрын
All these vids I see here-what is up with the suicide load ? I hauled flatbed back in the 90's-and I NEVER EVER once loaded them beast suicide. Yes-I hauled mostly step deck spread axle flats-but did occasionally pull a straight flat. The 1st. coil I hauled - way back in the summer of 1994-out of Algoma Steel in Sault Ste. Marie CN-weighed in at 46,000 pounds. Belly loaded that beat & loaded side to side-Algoma in those days WOULD NOT let you load it otherwise & you HAD to use their dunnage-beveled 4X4 oak. 7 chains & 2 straps. Delivered to a steel warehouse off the 294 in Midlothian IL. Hauled a bunch more over the years-NEVER loaded suicide.
@StarkeyfamilyfixingАй бұрын
Yeah if it’s ordered this way then that’s the only way a company will take it . Sometimes they give an option. It’s called a suicide coil due to how it’s loaded , if it breaks free then it’s going to roll thru the cab of the truck . You can get them all the way up to 80,000 pound single coils . That’s the largest I have seen .
@Ha1364-sm6geАй бұрын
کیسه هوا کج بسته شد،،به علت کج بودن فنر اصلی محور
@StarkeyfamilyfixingАй бұрын
Sorry I only know English
@Bob86ZZ4Ай бұрын
What about that solenoid portion that bolts onto the top of the valve body? Has the electrical connection to it? Aren't there any parts in there that should be replaced when doing this job?
@StarkeyfamilyfixingАй бұрын
No it’s either good or bad , and can be pretty pricey.
@Bob86ZZ4Ай бұрын
Thanks a bunch for this very detailed video!! I'm going to tackle this job soon on my Autoshift transmission. I can't locate that O-ring kit you showed us. K-3484. Where did you get yours?
@Bob86ZZ4Ай бұрын
Never mind, found the kit at a nearby truck parts dealer. Weller Truck Parts.
@StarkeyfamilyfixingАй бұрын
Dealership $16
@StarkeyfamilyfixingАй бұрын
If it’s working then there is no sense in replacing it
@bryanritts213Ай бұрын
Glad to see you back on youtube. I was worried about you
@StarkeyfamilyfixingАй бұрын
Me too ! Sorry its been so long ! I have had alot going on in my life the last several months !!!
do you think I could check the BOTTOM portion of my transmission on my F150 .. xlt .. ?? if you don't know that's fine. I just have this tran fault prob and wanted to know if these could help fix my code by allowing me to get under the belly and undo the bottom of my transmission ..
@StarkeyfamilyfixingАй бұрын
I think so , I pull my 2500 hd Silverado onto them and I have plenty of room when changing the oil and transmission filters . Now keep in mind mine is 4 wheel drive so it sets a few inches higher then a 2 wheel drive. But even if yours is 2 wheel drive you should be fine.
@e_thegod5303Ай бұрын
@@Starkeyfamilyfixing ok then thanks for the brief speedy response, my truck still saying trans fault, I'm hoping these ramps will help me be able to at least see if I can do the job under it. But yup thanks , have a good one.
@chrisquinonez3591Ай бұрын
Not real sure why you wouldn't put a link to where you got the carburetor kit or even mention it???
@StarkeyfamilyfixingАй бұрын
Actually I thought I had that on there ! Give me a bit to get home from work and I will see if I can fix that !!! Thanks for pointing that out !!!
@alexnavarrete8065Ай бұрын
I had a solinoid but when I tried to change it I couldn’t remember what wire goes where so I couldn’t put the new one on. So we by passed it but what side effects will it cause?
@StarkeyfamilyfixingАй бұрын
Well under the right circumstances a total meltdown. On an overload the solenoid will burn out first . Always take a picture on your cell phone so if you have an issue then you can look at how is was .
@alexnavarrete8065Ай бұрын
What happens if you don’t have a solinoid?
@StarkeyfamilyfixingАй бұрын
Your going to have one , could be in a different location
@MisfitMills804Ай бұрын
Hey great video sir‼️🫡🫱🏼🫲🏽do you have the actual number?? i believe we have the same model
@StarkeyfamilyfixingАй бұрын
Sorry I do not
@dannysmith11692 ай бұрын
Great video thx
@StarkeyfamilyfixingАй бұрын
Thank you !!!
@upperdarbyriders2 ай бұрын
Thanks,I just started flat bed 2 weeks in…I am learning a lot from these vids
@StarkeyfamilyfixingАй бұрын
That’s great !!! Thank you for watching !!! Let me know if you have any questions.
@stevencote71182 ай бұрын
Really enjoyed your videos. Thanks Steven Cote 👍🏻👍🏻👍🏻👍🏻👍🏻
@StarkeyfamilyfixingАй бұрын
Thanks for watching !!!!
@leapers1242 ай бұрын
Repeatedly going bad
@StarkeyfamilyfixingАй бұрын
I have had this happen to me, sometimes the parts stores sale a cheap grade product and pass it off as a factory replacement.
@robertocasillas5652 ай бұрын
Thanks you help me a lot I have same problem whit my trailer but you save mi life again thanks
@Starkeyfamilyfixing2 ай бұрын
Your welcome !!!
@lifeitsgreat2 ай бұрын
When you open your switch are u able to spin the fan by hand is that Normal
@Starkeyfamilyfixing2 ай бұрын
Fan is free , but if you’re asking while the engine is running. 1st off if the engine is running absolutely for no reason touch the fan !! If it turns on your hand and fingers can get chopped off !!!!! But the reason why the fan will still spin even when it’s disengaged is there is still some rolling force from the bearings . Now with the key switch turned off this will default the fan solenoid cutting the power , which turns the air pressure off and locks the fan . It’s a safety built in so your engine will not overheat. Default engine fan runs with no electric and no air pressure. Hope this answers your question.
@lifeitsgreat2 ай бұрын
@@Starkeyfamilyfixing yes sounds about right yea the only way I can spin it free is with the truck engine off and just the key in the on position all seems to be working fine
@sofianeakkouche13682 ай бұрын
Thank you for the video
@Starkeyfamilyfixing2 ай бұрын
You’re very welcome !!!!!!!
@lifeitsgreat2 ай бұрын
Ur a legend dude
@Starkeyfamilyfixing2 ай бұрын
Thank you !!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!! I try my best !!!!!
@hillbillysamurai2 ай бұрын
Thanks brother. I hate the way this is set up but now I got it fixed
@Starkeyfamilyfixing2 ай бұрын
Believe it or not I remember the setups on the older riding mowers that my father had bought when I was younger and they were much worse then this !! I remember a JCPenney pennies rider , cub cadet, as some Sears mowers . Sad this was after a couple years they were ready to be replaced. I will tell you this Dixie chopper I own has been great I have had mine 16 years .
@Outlawbuckettrucker2 ай бұрын
Ain’t got no sound in it… mmmm hmmm That’s part of bucket trucking tho… keeping it clean. A 3/8 durapro liner will help that slide out a lot sooner and keep you from shoveling so much…. Also it saves a ton of wear on the floor
@StarkeyfamilyfixingАй бұрын
It has a liner in it , this mud is so tacky that it clings to the liner .
@StarkeyfamilyfixingАй бұрын
Sorry about the sound I don’t know what happened.
@OutlawbuckettruckerАй бұрын
@@Starkeyfamilyfixing 🤢
@user-sc5pm2hv5m2 ай бұрын
Same issue right now
@StarkeyfamilyfixingАй бұрын
Oh geez !! Sorry to hear that.
@joemabry6852 ай бұрын
Did you move that bar back before u tighten that tensioner
@StarkeyfamilyfixingАй бұрын
I just got it close
@thomashe24962 ай бұрын
What are they use it for Steel coil
@StarkeyfamilyfixingАй бұрын
Steel coils are how sheets of steel are transported in larger quantities. So at the factories that receive these that simply roll out what they need and parts are stamped out as they go . Like car fenders , washing machine panels, really about anything
@thomashe2496Ай бұрын
@@Starkeyfamilyfixing ok
@Saltacokote2 ай бұрын
by far this is the best explanation step by step detailed video tutorial wow THANK YOU 👍
@StarkeyfamilyfixingАй бұрын
Thank you !!! I try my best to!!!
@Hawd74.3 ай бұрын
Thanks
@Starkeyfamilyfixing2 ай бұрын
You’re very welcome !!!!
@jonathanking65463 ай бұрын
The trailer I am looking at is a 45’ steel trailer.
@Starkeyfamilyfixing2 ай бұрын
Good deal !!!
@jonathanking65463 ай бұрын
Thank you, thinking about buying a flatbed and hauling containers to resell, since I already have my authority. Kind of a side hustle.
@Starkeyfamilyfixing2 ай бұрын
Good deal !!
@calsmith79023 ай бұрын
Extremely informative 😅
@StarkeyfamilyfixingАй бұрын
Thank you I really try my best !!!
@michaeldavis34873 ай бұрын
I want to thank you for video, I had changed mower deck, the mower would blogged down in heavy grass, would have to stop, let blades catch up , I thought belt was wore out, but after watching your video, the belt tensioner I placed wrong , I repositioned belt tensioner, it cuts like a scolded dog, doesn’t blog down now, thank you so much, you differently know your stuff
@Starkeyfamilyfixing3 ай бұрын
Thank you and thank you for watching !!
@wilberleivaguerrero94273 ай бұрын
Great video my friend very meticulous and helpful, thanks.
@Starkeyfamilyfixing3 ай бұрын
You’re very welcome !!!!!
@adrianluna64313 ай бұрын
Thanks
@StarkeyfamilyfixingАй бұрын
Your welcome !!!!
@JUSAGUYNKY3 ай бұрын
Craziest
@StarkeyfamilyfixingАй бұрын
Yeah fun fun lol 😂
@alloutjoy31723 ай бұрын
Beautiful sound.
@ronclaros3 ай бұрын
Wonderfully made video. Thank you very much for explaining the tensioner / spring ordeal! I recently bought a used Dixie Chopper Silver Eagle zero turn (50") - possibly a 2006 model (the parts number have a 2006 number). Machine claims to have around 380 hours: not sure if it's accurate though. This machine runs very slowly. And the speed gets further diminished when going up hills and when cutting grass. I've changed the hydraulic fluid and both hydraulic filters. Old hydraulic oil didn't appear bad or overly used. The 3 belts appear in good shape - not sure how old they are though. I see 3 sets of belts. The one you just replaced in this video I thought it was the drive belt since the mowing blades belt goes across the deck. But perhaps the drive belt is the one above the one you replaced, and this one simply allows for the mower belt to operate. In your experience, do you think I should tighten the drive belt - same spring/nut mechanism a bit more in case it is not engaging the zero turn's speed potential. What's the rule of thumb when it comes to tightening these belts (1/4" inch when pushing the belt?). An old sticker on the machine shows the 3 belt sizes and even a clutch. Do you think the clutch may also be the reason for the machine not to speed up as much as it should? Again, thank you very much for this video. You pretty much nailed it! And please keep making more of these videos for Dixie Chopper Silver Eagle!
@Starkeyfamilyfixing3 ай бұрын
What kind and brand of fluid did you use when you changed the filters and hydraulic drive fluid ? And do you power wash the underside on the mower where the drive belt is ? Both are very important questions.
@noebilvaldez75303 ай бұрын
Great idea, thank you, sir. My engine just started doing that and I don’t have the money with repair right away so this is really good.
@StarkeyfamilyfixingАй бұрын
Good deal , just remember this is not a permanent fix